lkml.org 
[lkml]   [2018]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
On 13 April 2018 at 14:36, Vinod Koul <vinod.koul@intel.com> wrote:
> On Fri, Apr 13, 2018 at 02:17:34PM +0800, Baolin Wang wrote:
>
>> > Agreed, users only care about grabbing a channel, setting a descriptor and
>> > submitting that.
>> >
>> > I think you need to go back and think about this a bit, please do go thru
>> > dmaengine documentation and see other driver examples.
>> >
>> > We don't typically expose these to users, they give us a transfer and we set
>> > that up in hardware for efficient. Its DMA so people expect us to use fastest
>> > mechanism available.
>>
>> But there are some configuration are really special for Spreadtrum
>> DMA, and must need user to specify how to configure, especially some
>> scenarios of audio. So I wander if we can add one pointer for
>> 'dma_slave_config' to expand some special DMA configuration
>> requirements, like:
>>
>> struct dma_slave_config {
>> ......
>> unsigned int slave_id;
>> void *platform_data;
>> };
>>
>> So if some DMA has some special configuration (such as Spreadtrum
>> DMA), they can user this platform_data pointer. Like xilinx DMA, they
>> also have some special configuration.
>
> Well we all think our HW is special and needs some additional stuff, most of
> the cases turns out not to be the case.
>
> Can you explain how audio in this case additional configuration...
>

Beside the general configuration, our audio driver will configure the
fragment length, block length, maybe transaction length, and they must
specify the request type and interrupt type, these are what we want to
export for users.

--
Baolin.wang
Best Regards

\
 
 \ /
  Last update: 2018-04-13 08:42    [W:0.093 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site