lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC 2/2] iommu/arm-smmu-v3: Support software retention for pm_resume
From
Date
On 23/04/18 12:45, Yisheng Xie wrote:
> When system suspend, hisilicon's smmu will do power gating for smmu,
> this time smmu's reg will be set to default value for not having
> hardware retention, which means need software do the retention instead.
>
> The patch is to use arm_smmu_device_reset() to restore the register of
> smmu. However, it need to save the msis setting at probe if smmu do not
> support hardware retention.
>
> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
> ---
> drivers/iommu/arm-smmu-v3.c | 69 +++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 66 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index 044df6e..6cb56d8 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -534,6 +534,11 @@ struct arm_smmu_strtab_cfg {
> u32 strtab_base_cfg;
> };
>
> +struct arm_smmu_msi_val {
> + u64 doorbell;
> + u32 data;
> +};

What does this do that struct msi_msg doesn't already (apart from take
up more space in an array)?

> +
> /* An SMMUv3 instance */
> struct arm_smmu_device {
> struct device *dev;
> @@ -558,6 +563,7 @@ struct arm_smmu_device {
>
> #define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0)
> #define ARM_SMMU_OPT_PAGE0_REGS_ONLY (1 << 1)
> +#define ARM_SMMU_OPT_SW_RETENTION (1 << 2)
> u32 options;
>
> struct arm_smmu_cmdq cmdq;
> @@ -587,6 +593,8 @@ struct arm_smmu_device {
>
> u32 sync_count;
>
> + struct arm_smmu_msi_val *msi;
> + bool probed;

This looks really hacky. I'm sure there's probably enough driver model
information to be able to identify the probe state from just the struct
device, but that's still not the right way to go. If you need to know
this, then it can only mean we've got one-time software state
initialisation mixed in with the actual hardware reset which programs
the software state into the device. Thus there should be some
refactoring to properly separate those concerns.

> bool bypass;
>
> /* IOMMU core code handle */
> @@ -630,6 +638,7 @@ struct arm_smmu_option_prop {
> static struct arm_smmu_option_prop arm_smmu_options[] = {
> { ARM_SMMU_OPT_SKIP_PREFETCH, "hisilicon,broken-prefetch-cmd" },
> { ARM_SMMU_OPT_PAGE0_REGS_ONLY, "cavium,cn9900-broken-page1-regspace"},
> + { ARM_SMMU_OPT_SW_RETENTION, "hisilicon,broken-hardware-retention" },

That seems a bit over-specific - there are going to be any number of
SMMU implementations/integrations which may or may not implement
hardware retention states. More crucially, it's also backwards. Making
the driver assume that *every* SMMU implements hardware retention unless
this new DT property is present is quite obviously completely wrong,
especially for ACPI...

The sensible thing to do is to implement suspend/resume support which
works in general, *then* consider optimising it for cases where
explicitly restoring the hardware state may be skipped (if indeed it
makes a significant difference). Are there not already generic DT/ACPI
properties for describing the retention levels of different power
states, which could be made use of here?

> { 0, NULL},
> };
>
> @@ -2228,7 +2237,8 @@ static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
> phys_addr_t doorbell;
> struct device *dev = msi_desc_to_dev(desc);
> struct arm_smmu_device *smmu = dev_get_drvdata(dev);
> - phys_addr_t *cfg = arm_smmu_msi_cfg[desc->platform.msi_index];
> + int msi_index = desc->platform.msi_index;
> + phys_addr_t *cfg = arm_smmu_msi_cfg[msi_index];
>
> doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
> doorbell &= MSI_CFG0_ADDR_MASK;
> @@ -2236,6 +2246,28 @@ static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
> writeq_relaxed(doorbell, smmu->base + cfg[0]);
> writel_relaxed(msg->data, smmu->base + cfg[1]);
> writel_relaxed(ARM_SMMU_MEMATTR_DEVICE_nGnRE, smmu->base + cfg[2]);
> +
> + if (smmu->options & ARM_SMMU_OPT_SW_RETENTION) {

The overhead of writing an extra 12 bytes per MSI to memory is entirely
negligible; saving the message data just doesn't warrant the complexity
of being conditional. In fact, given the need to untangle the IRQ
requests from the hardware reset, I'd rather expect to end up *only*
saving the message here, and writing the IRQ_CFG registers later along
with everything else.

