lkml.org 
[lkml]   [2018]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/7] drm/i2c: tda998x: register as a drm bridge
On Fri, Apr 20, 2018 at 01:06:49PM +0300, Laurent Pinchart wrote:
> Hi Peter,
>
> Thank you for the patch.
>
> On Thursday, 19 April 2018 19:27:51 EEST Peter Rosin wrote:
> > This makes this driver work with all(?) drivers that are not
> > componentized and instead expect to connect to a panel/bridge. That
> > said, the only one tested is atmel_hlcdc.
> >
> > This hooks the relevant work function previously called by the encoder
> > and the component also to the bridge, since the encoder goes away when
> > connecting to the bridge interface of the driver and the equivalent of
> > bind/unbind of the component is handled by bridge attach/detach.
> >
> > The lifetime requirements of a bridge and a component are slightly
> > different, which is the reason for struct tda998x_bridge.
>
> Couldn't you move the allocation and initialization (tda998x_create) of the
> tda998x_priv structure to probe time ? I think you wouldn't need a separate
> structure in that case. Unless I'm mistaken there would be an added benefit of
> separating component and bridge initialization, resulting in the encoder not
> being initialized at all if the component isn't used. You wouldn't need to add
> a local_encoder parameter to the tda998x_init() function.

No, I don't like that idea one bit, as I've stated in the past about the
component API. The same (probably) goes for the bridge stuff too.

Consider the following:

Your DRM system is initialised. You then remove a module, which results
in the DRM system being torn down. You re-insert the module (eg, having
made a change to it). The DRM system is then re-initialised.

At this point, what is the state of variables such as priv->is_on if
you allocate the structure at probe time?

What about all the other variables in the driver private structure - are
you sure that the driver can cope with random values from the previous
"usage" remaining there?

At the moment, this isn't a concern for the driver because we
dev_kzalloc() the structure in the bind callback. Move that to the
probe function, and the structure is no longer re-initialised each
time, and so it retains the previous state. The driver is not setup
to cope with that.

So, to work around that, you would need to reinitialise _everything_
in the structure that the driver requires, which IMHO is a very
open to bugs (eg, if a member is missed, or added without the
necessary re-initialisation), _especially_ when this is not a path
that will get regular testing.

If you want to do this for a subset of data, it would be much better
to separate them into independent structures (maybe one embedded into
the other) so that this problem can not occur. That way, a subset
of the data can be memset() when bound to the rest of the DRM system
ensuring a consistent driver state and still achieve what you're
suggesting.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

\
 
 \ /
  Last update: 2018-04-20 12:25    [W:0.108 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site