lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c
Date
Add support for USBH (USB Host) to STM32MP157C SoC.
USBH is a USB Host controller supporting the standard registers used for
full- and low-speed (OHCI controller) and high-speed (EHCI controller).

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..cc06d6b 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>

/ {
#address-cells = <1>;
@@ -167,6 +168,25 @@
#reset-cells = <1>;
};

+ usbh_ohci: usbh-ohci@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usbh_ehci: usbh-ehci@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
+ status = "disabled";
+ };
+
usart1: serial@5c000000 {
compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>;
--
2.7.4
\
 
 \ /
  Last update: 2018-04-24 13:26    [W:0.056 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site