lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH net-next 5/8] net: mscc: Add initial Ocelot switch support
    I realise now that I didn't reply to this comment:

    On 30/03/2018 16:50:08+0200, Andrew Lunn wrote:
    > > The fact is that ocelot doesn't have separate controls. The port is
    > > either forwarding or not. If it is not forwarding, then there is nothing
    > > to tell the HW to do.
    >
    > Think about the following sequence:
    >
    > ip link set lan0 up
    >
    > After this command, i expect to see packets on lan0 arrive at the
    > host, tcpdump to work, etc. This probably means the port is in
    > 'forwarding' mode, or for B53, STP is disabled.
    >

    On Ocelot, forwarding packets to the host (i.e. forwarding frames
    received on the port to the cpu port) is separate from bridging ports
    together. So after that command, the host can receive packets on lan0.


    --
    Alexandre Belloni, Bootlin (formerly Free Electrons)
    Embedded Linux and Kernel engineering
    https://bootlin.com

    \
     
     \ /
      Last update: 2018-04-24 20:53    [W:2.722 / U:0.104 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site