lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] sc16is7xx: Check for an error when the clock is enabled.
When the clock is enabled, check if there is an error. Otherwise
clk_get_rate() can be called without enabled clock.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 0814e8d5da2b ("sc16is7xx: enable the clock")
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
---
drivers/tty/serial/sc16is7xx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 65792a3539d0..243c96025053 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1168,7 +1168,10 @@ static int sc16is7xx_probe(struct device *dev,
else
return PTR_ERR(s->clk);
} else {
- clk_prepare_enable(s->clk);
+ ret = clk_prepare_enable(s->clk);
+ if (ret)
+ return ret;
+
freq = clk_get_rate(s->clk);
}

--
2.17.0
\
 
 \ /
  Last update: 2018-04-24 18:19    [W:0.052 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site