lkml.org 
[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: linux-next on x60: network manager often complains "network is disabled" after resume
From
Date
On Sun, 2018-04-15 at 18:16 +0200, Pavel Machek wrote:
> On Mon 2018-03-26 10:33:55, Dan Williams wrote:
> > On Sun, 2018-03-25 at 08:19 +0200, Pavel Machek wrote:
> > > > > > Ok, what does 'nmcli dev' and 'nmcli radio' show?
> > > > >
> > > > > Broken state.
> > > > >
> > > > > pavel@amd:~$ nmcli dev
> > > > > DEVICE TYPE STATE CONNECTION
> > > > > eth1 ethernet unavailable --
> > > > > lo loopback unmanaged --
> > > > > wlan0 wifi unmanaged --
> > > >
> > > > If the state is "unmanaged" on resume, that would indicate a
> > > > problem
> > > > with sleep/wake and likely not a kernel network device issue.
> > > >
> > > > We should probably move this discussion to the NM lists to
> > > > debug
> > > > further. Before you suspend, run "nmcli gen log level trace"
> > > > to
> > > > turn
> > > > on full debug logging, then reproduce the issue, and send a
> > > > pointer
> > > > to
> > > > those logs (scrubbed for anything you consider sensitive) to
> > > > the NM
> > > > mailing list.
> > >
> > > Hmm :-)
> > >
> > > root@amd:/data/pavel# nmcli gen log level trace
> > > Error: Unknown log level 'trace'
> >
> > What NM version? 'trace' is pretty old (since 1.0 from December
> > 2014)
> > so unless you're using a really, really old version of Debian I'd
> > expect you'd have it. Anyway, debug would do.
>
> Hmm.
>
> pavel@duo:~$ /usr/sbin/NetworkManager --version
> You must be root to run NetworkManager!
> pavel@duo:~$ sudo /usr/sbin/NetworkManager --version
> 0.9.10.0
>
> So I set the log level, but I still don't see much in the log:
>
> Apr 14 18:14:29 duo dbus[3009]: [system] Successfully activated
> service 'org.freedesktop.nm_dispatcher'
> Apr 14 18:14:29 duo nm-dispatcher: Dispatching action 'down' for
> wlan1
> Apr 14 18:14:29 duo systemd[1]: Started Network Manager Script
> Dispatcher Service.
> Apr 14 18:14:29 duo systemd-sleep[6853]: Suspending system...

I think if systemd really is handling the suspend/resume, you'll need
to make sure NM has systemd suspend/resume handling enabled as well.
NM 0.9.10 has build-time support for both:

[--with-suspend-resume=upower|systemd]

while later versions also support ConsoleKit2 and elogind.

Any idea what your NM was compiled with? Though honestly I'm not sure
how all the suspend/resume stuff is supposed to work these days on
different distros that provide the choice between systemd/upower/pm-
utils/CK2/etc.

Dan

> Apr 14 21:27:53 duo systemd[1]: systemd-journald.service watchdog
> timeout (limit 1min)!
> pavel@duo:~$ date
> Sun Apr 15 12:26:32 CEST 2018
> pavel@duo:~$
>
> Is it possible that time handling accross suspend changed in v4.17?
>
> I get some weird effects. With display backlight...
>
> > > Where do I get the logs? I don't see much in the syslog...
> > > And.. It seems that it is "every other suspend". One resume
> > > results
> > > in
> > > broken network, one in working one, one in broken one...
> >
> > Does your distro use pm-utils, upower, or systemd for
> > suspend/resume
> > handling?
>
> upower, I guess:
>
> pavel@duo:/data/l/linux$ ps aux | grep upower
> root 3820 0.0 0.1 42848 7984 ? Ssl Apr14 0:01
> /usr/lib/upower/upowerd
>
>
> Pavel

\
 
 \ /
  Last update: 2018-04-17 17:04    [W:0.097 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site