lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] ARM64: allwinner: Add support for Libre Computer Board ALL-H3-CC H5 ver.
Date
The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry
Pi B+ form factor single board computer based on the Allwinner H2+, H3, or H5
SoCs with the same PCB.
The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes
and connectors are in the exact same position as on the Raspberry Pi B+.

This patchset enables the H5 variant by moving the H3 board definition to a
common dtsi then include this common dtsi in the H5 dts variant then declares
the correct compatible and model of the H5 variant.

Neil Armstrong (2):
ARM: dts: sun8i-h3-libretech-all-h3-cc: Move board definition to
common dtsi
ARM64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC
H5 ver.

arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 209 +-------------------
arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi | 211 +++++++++++++++++++++
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun50i-h5-libretech-all-h3-cc.dts | 14 ++
4 files changed, 228 insertions(+), 207 deletions(-)
create mode 100644 arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts

--
2.7.4

\
 
 \ /
  Last update: 2018-04-24 11:21    [W:0.176 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site