lkml.org 
[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v2,2/2] regulator: add QCOM RPMh regulator driver
On Fri, Apr 13, 2018 at 07:50:35PM -0700, David Collins wrote:
> Add the QCOM RPMh regulator driver to manage PMIC regulators
> which are controlled via RPMh on some Qualcomm Technologies, Inc.
> SoCs. RPMh is a hardware block which contains several
> accelerators which are used to manage various hardware resources
> that are shared between the processors of the SoC. The final
> hardware state of a regulator is determined within RPMh by
> performing max aggregation of the requests made by all of the
> processors.
>
> Add support for PMIC regulator control via the voltage regulator
> manager (VRM) and oscillator buffer (XOB) RPMh accelerators. VRM
> supports manipulation of enable state, voltage, mode, and
> headroom voltage. XOB supports manipulation of enable state.
>
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> ---
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/qcom_rpmh-regulator.c | 910 ++++++++++++++++++++++++++++++++
> 3 files changed, 920 insertions(+)
> create mode 100644 drivers/regulator/qcom_rpmh-regulator.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 097f617..e0ecd0a 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -671,6 +671,15 @@ config REGULATOR_QCOM_RPM
> Qualcomm RPM as a module. The module will be named
> "qcom_rpm-regulator".
>
> +config REGULATOR_QCOM_RPMH
> + tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
> + depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
> + help
> + This driver supports control of PMIC regulators via the RPMh hardware
> + block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
> + control allows for voting on regulator state between multiple
> + processors within the SoC.
> +
> config REGULATOR_QCOM_SMD_RPM
> tristate "Qualcomm SMD based RPM regulator driver"
> depends on QCOM_SMD_RPM
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 590674f..c2274dd 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -77,6 +77,7 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
> obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
> obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
> +obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom_rpmh-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
> obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
> diff --git a/drivers/regulator/qcom_rpmh-regulator.c b/drivers/regulator/qcom_rpmh-regulator.c
> new file mode 100644
> index 0000000..03b1301
> --- /dev/null
> +++ b/drivers/regulator/qcom_rpmh-regulator.c
> @@ -0,0 +1,910 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
> +
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#include <soc/qcom/cmd-db.h>
> +#include <soc/qcom/rpmh.h>
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +/**
> + * enum rpmh_regulator_type - supported RPMh accelerator types
> + * %VRM: RPMh VRM accelerator which supports voting on enable, voltage,
> + * mode, and headroom voltage of LDO, SMPS, and BOB type PMIC
> + * regulators.
> + * %XOB: RPMh XOB accelerator which supports voting on the enable state
> + * of PMIC regulators.
> + */
> +enum rpmh_regulator_type {
> + VRM,
> + XOB,
> +};
> +
> +#define RPMH_VRM_HEADROOM_MAX_UV 511000
> +
> +#define RPMH_REGULATOR_REG_VRM_VOLTAGE 0x0
> +#define RPMH_REGULATOR_REG_ENABLE 0x4
> +#define RPMH_REGULATOR_REG_VRM_MODE 0x8
> +#define RPMH_REGULATOR_REG_VRM_HEADROOM 0xC
> +
> +#define RPMH_REGULATOR_DISABLE 0x0
> +#define RPMH_REGULATOR_ENABLE 0x1
> +
> +#define RPMH_REGULATOR_MODE_COUNT 4
> +
> +/**
> + * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
> + * @regulator_type: RPMh accelerator type used to manage this
> + * regulator
> + * @ops: Pointer to regulator ops callback structure
> + * @voltage_range: The single range of voltages supported by this
> + * PMIC regulator type
> + * @n_voltages: The number of unique voltage set points defined
> + * by voltage_range
> + * @pmic_mode_map: Array indexed by regulator framework mode
> + * containing PMIC hardware modes. Must be large
> + * enough to index all framework modes supported
> + * by this regulator hardware type.
> + * @of_map_mode: Maps an RPMH_REGULATOR_MODE_* mode value defined
> + * in device tree to a regulator framework mode

The name of the field is a bit misleading, this is a map of RPMh mode
to regulator framework mode, the device tree just happens to be the
place where this mapping is defined.

> + * @bypass_mode: VRM PMIC mode value corresponding to bypass
> + * (pass-through) for this regulator. Only used
> + * by BOB type via VRM.
