lkml.org 
[lkml]   [2018]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/8] bindings: PCI: designware: Add support for the EP in designware driver
From
Date


On Wednesday 28 March 2018 05:08 PM, Gustavo Pimentel wrote:
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

Please add a commit message.
> ---
> Documentation/devicetree/bindings/pci/designware-pcie.txt | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> index 6300762..4bb2e08 100644
> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> @@ -3,6 +3,7 @@
> Required properties:
> - compatible:
> "snps,dw-pcie" for RC mode;
> + "snps,dw-pcie-ep" for EP mode;
> - reg: Should contain the configuration address space.
> - reg-names: Must be "config" for the PCIe configuration space.
> (The old way of getting the configuration address space from "ranges"
> @@ -56,3 +57,15 @@ Example configuration:
> #interrupt-cells = <1>;
> num-lanes = <1>;
> };
> +or
> + pcie_ep: pcie_ep@dfc00000 {
> + compatible = "snps,dw-pcie-ep";
> + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
> + <0xdfc01000 0x0001000>, /* IP registers 2 */

Doesn't this have iATU unroll space?

Thanks
Kishon

\
 
 \ /
  Last update: 2018-04-02 07:36    [W:0.158 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site