lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ACPI / button: make module loadable when booted in non-ACPI mode
Date
On Monday, April 23, 2018 10:28:34 AM CEST Ard Biesheuvel wrote:
> Modules such as nouveau.ko and i915.ko have a link time dependency on
> acpi_lid_open(), and due to its use of acpi_bus_register_driver(),
> the button.ko module that provides it is only loadable when booted in
> ACPI mode. However, the ACPI button driver can be built into the core
> kernel as well, in which case the dependency can always be satisfied,
> and the dependent modules can be loaded regardless of whether the
> system was booted in ACPI mode or not.
>
> So let's fix this asymmetry by making the ACPI button driver loadable
> as a module even if not booted in ACPI mode, so it can provide the
> acpi_lid_open() symbol in the same way as when built into the kernel.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> Could we perhaps get this into -stable as well? It is not a classic
> regression, but it completely breaks, e.g., Fedora when booting in
> DT mode on an ARM system.
>
> drivers/acpi/button.c | 23 +++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index e1eee7a60fad..0506ca56c615 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -635,4 +635,25 @@ module_param_call(lid_init_state,
> NULL, 0644);
> MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
>
> -module_acpi_driver(acpi_button_driver);
> +/*
> + * Modules such as nouveau.ko and i915.ko have a link time dependency on
> + * acpi_lid_open(), and would therefore not be loadable on ACPI capable kernels
> + * booted in non-ACPI mode if we use the ordinary acpi_bus_[un]register_driver
> + * routines here (which only work when booted in ACPI mode) and build this
> + * driver as a module. So provide our own versions instead.
> + */
> +static int __acpi_bus_register_driver(struct acpi_driver *driver)
> +{
> + if (!acpi_disabled)
> + return acpi_bus_register_driver(driver);
> + return 0;
> +}

I would write this as:

if (acpi_disabled)
return 0;

return acpi_bus_register_driver(driver);

and the comment can go above the (acpi_disabled) check then (bacause that's
what makes the difference when ACPI is disabled).

> +
> +static void __acpi_bus_unregister_driver(struct acpi_driver *driver)
> +{
> + if (!acpi_disabled)
> + acpi_bus_unregister_driver(driver);
> +}
> +
> +module_driver(acpi_button_driver, __acpi_bus_register_driver,
> + __acpi_bus_unregister_driver);
>

\
 
 \ /
  Last update: 2018-04-23 11:12    [W:0.027 / U:1.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site