> + */
> +struct rpmh_vreg_hw_data {
> + enum rpmh_regulator_type regulator_type;
> + const struct regulator_ops *ops;
> + const struct regulator_linear_range voltage_range;
> + int n_voltages;
> + const u32 *pmic_mode_map;
> + unsigned int (*of_map_mode)(unsigned int mode);
> + u32 bypass_mode;
> +};
> +
> +/**
> + * struct rpmh_vreg - individual rpmh regulator data structure encapsulating a
> + * single regulator device
> + * @rpmh_client: Handle used for rpmh communications

nit: RPMh

> + * @addr: Base address of the regulator resource within
> + * an RPMh accelerator
> + * @rdesc: Regulator descriptor
> + * @hw_data: PMIC regulator configuration data for this RPMh
> + * regulator
> + * @regulator_type: RPMh accelerator type for this regulator
> + * resource
> + * @always_wait_for_ack: Boolean flag indicating if a request must always
> + * wait for an ACK from RPMh before continuing even
> + * if it corresponds to a strictly lower power
> + * state (e.g. enabled --> disabled).
> + * @drms_mode: Array of regulator framework modes which can
> + * be configured dynamically for this regulator
> + * via the set_load() callback.
> + * @drms_mode_max_uA: Array of maximum load currents in microamps
> + * supported by the corresponding modes in
> + * drms_mode. Elements must be specified in
> + * strictly increasing order.
> + * @drms_mode_count: The number of elements in drms_mode array.
> + * @enabled: Boolean indicating if the regulator is enabled
> + * or not
> + * @voltage_selector: Selector used for get_voltage_sel() and
> + * set_voltage_sel() callbacks
> + * @mode: RPMh VRM regulator current framework mode
> + * @bypassed: Boolean indicating if the regulator is in
> + * bypass (pass-through) mode or not. This is
> + * only used by BOB rpmh-regulator resources.
> + */
> +struct rpmh_vreg {
> + struct rpmh_client *rpmh_client;
> + u32 addr;
> + struct regulator_desc rdesc;
> + const struct rpmh_vreg_hw_data *hw_data;
> + enum rpmh_regulator_type regulator_type;

This value is already available via rpmh_vreg->hw_data->regulator_type,
why duplicate it? The field is assigned in rpmh_regulator_init_vreg()
and only read once in the same function, there seems to be no need for
it, not even to improve readability.

> + bool always_wait_for_ack;
> + unsigned int *drms_mode;
> + int *drms_mode_max_uA;
> + size_t drms_mode_count;
> +
> + bool enabled;
> + int voltage_selector;
> + unsigned int mode;
> + bool bypassed;
> +};
> +
> +/**
> + * struct rpmh_vreg_init_data - initialization data for an RPMh regulator
> + * @name: Name for the regulator which also corresponds
> + * to the device tree subnode name of the regulator
> + * @resource_name: RPMh regulator resource name format string.
> + * This must include exactly one field: '%s' which
> + * is filled at run-time with the PMIC ID provided
> + * by device tree property qcom,pmic-id. Example:
> + * "ldo%s1" for RPMh resource "ldoa1".
