lkml.org 
[lkml]   [2018]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 05/11] ARM: smp: Add initialization of CNTVOFF
    Date
    The CNTVOFF register from arch timer is uninitialized.
    It should be done by the bootloader but it is currently not the case,
    even for boot CPU because this SoC is booting in secure mode.
    It leads to an random offset value meaning that each CPU will have a
    different time, which isn't working very well.

    Add assembly code used for boot CPU and secondary CPU cores to make
    sure that the CNTVOFF register is initialized. Because this code can
    be used by different platforms, add this assembly file in ARM's common
    folder.

    Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
    ---
    arch/arm/common/Makefile | 1 +
    arch/arm/common/secure_cntvoff.S | 31 +++++++++++++++++++++++++++++++
    arch/arm/include/asm/secure_cntvoff.h | 8 ++++++++
    3 files changed, 40 insertions(+)
    create mode 100644 arch/arm/common/secure_cntvoff.S
    create mode 100644 arch/arm/include/asm/secure_cntvoff.h

    diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
    index 70b4a14ed993..1e9f7af8f70f 100644
    --- a/arch/arm/common/Makefile
    +++ b/arch/arm/common/Makefile
    @@ -10,6 +10,7 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
    obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
    obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
    obj-$(CONFIG_SHARP_SCOOP) += scoop.o
    +obj-$(CONFIG_SMP) += secure_cntvoff.o
    obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
    obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
    CFLAGS_REMOVE_mcpm_entry.o = -pg
    diff --git a/arch/arm/common/secure_cntvoff.S b/arch/arm/common/secure_cntvoff.S
    new file mode 100644
    index 000000000000..68a4a8344319
    --- /dev/null
    +++ b/arch/arm/common/secure_cntvoff.S
    @@ -0,0 +1,31 @@
    +/* SPDX-License-Identifier: GPL-2.0
    + *
    + * Copyright (C) 2014 Renesas Electronics Corporation
    + *
    + * Initialization of CNTVOFF register from secure mode
    + *
    + */
    +
    +#include <linux/linkage.h>
    +#include <asm/assembler.h>
    +
    +ENTRY(secure_cntvoff_init)
    + .arch armv7-a
    + /*
    + * CNTVOFF has to be initialized either from non-secure Hypervisor
    + * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
    + * then it should be handled by the secure code
    + */
    + cps #MON_MODE
    + mrc p15, 0, r1, c1, c1, 0 /* Get Secure Config */
    + orr r0, r1, #1
    + mcr p15, 0, r0, c1, c1, 0 /* Set Non Secure bit */
    + isb
    + mov r0, #0
    + mcrr p15, 4, r0, r0, c14 /* CNTVOFF = 0 */
    + isb
    + mcr p15, 0, r1, c1, c1, 0 /* Set Secure bit */
    + isb
    + cps #SVC_MODE
    + ret lr
    +ENDPROC(secure_cntvoff_init)
    diff --git a/arch/arm/include/asm/secure_cntvoff.h b/arch/arm/include/asm/secure_cntvoff.h
    new file mode 100644
    index 000000000000..1f93aee1f630
    --- /dev/null
    +++ b/arch/arm/include/asm/secure_cntvoff.h
    @@ -0,0 +1,8 @@
    +/* SPDX-License-Identifier: GPL-2.0 */
    +
    +#ifndef __ASMARM_ARCH_CNTVOFF_H
    +#define __ASMARM_ARCH_CNTVOFF_H
    +
    +extern void secure_cntvoff_init(void);
    +
    +#endif
    --
    2.11.0
    \
     
     \ /
      Last update: 2018-04-16 23:54    [W:3.305 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site