Messages in this thread | | | From | Loic Poulain <> | Date | Fri, 20 Apr 2018 09:37:57 +0200 | Subject | Re: [PATCH v2] ARM: dts: qcom: Add apq8064 Dragon Board 600c support |
| |
Hi Srini,
On 16 March 2018 at 22:54, <srinivas.kandagatla@linaro.org> wrote: > From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > > This patch add support to DB600c board, which is another > 96boards based on Qualcomm APQ8064 SoC. > > Support for USB, HDMI, PCIe, I2C, SPI, eMMC, microSD card, LEDs > device tree nodes is added in this patch. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > Changes since v1: > - added chosen node with stdout, suggested by Stephen Boyd > - removed spi flash node and gpio22 pinconf, as its not required in this patch. > - removed extra comment lines and fix a node name, spotted by Stephen Boyd. > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-apq8064-db600c.dts | 530 ++++++++++++++++++++++++++++++ > 2 files changed, 531 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-apq8064-db600c.dts
> + > + gsbi@16500000 { > + status = "okay"; > + qcom,mode = <GSBI_PROT_UART_W_FC>; > + serial@1654000 {
Missing zero, should be serial@16540000.
> + label = "BT-UART"; > + status = "okay"; > + pinctrl-name = "default"; > + pinctrl-0 = <&gsbi6_uart_4pins>; > + }; > + };
Regards, Loic
| |