> + * @supply_name: Parent supply regulator name
> + * @hw_data: Configuration data for this PMIC regulator type
> + */
> +struct rpmh_vreg_init_data {
> + const char *name;
> + const char *resource_name;
> + const char *supply_name;
> + const struct rpmh_vreg_hw_data *hw_data;
> +};
> +
> +/**
> + * rpmh_regulator_send_request() - send the request to RPMh
> + * @vreg: Pointer to the RPMh regulator
> + * @cmd: RPMh commands to send
> + * @count: Size of cmd array
> + * @wait_for_ack: Boolean indicating if execution must wait until the
> + * request has been acknowledged as complete
> + *
> + * Return: 0 on success, errno on failure
> + */
> +static int rpmh_regulator_send_request(struct rpmh_vreg *vreg,
> + struct tcs_cmd *cmd, int count, bool wait_for_ack)
> +{
> + int ret;
> +
> + if (wait_for_ack || vreg->always_wait_for_ack)
> + ret = rpmh_write(vreg->rpmh_client,
> + RPMH_ACTIVE_ONLY_STATE, cmd, count);
> + else
> + ret = rpmh_write_async(vreg->rpmh_client,
> + RPMH_ACTIVE_ONLY_STATE, cmd, count);
> +
> + return ret;
> +}
> +
> +static int rpmh_regulator_is_enabled(struct regulator_dev *rdev)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> +
> + return vreg->enabled;
> +}
> +
> +static int rpmh_regulator_enable(struct regulator_dev *rdev)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> + struct tcs_cmd cmd = {
> + .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
> + .data = RPMH_REGULATOR_ENABLE,
> + };
> + int ret;
> +
> + ret = rpmh_regulator_send_request(vreg, &cmd, 1, true);
> +
> + if (!ret)
> + vreg->enabled = true;
> +
> + return ret;
> +}
> +
> +static int rpmh_regulator_disable(struct regulator_dev *rdev)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> + struct tcs_cmd cmd = {
> + .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
> + .data = RPMH_REGULATOR_DISABLE,
> + };
> + int ret;
> +
> + ret = rpmh_regulator_send_request(vreg, &cmd, 1, false);
> +
> + if (!ret)
> + vreg->enabled = false;
> +
> + return ret;
> +}
> +
> +static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
> + unsigned int selector)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> + struct tcs_cmd cmd = {
> + .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE,
> + };
> + int ret;
> +
> + /* VRM voltage control register is set with voltage in millivolts. */
> + cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev,
> + selector), 1000);
> +
> + ret = rpmh_regulator_send_request(vreg, &cmd, 1,
> + selector > vreg->voltage_selector);
> + if (!ret)
> + vreg->voltage_selector = selector;
> +
> + return 0;
> +}
> +
> +static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> +
> + return vreg->voltage_selector;
> +}
> +
> +static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
> + unsigned int mode, bool bypassed)
> +{
> + struct tcs_cmd cmd = {
> + .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE,
> + };
> +
> + cmd.data = bypassed ? vreg->hw_data->bypass_mode
> + : vreg->hw_data->pmic_mode_map[mode];
> +
> + return rpmh_regulator_send_request(vreg, &cmd, 1, true);
> +}
> +
> +static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev,
> + unsigned int mode)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> + int ret;
> +
> + if (mode == vreg->mode)
> + return 0;
> + else if (mode > REGULATOR_MODE_STANDBY)
> + return -EINVAL;
> +
> + ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed);
> + if (!ret)
> + vreg->mode = mode;
> +
> + return ret;
> +}
> +
> +static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> +
> + return vreg->mode;
> +}
> +
> +static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> + int i;
> +
> + for (i = 0; i < vreg->drms_mode_count - 1; i++)
> + if (load_uA < vreg->drms_mode_max_uA[i])

Shouldn't this be '<='?

nit: IMO 'vreg->drms_mode_max_uA[i] >= load_uA' would be more readable.

> + break;
> +
> + return rpmh_regulator_vrm_set_mode(rdev, vreg->drms_mode[i]);
> +}
> +
> +static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev,
> + bool enable)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> + int ret;
> +
> + if (vreg->bypassed == enable)
> + return 0;
> +
> + ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable);
> + if (!ret)
> + vreg->bypassed = enable;
> +
> + return ret;
> +}
> +
> +static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev,
> + bool *enable)
> +{
> + struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
> +
> + *enable = vreg->bypassed;
> +
> + return 0;
> +}
> +
> +static const struct regulator_ops rpmh_regulator_vrm_ops = {
> + .enable = rpmh_regulator_enable,
> + .disable = rpmh_regulator_disable,
> + .is_enabled = rpmh_regulator_is_enabled,
> + .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
> + .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_mode = rpmh_regulator_vrm_set_mode,
> + .get_mode = rpmh_regulator_vrm_get_mode,
> + .set_load = rpmh_regulator_vrm_set_load,
> +};
> +
> +static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = {
> + .enable = rpmh_regulator_enable,
> + .disable = rpmh_regulator_disable,
> + .is_enabled = rpmh_regulator_is_enabled,
> + .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
> + .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_mode = rpmh_regulator_vrm_set_mode,
> + .get_mode = rpmh_regulator_vrm_get_mode,
> + .set_load = rpmh_regulator_vrm_set_load,
> + .set_bypass = rpmh_regulator_vrm_set_bypass,
> + .get_bypass = rpmh_regulator_vrm_get_bypass,
> +};
> +
> +static const struct regulator_ops rpmh_regulator_xob_ops = {
> + .enable = rpmh_regulator_enable,
> + .disable = rpmh_regulator_disable,
> + .is_enabled = rpmh_regulator_is_enabled,
> +};
> +
> +/**
> + * rpmh_regulator_parse_vrm_modes() - parse the supported mode configurations
> + * for a VRM RPMh resource from device tree
> + * vreg: Pointer to the individual rpmh-regulator resource
> + * dev: Pointer to the top level rpmh-regulator PMIC device
> + * node: Pointer to the individual rpmh-regulator resource
> + * device node
> + *
> + * This function initializes the drms_mode[] and drms_mode_max_uA[] arrays of
> + * vreg based upon the values of optional device tree properties.
