lkml.org 
[lkml]   [2018]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/18 v2] regulator: tps65090: Pass descriptor instead of GPIO number
Date
Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node for the
regulator.

This regulator supports passing platform data, but enable/sleep
regulators are looked up from the device tree exclusively, so
we can need not touch other files.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Rebase the patch on the other changes.
- Collect Lee's ACK.
---
drivers/regulator/tps65090-regulator.c | 50 ++++++++++++++++------------------
include/linux/mfd/tps65090.h | 8 ++++--
2 files changed, 28 insertions(+), 30 deletions(-)

diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 395f35dc8cdb..2d398fa3b720 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -19,8 +19,8 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -300,26 +300,6 @@ static int tps65090_regulator_disable_ext_control(
return tps65090_config_ext_control(ri, false);
}

-static void tps65090_configure_regulator_config(
- struct tps65090_regulator_plat_data *tps_pdata,
- struct regulator_config *config)
-{
- if (gpio_is_valid(tps_pdata->gpio)) {
- int gpio_flag = GPIOF_OUT_INIT_LOW;
-
- if (tps_pdata->reg_init_data->constraints.always_on ||
- tps_pdata->reg_init_data->constraints.boot_on)
- gpio_flag = GPIOF_OUT_INIT_HIGH;
-
- config->ena_gpio = tps_pdata->gpio;
- config->ena_gpio_initialized = true;
- config->ena_gpio_flags = gpio_flag;
- } else {
- config->ena_gpio = -EINVAL;
- config->ena_gpio_initialized = false;
- }
-}
-
#ifdef CONFIG_OF
static struct of_regulator_match tps65090_matches[] = {
{ .name = "dcdc1", },
@@ -385,9 +365,26 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
rpdata->enable_ext_control = of_property_read_bool(
tps65090_matches[idx].of_node,
"ti,enable-ext-control");
- if (rpdata->enable_ext_control)
- rpdata->gpio = of_get_named_gpio(np,
- "dcdc-ext-control-gpios", 0);
+ if (rpdata->enable_ext_control) {
+ enum gpiod_flags gflags;
+
+ if (ri_data->constraints.always_on ||
+ ri_data->constraints.boot_on)
+ gflags = GPIOD_OUT_HIGH;
+ else
+ gflags = GPIOD_OUT_LOW;
+
+ rpdata->gpiod = devm_gpiod_get_from_of_node(&pdev->dev,
+ tps65090_matches[idx].of_node,
+ "dcdc-ext-control-gpios", 0,
+ gflags,
+ "tps65090");
+ if (IS_ERR(rpdata->gpiod))
+ return ERR_CAST(rpdata->gpiod);
+ if (!rpdata->gpiod)
+ dev_err(&pdev->dev,
+ "could not find DCDC external control GPIO\n");
+ }

if (of_property_read_u32(tps65090_matches[idx].of_node,
"ti,overcurrent-wait",
@@ -455,8 +452,7 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
*/
if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
if (tps_pdata->enable_ext_control) {
- tps65090_configure_regulator_config(
- tps_pdata, &config);
+ config.ena_gpiod = tps_pdata->gpiod;
ri->desc->ops = &tps65090_ext_control_ops;
} else {
ret = tps65090_regulator_disable_ext_control(
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 67d144b3b8f9..f05bf4a146e2 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -83,6 +83,8 @@ enum {
#define TPS65090_MAX_REG TPS65090_REG_AD_OUT2
#define TPS65090_NUM_REGS (TPS65090_MAX_REG + 1)

+struct gpio_desc;
+
struct tps65090 {
struct device *dev;
struct regmap *rmap;
@@ -95,8 +97,8 @@ struct tps65090 {
* @reg_init_data: The regulator init data.
* @enable_ext_control: Enable extrenal control or not. Only available for
* DCDC1, DCDC2 and DCDC3.
- * @gpio: Gpio number if external control is enabled and controlled through
- * gpio.
+ * @gpiod: Gpio descriptor if external control is enabled and controlled through
+ * gpio
* @overcurrent_wait_valid: True if the overcurrent_wait should be applied.
* @overcurrent_wait: Value to set as the overcurrent wait time. This is the
* actual bitfield value, not a time in ms (valid value are 0 - 3).
@@ -104,7 +106,7 @@ struct tps65090 {
struct tps65090_regulator_plat_data {
struct regulator_init_data *reg_init_data;
bool enable_ext_control;
- int gpio;
+ struct gpio_desc *gpiod;
bool overcurrent_wait_valid;
int overcurrent_wait;
};
--
2.14.3
\
 
 \ /
  Last update: 2018-04-23 01:12    [W:0.167 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site