lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 06/10] misc: pci_endpoint_test: Add MSI-X support
From
Date
Hi Alan,

On 24/04/2018 07:59, Alan Douglas wrote:
> Hi Gustavo,
>
> On 10 April 2018 18:15 Gustavo Pimentel wrote:
>>
>> Adds the MSI-X support and updates driver documentation accordingly.
>>
>> Changes the driver parameter in order to allow the interruption type
>> selection.
>>
>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>> ---
>> Documentation/misc-devices/pci-endpoint-test.txt | 3 +
>> drivers/misc/pci_endpoint_test.c | 102 +++++++++++++++++------
>> 2 files changed, 79 insertions(+), 26 deletions(-)
>>
>> diff --git a/Documentation/misc-devices/pci-endpoint-test.txt
>> b/Documentation/misc-devices/pci-endpoint-test.txt
>> index 4ebc359..fdfa0f6 100644
>> --- a/Documentation/misc-devices/pci-endpoint-test.txt
>> +++ b/Documentation/misc-devices/pci-endpoint-test.txt
>> @@ -10,6 +10,7 @@ The PCI driver for the test device performs the
>> following tests
>> *) verifying addresses programmed in BAR
>> *) raise legacy IRQ
>> *) raise MSI IRQ
>> + *) raise MSI-X IRQ
>> *) read data
>> *) write data
>> *) copy data
>> @@ -25,6 +26,8 @@ ioctl
>> PCITEST_LEGACY_IRQ: Tests legacy IRQ
>> PCITEST_MSI: Tests message signalled interrupts. The MSI number
>> to be tested should be passed as argument.
>> + PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number
>> + to be tested should be passed as argument.
>> PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
>> as argument.
>> PCITEST_READ: Perform read tests. The size of the buffer should be passed
>> diff --git a/drivers/misc/pci_endpoint_test.c
>> b/drivers/misc/pci_endpoint_test.c
>> index 37db0fc..a7d9354 100644
>> --- a/drivers/misc/pci_endpoint_test.c
>> +++ b/drivers/misc/pci_endpoint_test.c
>> @@ -42,11 +42,16 @@
>> #define PCI_ENDPOINT_TEST_COMMAND 0x4
>> #define COMMAND_RAISE_LEGACY_IRQ BIT(0)
>> #define COMMAND_RAISE_MSI_IRQ BIT(1)
>> -#define MSI_NUMBER_SHIFT 2
>> -/* 6 bits for MSI number */
>> -#define COMMAND_READ BIT(8)
>> -#define COMMAND_WRITE BIT(9)
>> -#define COMMAND_COPY BIT(10)
>> +#define COMMAND_RAISE_MSIX_IRQ BIT(2)
>> +#define IRQ_TYPE_SHIFT 3
>> +#define IRQ_TYPE_LEGACY 0
>> +#define IRQ_TYPE_MSI 1
>> +#define IRQ_TYPE_MSIX 2
>> +#define MSI_NUMBER_SHIFT 5
>> +/* 12 bits for MSI number */
>> +#define COMMAND_READ BIT(17)
>> +#define COMMAND_WRITE BIT(18)
>> +#define COMMAND_COPY BIT(19)
>>
>> #define PCI_ENDPOINT_TEST_STATUS 0x8
>> #define STATUS_READ_SUCCESS BIT(0)
>> @@ -73,9 +78,9 @@ static DEFINE_IDA(pci_endpoint_test_ida);
>> #define to_endpoint_test(priv) container_of((priv), struct pci_endpoint_test,
>> \
>> miscdev)
>>
>> -static bool no_msi;
>> -module_param(no_msi, bool, 0444);
>> -MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in
>> pci_endpoint_test");
>> +static int irq_type = IRQ_TYPE_MSIX;
>> +module_param(irq_type, int, 0444);
>> +MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test
>> (0
>> +- Legacy, 1 - MSI, 2 - MSI-X)");
>>
>> enum pci_barno {
>> BAR_0,
>> @@ -103,7 +108,7 @@ struct pci_endpoint_test { struct
>> pci_endpoint_test_data {
>> enum pci_barno test_reg_bar;
>> size_t alignment;
>> - bool no_msi;
>> + int irq_type;
>> };
>>
>> static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
>> @@ -177,10 +182,10 @@ static bool pci_endpoint_test_bar(struct
>> pci_endpoint_test *test,
>>
>> static bool pci_endpoint_test_legacy_irq(struct pci_endpoint_test *test) {
>> - u32 val;
>> + u32 val = COMMAND_RAISE_LEGACY_IRQ;
>>
>> - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
>> - COMMAND_RAISE_LEGACY_IRQ);
>> + val |= (IRQ_TYPE_LEGACY << IRQ_TYPE_SHIFT);
>> + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, val);
>> val = wait_for_completion_timeout(&test->irq_raised,
>> msecs_to_jiffies(1000));
>> if (!val)
>> @@ -192,12 +197,12 @@ static bool pci_endpoint_test_legacy_irq(struct
>> pci_endpoint_test *test) static bool pci_endpoint_test_msi_irq(struct
>> pci_endpoint_test *test,
>> u8 msi_num)
>> {
>> - u32 val;
>> + u32 val = COMMAND_RAISE_MSI_IRQ;
>> struct pci_dev *pdev = test->pdev;
>>
>> - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
>> - msi_num << MSI_NUMBER_SHIFT |
>> - COMMAND_RAISE_MSI_IRQ);
>> + val |= (msi_num << MSI_NUMBER_SHIFT);
>> + val |= (IRQ_TYPE_MSI << IRQ_TYPE_SHIFT);
>> + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, val);
>> val = wait_for_completion_timeout(&test->irq_raised,
>> msecs_to_jiffies(1000));
>> if (!val)
>> @@ -209,6 +214,26 @@ static bool pci_endpoint_test_msi_irq(struct
>> pci_endpoint_test *test,
>> return false;
>> }
>>
>> +static bool pci_endpoint_test_msix_irq(struct pci_endpoint_test *test,
>> + u16 msix_num)
>> +{
>> + u32 val = COMMAND_RAISE_MSIX_IRQ;
>> + struct pci_dev *pdev = test->pdev;
>> +
>> + val |= (msix_num << MSI_NUMBER_SHIFT);
>> + val |= (IRQ_TYPE_MSIX << IRQ_TYPE_SHIFT);
>> + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, val);
>> + val = wait_for_completion_timeout(&test->irq_raised,
>> + msecs_to_jiffies(1000));
>> + if (!val)
>> + return false;
>> +
>> + if (test->last_irq - pdev->irq == msix_num - 1)
>> + return true;
> I think we should use pci_irq_vector() to convert from device vector to Linux IRQ.
> It can be done in pci_endpoint_test_irqhandler()
> (With MSI, pdev->irq will be updated during MSI init, but it is not for MSI-X.)
>
> pci_irq_vector() should also be used for devm_request_irq() and devm_free_irq()
> so some changes required in probe and remove.

We could try it, sounds good.
Let's see if Kishon also agrees.

>
> Regards,
> Alan
>

Regards,
Gustavo

\
 
 \ /
  Last update: 2018-04-24 13:14    [W:0.084 / U:1.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site