> + *
> + * Return: 0 on success, errno on failure
> + */
> +static int rpmh_regulator_parse_vrm_modes(struct rpmh_vreg *vreg,
> + struct device *dev, struct device_node *node)
> +{
> + const char *prop;
> + int i, len, ret, mode;
> + u32 *buf;
> +
> + /* qcom,allowed-drms-modes is optional */
> + prop = "qcom,allowed-drms-modes";
> + len = of_property_count_elems_of_size(node, prop, sizeof(u32));
> + if (len < 0)
> + return 0;
> +
> + vreg->drms_mode = devm_kcalloc(dev, len, sizeof(*vreg->drms_mode),
> + GFP_KERNEL);
> + vreg->drms_mode_max_uA = devm_kcalloc(dev, len,
> + sizeof(*vreg->drms_mode_max_uA), GFP_KERNEL);
> + if (!vreg->drms_mode || !vreg->drms_mode_max_uA)
> + return -ENOMEM;
> + vreg->drms_mode_count = len;
> +
> + buf = kcalloc(len, sizeof(*buf), GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32_array(node, prop, buf, len);
> + if (ret < 0) {
> + dev_err(dev, "%s: unable to read %s, ret=%d\n",
> + node->name, prop, ret);
> + goto done;
> + }
> +
> + for (i = 0; i < len; i++) {
> + mode = vreg->hw_data->of_map_mode(buf[i]);
> + if (mode <= 0) {
> + dev_err(dev, "%s: element %d of %s = %u is invalid for this regulator\n",
> + node->name, i, prop, buf[i]);
> + ret = -EINVAL;
> + goto done;
> + }
> +
> + vreg->drms_mode[i] = mode;
> + }
> +
> + prop = "qcom,drms-mode-threshold-currents";
> + len = of_property_count_elems_of_size(node, prop, sizeof(u32));
> + if (len != vreg->drms_mode_count) {
> + dev_err(dev, "%s: invalid element count=%d for %s\n",
> + node->name, len, prop);
> + ret = -EINVAL;
> + goto done;
> + }
> +
> + ret = of_property_read_u32_array(node, prop, buf, len);
> + if (ret < 0) {
> + dev_err(dev, "%s: unable to read %s, ret=%d\n",
> + node->name, prop, ret);
> + goto done;
> + }
> +
> + for (i = 0; i < len; i++) {
> + vreg->drms_mode_max_uA[i] = buf[i];
> +
> + if (i > 0 && vreg->drms_mode_max_uA[i]
> + <= vreg->drms_mode_max_uA[i - 1]) {
> + dev_err(dev, "%s: %s elements are not in ascending order\n",
> + node->name, prop);
> + ret = -EINVAL;
> + goto done;
> + }
> + }
> +
> +done:
> + kfree(buf);
> + return ret;
> +}
> +
> +/**
> + * rpmh_regulator_load_default_parameters() - initialize the RPMh resource
> + * request for this regulator based on optional device tree
> + * properties
> + * vreg: Pointer to the individual rpmh-regulator resource
> + * dev: Pointer to the top level rpmh-regulator PMIC device
> + * node: Pointer to the individual rpmh-regulator resource
> + * device node
> + *
> + * Return: 0 on success, errno on failure
> + */
> +static int rpmh_regulator_load_default_parameters(struct rpmh_vreg *vreg,
> + struct device *dev, struct device_node *node)
> +{
> + struct tcs_cmd cmd[2] = {};
> + const struct regulator_linear_range *range;
> + const char *prop;
> + int cmd_count = 0;
> + int ret, selector;
> + u32 uV;
> +
> + if (vreg->hw_data->regulator_type == VRM) {
> + prop = "qcom,headroom-voltage";
> + ret = of_property_read_u32(node, prop, &uV);
> + if (!ret) {
> + if (uV > RPMH_VRM_HEADROOM_MAX_UV) {
> + dev_err(dev, "%s: %s=%u is invalid\n",
> + node->name, prop, uV);
> + return -EINVAL;
> + }
> +
> + cmd[cmd_count].addr
> + = vreg->addr + RPMH_REGULATOR_REG_VRM_HEADROOM;
> + cmd[cmd_count++].data = DIV_ROUND_UP(uV, 1000);
> + }
> +
> + prop = "qcom,regulator-initial-voltage";
> + ret = of_property_read_u32(node, prop, &uV);
> + if (!ret) {
> + range = &vreg->hw_data->voltage_range;
> + selector = DIV_ROUND_UP(uV - range->min_uV,
> + range->uV_step) + range->min_sel;
