lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] drm/panel: otm8009a: use new backlight api
Date
Use the new backlight api.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 26 ++++++++----------------
1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 4c638b7b9943..c2a71bd17e08 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -260,11 +260,7 @@ static int otm8009a_disable(struct drm_panel *panel)
if (!ctx->enabled)
return 0; /* This is not an issue so we return 0 here */

- /* Power off the backlight. Note: end-user still controls brightness */
- ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
- ret = backlight_update_status(ctx->bl_dev);
- if (ret)
- return ret;
+ backlight_disable(ctx->bl_dev);

ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret)
@@ -338,12 +334,7 @@ static int otm8009a_enable(struct drm_panel *panel)
if (ctx->enabled)
return 0;

- /*
- * Power on the backlight. Note: end-user still controls brightness
- * Note: ctx->prepared must be true before updating the backlight.
- */
- ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(ctx->bl_dev);
+ backlight_enable(ctx->bl_dev);

ctx->enabled = true;

@@ -459,11 +450,14 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
ctx->panel.dev = dev;
ctx->panel.funcs = &otm8009a_drm_funcs;

- ctx->bl_dev = backlight_device_register(dev_name(dev), dev, ctx,
- &otm8009a_backlight_ops, NULL);
+ ctx->bl_dev = devm_backlight_device_register(dev, dev_name(dev),
+ dsi->host->dev, ctx,
+ &otm8009a_backlight_ops,
+ NULL);
if (IS_ERR(ctx->bl_dev)) {
- dev_err(dev, "failed to register backlight device\n");
- return PTR_ERR(ctx->bl_dev);
+ ret = PTR_ERR(ctx->bl_dev);
+ dev_err(dev, "failed to register backlight %d\n", ret);
+ return ret;
}

ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
@@ -491,8 +485,6 @@ static int otm8009a_remove(struct mipi_dsi_device *dsi)
mipi_dsi_detach(dsi);
drm_panel_remove(&ctx->panel);

- backlight_device_unregister(ctx->bl_dev);
-
return 0;
}

--
2.15.1
\
 
 \ /
  Last update: 2018-04-23 16:12    [W:0.066 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site