lkml.org 
[lkml]   [2018]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 10/15] ata: pata_pxa: remove the dmaengine compat need
Date
Robert Jarzmik <robert.jarzmik@free.fr> writes:

> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
>
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Bartlomiej, could I have your ack please ?

Cheers.

--
Robert

PS: The submitted patch
> ---
> drivers/ata/pata_pxa.c | 10 +---------
> 1 file changed, 1 insertion(+), 9 deletions(-)
>
> diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
> index f6c46e9a4dc0..e8b6a2e464c9 100644
> --- a/drivers/ata/pata_pxa.c
> +++ b/drivers/ata/pata_pxa.c
> @@ -25,7 +25,6 @@
> #include <linux/libata.h>
> #include <linux/platform_device.h>
> #include <linux/dmaengine.h>
> -#include <linux/dma/pxa-dma.h>
> #include <linux/gpio.h>
> #include <linux/slab.h>
> #include <linux/completion.h>
> @@ -180,8 +179,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
> struct resource *irq_res;
> struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
> struct dma_slave_config config;
> - dma_cap_mask_t mask;
> - struct pxad_param param;
> int ret = 0;
>
> /*
> @@ -278,10 +275,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
>
> ap->private_data = data;
>
> - dma_cap_zero(mask);
> - dma_cap_set(DMA_SLAVE, mask);
> - param.prio = PXAD_PRIO_LOWEST;
> - param.drcmr = pdata->dma_dreq;
> memset(&config, 0, sizeof(config));
> config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> @@ -294,8 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
> * Request the DMA channel
> */
> data->dma_chan =
> - dma_request_slave_channel_compat(mask, pxad_filter_fn,
> - &param, &pdev->dev, "data");
> + dma_request_slave_channel(&pdev->dev, "data");
> if (!data->dma_chan)
> return -EBUSY;
> ret = dmaengine_slave_config(data->dma_chan, &config);

\
 
 \ /
  Last update: 2018-04-21 21:33    [W:0.331 / U:1.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site