> + if (uV < range->min_uV || selector > range->max_sel) {
> + dev_err(dev, "%s: %s=%u is invalid\n",
> + node->name, prop, uV);
> + return -EINVAL;
> + }
> +
> + vreg->voltage_selector = selector;
> +
> + cmd[cmd_count].addr
> + = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE;
> + cmd[cmd_count++].data
> + = DIV_ROUND_UP(selector * range->uV_step
> + + range->min_uV, 1000);
> + }
> + }
> +
> + if (cmd_count) {
> + ret = rpmh_regulator_send_request(vreg, cmd, cmd_count, true);
> + if (ret < 0) {
> + dev_err(dev, "%s: could not send default config, ret=%d\n",
> + node->name, ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator
> + * vreg: Pointer to the individual rpmh-regulator resource
> + * dev: Pointer to the top level rpmh-regulator PMIC device
> + * node: Pointer to the individual rpmh-regulator resource
> + * device node
> + * pmic_id: String used to identify the top level rpmh-regulator
> + * PMIC device on the board
> + * rpmh_data: Pointer to a null-terminated array of rpmh-regulator
> + * resources defined for the top level PMIC device
> + *
> + * Return: 0 on success, errno on failure
> + */
> +static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
> + struct device_node *node, const char *pmic_id,
> + const struct rpmh_vreg_init_data *rpmh_data)
> +{
> + struct regulator_config reg_config = {};
> + char rpmh_resource_name[20] = "";
> + struct regulator_dev *rdev;
> + enum rpmh_regulator_type type;
> + struct regulator_init_data *init_data;
> + unsigned int mode;
> + int i, ret;
> +
> + for (; rpmh_data->name; rpmh_data++)
> + if (!strcmp(rpmh_data->name, node->name))
> + break;
> +
> + if (!rpmh_data->name) {
> + dev_err(dev, "Unknown regulator %s\n", node->name);
> + return -EINVAL;
> + }
> +
> + scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name),
> + rpmh_data->resource_name, pmic_id);
> +
> + vreg->addr = cmd_db_read_addr(rpmh_resource_name);
> + if (!vreg->addr) {
> + dev_err(dev, "%s: could not find RPMh address for resource %s\n",
> + node->name, rpmh_resource_name);
> + return -ENODEV;
> + }
> +
> + vreg->rdesc.name = rpmh_data->name;
> + vreg->rdesc.supply_name = rpmh_data->supply_name;
> + vreg->regulator_type = rpmh_data->hw_data->regulator_type;
> + vreg->hw_data = rpmh_data->hw_data;
> +
> + if (rpmh_data->hw_data->n_voltages) {
> + vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range;
> + vreg->rdesc.n_linear_ranges = 1;
> + vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages;
> + }
> +
> + type = vreg->regulator_type;
> +
> + if (type == VRM) {
> + ret = rpmh_regulator_parse_vrm_modes(vreg, dev, node);
> + if (ret < 0)
> + return ret;
> + }
> +
> + vreg->always_wait_for_ack = of_property_read_bool(node,
> + "qcom,always-wait-for-ack");
> +
> + vreg->rdesc.owner = THIS_MODULE;
> + vreg->rdesc.type = REGULATOR_VOLTAGE;
> + vreg->rdesc.ops = vreg->hw_data->ops;
> + vreg->rdesc.of_map_mode = vreg->hw_data->of_map_mode;
> +
> + init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc);
> + if (!init_data)
> + return -ENOMEM;
> +
> + if (type == XOB && init_data->constraints.min_uV) {
> + vreg->rdesc.fixed_uV = init_data->constraints.min_uV;
> + vreg->rdesc.n_voltages = 1;
> + }
> +
> + if (vreg->hw_data->of_map_mode) {
> + init_data->constraints.valid_ops_mask |= REGULATOR_CHANGE_MODE;
> + for (i = 0; i < RPMH_REGULATOR_MODE_COUNT; i++) {
> + mode = vreg->hw_data->of_map_mode(i);
> + if (mode > 0)
> + init_data->constraints.valid_modes_mask |= mode;
> + }
> + }
> +
> + reg_config.dev = dev;
