lkml.org 
[lkml]   [2018]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] dmaengine: sprd: Define the DMA transfer step type
Date
From: Eric Long <eric.long@spreadtrum.com>

Define the DMA transfer step type to make code more readable.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes since v1:
- Convert enum structure to macros definition for DMA step type.
---
drivers/dma/sprd-dma.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index b106e8a..dcfa417 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -116,6 +116,13 @@
#define SPRD_DMA_SRC_TRSF_STEP_OFFSET 0
#define SPRD_DMA_TRSF_STEP_MASK GENMASK(15, 0)

+/* define the DMA transfer step type */
+#define SPRD_DMA_NONE_STEP 0
+#define SPRD_DMA_BYTE_STEP 1
+#define SPRD_DMA_SHORT_STEP 2
+#define SPRD_DMA_WORD_STEP 4
+#define SPRD_DMA_DWORD_STEP 8
+
#define SPRD_DMA_SOFTWARE_UID 0

/*
@@ -598,16 +605,16 @@ static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,

if (IS_ALIGNED(len, 4)) {
datawidth = 2;
- src_step = 4;
- des_step = 4;
+ src_step = SPRD_DMA_WORD_STEP;
+ des_step = SPRD_DMA_WORD_STEP;
} else if (IS_ALIGNED(len, 2)) {
datawidth = 1;
- src_step = 2;
- des_step = 2;
+ src_step = SPRD_DMA_SHORT_STEP;
+ des_step = SPRD_DMA_SHORT_STEP;
} else {
datawidth = 0;
- src_step = 1;
- des_step = 1;
+ src_step = SPRD_DMA_BYTE_STEP;
+ des_step = SPRD_DMA_BYTE_STEP;
}

fragment_len = SPRD_DMA_MEMCPY_MIN_SIZE;
--
1.7.9.5
\
 
 \ /
  Last update: 2018-04-19 04:02    [W:0.074 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site