lkml.org 
[lkml]   [2018]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND] backlight: pwm_bl: don't use GPIOF_* with gpiod_get_direction
On Wed, 11 Apr 2018, Simon Horman wrote:

> On Tue, Apr 10, 2018 at 02:32:40PM +0200, Wolfram Sang wrote:
> > The documentation was wrong, gpiod_get_direction() returns 0/1 instead
> > of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47
> > ("gpio: correct docs about return value of gpiod_get_direction"). Now,
> > fix this user (until a better, system-wide solution is in place).
> >
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Thanks for the Reviewed-by Simon. I have applied it to the original mail.

Do you know why you mail wasn't sent attached to the original thread?
For some reason I received this mail on it's own i.e. not in reply
to the original.

> > ---
> >
> > Changes since V1:
> > * rebased to top-of-linus-tree
> > * added tag from Daniel, thanks!
> >
> > Through which tree does this need to go?
> >
> > drivers/video/backlight/pwm_bl.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> > index 1c2289ddd555..0fa7d2bd0e48 100644
> > --- a/drivers/video/backlight/pwm_bl.c
> > +++ b/drivers/video/backlight/pwm_bl.c
> > @@ -301,14 +301,14 @@ static int pwm_backlight_probe(struct platform_device *pdev)
> >
> > /*
> > * If the GPIO is not known to be already configured as output, that
> > - * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL,
> > - * change the direction to output and set the GPIO as active.
> > + * is, if gpiod_get_direction returns either 1 or -EINVAL, change the
> > + * direction to output and set the GPIO as active.
> > * Do not force the GPIO to active when it was already output as it
> > * could cause backlight flickering or we would enable the backlight too
> > * early. Leave the decision of the initial backlight state for later.
> > */
> > if (pb->enable_gpio &&
> > - gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT)
> > + gpiod_get_direction(pb->enable_gpio) != 0)
> > gpiod_direction_output(pb->enable_gpio, 1);
> >
> > pb->power_supply = devm_regulator_get(&pdev->dev, "power");

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-04-16 11:14    [W:0.072 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site