> + reg_config.init_data = init_data;
> + reg_config.of_node = node;
> + reg_config.driver_data = vreg;
> +
> + ret = rpmh_regulator_load_default_parameters(vreg, dev, node);
> + if (ret < 0)
> + return ret;
> +
> + rdev = devm_regulator_register(dev, &vreg->rdesc, &reg_config);
> + if (IS_ERR(rdev)) {
> + ret = PTR_ERR(rdev);
> + rdev = NULL;
> + dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n",
> + node->name, ret);
> + return ret;
> + }
> +
> + dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n",
> + node->name, rpmh_resource_name, vreg->addr);
> +
> + return ret;
> +}
> +
> +static const u32 pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
> + [REGULATOR_MODE_STANDBY] = 4,
> + [REGULATOR_MODE_IDLE] = 5,
> + [REGULATOR_MODE_NORMAL] = -EINVAL,
> + [REGULATOR_MODE_FAST] = 7,
> +};

Define constants for the modes on the PMIC4 side?

> +
> +static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int mode)
> +{
> + static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
> + [RPMH_REGULATOR_MODE_RET] = REGULATOR_MODE_STANDBY,
> + [RPMH_REGULATOR_MODE_LPM] = REGULATOR_MODE_IDLE,
> + [RPMH_REGULATOR_MODE_AUTO] = -EINVAL,
> + [RPMH_REGULATOR_MODE_HPM] = REGULATOR_MODE_FAST,
> + };
> +
> + if (mode >= RPMH_REGULATOR_MODE_COUNT)
> + return -EINVAL;
> +
> + return of_mode_map[mode];
> +}
> +
> +static const u32 pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
> + [REGULATOR_MODE_STANDBY] = 4,
> + [REGULATOR_MODE_IDLE] = 5,
> + [REGULATOR_MODE_NORMAL] = 6,
> + [REGULATOR_MODE_FAST] = 7,
> +};
> +
> +static unsigned int rpmh_regulator_pmic4_smps_of_map_mode(unsigned int mode)
> +{
> + static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
> + [RPMH_REGULATOR_MODE_RET] = REGULATOR_MODE_STANDBY,
> + [RPMH_REGULATOR_MODE_LPM] = REGULATOR_MODE_IDLE,
> + [RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_NORMAL,
> + [RPMH_REGULATOR_MODE_HPM] = REGULATOR_MODE_FAST,
> + };
> +
> + if (mode >= RPMH_REGULATOR_MODE_COUNT)
> + return -EINVAL;
> +
> + return of_mode_map[mode];
> +}
> +
> +static const u32 pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
> + [REGULATOR_MODE_STANDBY] = -EINVAL,
> + [REGULATOR_MODE_IDLE] = 1,
> + [REGULATOR_MODE_NORMAL] = 2,
> + [REGULATOR_MODE_FAST] = 3,
> +};
> +
> +static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int mode)
> +{
> + static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
> + [RPMH_REGULATOR_MODE_RET] = -EINVAL,
> + [RPMH_REGULATOR_MODE_LPM] = REGULATOR_MODE_IDLE,
> + [RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_NORMAL,
> + [RPMH_REGULATOR_MODE_HPM] = REGULATOR_MODE_FAST,
> + };
> +
> + if (mode >= RPMH_REGULATOR_MODE_COUNT)
> + return -EINVAL;
> +
> + return of_mode_map[mode];
> +}
> +
> +static const struct rpmh_vreg_hw_data pmic4_pldo = {
> + .regulator_type = VRM,
> + .ops = &rpmh_regulator_vrm_ops,
> + .voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
> + .n_voltages = 256,
> + .pmic_mode_map = pmic_mode_map_pmic4_ldo,
> + .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic4_pldo_lv = {
> + .regulator_type = VRM,
> + .ops = &rpmh_regulator_vrm_ops,
> + .voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
> + .n_voltages = 128,
> + .pmic_mode_map = pmic_mode_map_pmic4_ldo,
> + .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic4_nldo = {
> + .regulator_type = VRM,
> + .ops = &rpmh_regulator_vrm_ops,
> + .voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
> + .n_voltages = 128,
> + .pmic_mode_map = pmic_mode_map_pmic4_ldo,
