[lkml]   [2018]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/3] lan78xx: Read configuration from Device Tree
The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.

This patch set adds support for reading the MAC address and LED modes from
Device Tree.

- Use eth_platform_get_mac_address.
- Support up to 4 LEDs, and move LED mode constants into dt-bindings header.
- Improve bindings document.
- Remove EEE support.

Phil Elwell (3):
lan78xx: Read MAC address from DT if present
lan78xx: Read LED states from Device Tree
dt-bindings: Document the DT bindings for lan78xx

.../devicetree/bindings/net/microchip,lan78xx.txt | 43 +++++++++++++++
drivers/net/usb/lan78xx.c | 62 ++++++++++++++--------
include/dt-bindings/net/microchip-78xx.h | 40 ++++++++++++++
4 files changed, 125 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt
create mode 100644 include/dt-bindings/net/microchip-78xx.h


 \ /
  Last update: 2018-04-18 17:47    [W:0.032 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site