lkml.org 
[lkml]   [2018]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] net: phy: marvell: clear wol event before setting it
From: Jingju Hou <Jingju.Hou@synaptics.com>

If WOL event happened once, the LED[2] interrupt pin will not be
cleared unless reading the CSISR register. So clear the WOL event
before enabling it.

Signed-off-by: Jingju Hou <Jingju.Hou@synaptics.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
drivers/net/phy/marvell.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index c22e8e383247..b6abe1cbc84b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -115,6 +115,9 @@
/* WOL Event Interrupt Enable */
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)

+/* Copper Specific Interrupt Status Register */
+#define MII_88E1318S_PHY_CSISR 0x13
+
/* LED Timer Control Register */
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
@@ -1393,6 +1396,12 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
goto error;

+ /* If WOL event happened once, the LED[2] interrupt pin
+ * will not be cleared unless reading the CSISR register.
+ * So clear the WOL event first before enabling it.
+ */
+ phy_read(phydev, MII_88E1318S_PHY_CSISR);
+
/* Enable the WOL interrupt */
err = __phy_modify(phydev, MII_88E1318S_PHY_CSIER, 0,
MII_88E1318S_PHY_CSIER_WOL_EIE);
--
2.17.0
\
 
 \ /
  Last update: 2018-04-19 10:03    [W:0.184 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site