> + .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = {
> + .regulator_type = VRM,
> + .ops = &rpmh_regulator_vrm_ops,
> + .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
> + .n_voltages = 216,
> + .pmic_mode_map = pmic_mode_map_pmic4_smps,
> + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = {
> + .regulator_type = VRM,
> + .ops = &rpmh_regulator_vrm_ops,
> + .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
> + .n_voltages = 259,
> + .pmic_mode_map = pmic_mode_map_pmic4_smps,
> + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic4_bob = {
> + .regulator_type = VRM,
> + .ops = &rpmh_regulator_vrm_bypass_ops,
> + .voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
> + .n_voltages = 84,
> + .pmic_mode_map = pmic_mode_map_pmic4_bob,
> + .of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
> + .bypass_mode = 0,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic4_lvs = {
> + .regulator_type = XOB,
> + .ops = &rpmh_regulator_xob_ops,
> + /* LVS hardware does not support voltage or mode configuration. */
> +};
> +
> +#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
> +{ \
> + .name = _name, \
> + .resource_name = _resource_name, \
> + .hw_data = _hw_data, \
> + .supply_name = _supply_name, \
> +}
> +
> +static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd_s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd_s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic4_hfsmps3, "vdd_s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic4_hfsmps3, "vdd_s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic4_hfsmps3, "vdd_s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic4_ftsmps426, "vdd_s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic4_ftsmps426, "vdd_s7"),
> + RPMH_VREG("smps8", "smp%s8", &pmic4_ftsmps426, "vdd_s8"),
> + RPMH_VREG("smps9", "smp%s9", &pmic4_ftsmps426, "vdd_s9"),
> + RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd_s10"),
> + RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd_s11"),
> + RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd_s12"),
> + RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd_s13"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic4_nldo, "vdd_l1_l27"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic4_nldo, "vdd_l2_l8_l17"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic4_nldo, "vdd_l3_l11"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd_l4_l5"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd_l4_l5"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic4_pldo, "vdd_l6"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic4_pldo_lv, "vdd_l7_l12_l14_l15"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic4_nldo, "vdd_l2_l8_l17"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic4_pldo, "vdd_l9"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic4_pldo, "vdd_l10_l23_l25"),
> + RPMH_VREG("ldo11", "ldo%s11", &pmic4_nldo, "vdd_l3_l11"),
> + RPMH_VREG("ldo12", "ldo%s12", &pmic4_pldo_lv, "vdd_l7_l12_l14_l15"),
> + RPMH_VREG("ldo13", "ldo%s13", &pmic4_pldo, "vdd_l13_l19_l21"),
> + RPMH_VREG("ldo14", "ldo%s14", &pmic4_pldo_lv, "vdd_l7_l12_l14_l15"),
> + RPMH_VREG("ldo15", "ldo%s15", &pmic4_pldo_lv, "vdd_l7_l12_l14_l15"),
> + RPMH_VREG("ldo16", "ldo%s16", &pmic4_pldo, "vdd_l16_l28"),
> + RPMH_VREG("ldo17", "ldo%s17", &pmic4_nldo, "vdd_l2_l8_l17"),
> + RPMH_VREG("ldo18", "ldo%s18", &pmic4_pldo, "vdd_l18_l22"),
> + RPMH_VREG("ldo19", "ldo%s19", &pmic4_pldo, "vdd_l13_l19_l21"),
> + RPMH_VREG("ldo20", "ldo%s20", &pmic4_pldo, "vdd_l20_l24"),
