lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/2] dt-bindings/display/bridge: sii902x: add optional power supplies
Date
Hi Laurent & Rob :-)

On 04/25/2018 11:01 AM, Laurent Pinchart wrote:
> Hi Philippe,
>
> Thank you for the patch.
>
> On Wednesday, 25 April 2018 10:53:13 EEST Philippe Cornu wrote:
>> Add optional power supplies using the description found in
>> "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)".
>>
>> There is a single 1v2 supply voltage named vcc12 from which cvcc12
>> (digital core) and avcc12 (TMDS analog) are derived because according
>> to this data sheet:
>> "cvcc12 and avcc12 can be derived from the same power source"
>
> Shouldn't the power supplies be mandatory, as explained by Mark in https://
> lists.freedesktop.org/archives/dri-devel/2018-April/172400.html ?
>

Laurent,
Many thanks Laurent for your comment, I understood the merge of the two
1v2 power supplies but missed the "mandatory" part... maybe because this
patch (with optional power supplies) already got the reviewed-by from
Rob, I thought the discussion thread you pointed out was applicable
"only" to totally new driver documentation.

So, on my side, as a "new user" of sii902x IC, no problem to put these
power supplies as mandatory instead of optional properties but I would
like to be sure this is applicable to both old and new bindings doc : )

Rob,
could you please confirm these power supply properties should be
"mandatory"?
if yes, should we then modify other optional properties like the
reset-gpios too in the future?

Big thanks to both of you,
Philippe :-)

>> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
>> ---
>> Documentation/devicetree/bindings/display/bridge/sii902x.txt | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>> b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index
>> 56a3e68ccb80..9fb41fc9af51 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>> @@ -8,6 +8,8 @@ Optional properties:
>> - interrupts-extended or interrupt-parent + interrupts: describe
>> the interrupt line used to inform the host about hotplug events.
>> - reset-gpios: OF device-tree gpio specification for RST_N pin.
>> + - iovcc-supply: I/O supply voltage (1.8V or 3.3V, host-dependent).
>> + - vcc12-supply: TMDS analog & digital core supply voltage (1.2V).
>>
>> Optional subnodes:
>> - video input: this subnode can contain a video input port node
>
\
 
 \ /
  Last update: 2018-04-25 14:21    [W:0.049 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site