> + smmu->msi[msi_index].doorbell = doorbell;
> + smmu->msi[msi_index].data = msg->data;
> + }
> +}
> +
> +static void arm_smmu_restore_msis(struct arm_smmu_device *smmu)
> +{
> + int nevc = ARM_SMMU_MAX_MSIS - 1;
> +
> + if (!(smmu->features & ARM_SMMU_FEAT_PRI))
> + nevc--;
> +
> + for (; nevc >= 0; nevc--) {
> + phys_addr_t *cfg = arm_smmu_msi_cfg[nevc];
> + struct arm_smmu_msi_val msi_val = smmu->msi[nevc];
> +
> + writeq_relaxed(msi_val.doorbell, smmu->base + cfg[0]);
> + writel_relaxed(msi_val.data, smmu->base + cfg[1]);
> + writel_relaxed(ARM_SMMU_MEMATTR_DEVICE_nGnRE, smmu->base + cfg[2]);
> + }
> }
>
> static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
> @@ -2261,6 +2293,16 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
> return;
> }
>
> + if (smmu->probed) {
> + BUG_ON(!(smmu->options & ARM_SMMU_OPT_SW_RETENTION));
> + arm_smmu_restore_msis(smmu);
> + return;
> + } else if (smmu->options & ARM_SMMU_OPT_SW_RETENTION) {
> + smmu->msi = devm_kmalloc_array(dev, nvec,
> + sizeof(*(smmu->msi)),
> + GFP_KERNEL);
> + }

A single code path which either allocates an empty array *or* writes the
contents of that array to hardware is a clear "you're doing it wrong"
indicator. Yes, this definitely wants refactoring.

> +
> /* Allocate MSIs for evtq, gerror and priq. Ignore cmdq */
> ret = platform_msi_domain_alloc_irqs(dev, nvec, arm_smmu_write_msi_msg);
> if (ret) {
> @@ -2294,6 +2336,9 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
>
> arm_smmu_setup_msis(smmu);
>
> + if (smmu->probed)
> + return;
> +
> /* Request interrupt lines */
> irq = smmu->evtq.q.irq;
> if (irq) {
> @@ -2348,7 +2393,7 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
> }
>
> irq = smmu->combined_irq;
> - if (irq) {
> + if (irq && !smmu->probed) {
> /*
> * Cavium ThunderX2 implementation doesn't not support unique
> * irq lines. Use single irq line for all the SMMUv3 interrupts.
> @@ -2360,7 +2405,7 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
> "arm-smmu-v3-combined-irq", smmu);
> if (ret < 0)
> dev_warn(smmu->dev, "failed to enable combined irq\n");
> - } else
> + } else if (!irq)
> arm_smmu_setup_unique_irqs(smmu);
>
> if (smmu->features & ARM_SMMU_FEAT_PRI)
> @@ -2882,6 +2927,9 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
> if (ret)
> return ret;
> }
> +
> + smmu->probed = true;
> +
> return 0;
> }
>
> @@ -2899,6 +2947,20 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
> arm_smmu_device_remove(pdev);
> }
>
> +static int arm_smmu_pm_resume(struct device *dev)
> +{
> + struct arm_smmu_device *smmu = dev_get_drvdata(dev);
> +
> + if (smmu->options & ARM_SMMU_OPT_SW_RETENTION)
> + return arm_smmu_device_reset(smmu);

Given the SYSTEM_SLEEP_PM_OPS below, does your hardware really preserve
state across hibernate/restore as well? That would be particularly
impressive ;)

Robin.

> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops arm_smmu_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(NULL, arm_smmu_pm_resume)
> +};
> +
> static const struct of_device_id arm_smmu_of_match[] = {
> { .compatible = "arm,smmu-v3", },
> { },
> @@ -2909,6 +2971,7 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
> .driver = {
> .name = "arm-smmu-v3",
> .of_match_table = of_match_ptr(arm_smmu_of_match),
> + .pm = &arm_smmu_pm_ops,
> },
> .probe = arm_smmu_device_probe,
> .remove = arm_smmu_device_remove,
>

\
 
 \ /
  Last update: 2018-04-23 18:15    [W:0.069 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site