> + RPMH_VREG("ldo21", "ldo%s21", &pmic4_pldo, "vdd_l13_l19_l21"),
> + RPMH_VREG("ldo22", "ldo%s22", &pmic4_pldo, "vdd_l18_l22"),
> + RPMH_VREG("ldo23", "ldo%s23", &pmic4_pldo, "vdd_l10_l23_l25"),
> + RPMH_VREG("ldo24", "ldo%s24", &pmic4_pldo, "vdd_l20_l24"),
> + RPMH_VREG("ldo25", "ldo%s25", &pmic4_pldo, "vdd_l10_l23_l25"),
> + RPMH_VREG("ldo26", "ldo%s26", &pmic4_nldo, "vdd_l26"),
> + RPMH_VREG("ldo27", "ldo%s27", &pmic4_nldo, "vdd_l1_l27"),
> + RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd_l16_l28"),
> + RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vdd_lvs1_lvs2"),
> + RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vdd_lvs1_lvs2"),
> + {},
> +};
> +
> +static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
> + RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd_bob"),
> + {},
> +};
> +
> +static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd_s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd_s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd_s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd_s4"),
> + {},
> +};
> +
> +static int rpmh_regulator_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct rpmh_vreg_init_data *vreg_data;
> + struct rpmh_client *rpmh_client;
> + struct device_node *node;
> + struct rpmh_vreg *vreg;
> + const char *pmic_id;
> + int ret;
> +
> + ret = cmd_db_ready();
> + if (ret < 0) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "Command DB not available, ret=%d\n", ret);
> + return ret;
> + }
> +
> + vreg_data = of_device_get_match_data(dev);
> + if (!vreg_data)
> + return -ENODEV;
> +
> + ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id);
> + if (ret < 0) {
> + dev_err(dev, "qcom,pmic-id missing in DT node\n");
> + return ret;
> + }
> +
> + rpmh_client = rpmh_get_client(pdev);
> + if (IS_ERR(rpmh_client))
> + return PTR_ERR(rpmh_client);
> + platform_set_drvdata(pdev, rpmh_client);
> +
> + for_each_available_child_of_node(dev->of_node, node) {
> + vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
> + if (!vreg) {
> + ret = -ENOMEM;
> + of_node_put(node);
> + goto cleanup;
> + }
> +
> + vreg->rpmh_client = rpmh_client;
> +
> + ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
> + vreg_data);
> + if (ret < 0) {
> + of_node_put(node);
> + goto cleanup;
> + }
> + }
> +
> + return 0;
> +
> +cleanup:
> + rpmh_release(rpmh_client);
> +
> + return ret;
> +}
> +
> +static int rpmh_regulator_remove(struct platform_device *pdev)
> +{
> + struct rpmh_client *rpmh_client = platform_get_drvdata(pdev);
> +
> + rpmh_release(rpmh_client);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rpmh_regulator_match_table[] = {
> + {
> + .compatible = "qcom,pm8998-rpmh-regulators",
> + .data = pm8998_vreg_data,
> + },
> + {
> + .compatible = "qcom,pmi8998-rpmh-regulators",
> + .data = pmi8998_vreg_data,
> + },
> + {
> + .compatible = "qcom,pm8005-rpmh-regulators",
> + .data = pm8005_vreg_data,
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
> +
> +static struct platform_driver rpmh_regulator_driver = {
> + .driver = {
> + .name = "qcom-rpmh-regulator",
> + .of_match_table = of_match_ptr(rpmh_regulator_match_table),
> + },
> + .probe = rpmh_regulator_probe,
> + .remove = rpmh_regulator_remove,
> +};
> +module_platform_driver(rpmh_regulator_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
> +MODULE_LICENSE("GPL v2");

\
 
 \ /
  Last update: 2018-04-17 20:24    [W:0.210 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site