lkml.org 
[lkml]   [2018]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] dt-bindings: power: supply: qcom_bms: Add bindings
On Sat, Apr 07, 2018 at 06:57:45PM +0100, Craig Tatlor wrote:
> Add bindings for the Qualcomm Battery Monitoring system.
>
> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
> ---
> .../bindings/power/supply/qcom_bms.txt | 93 +++++++++++++++++++
> 1 file changed, 93 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/qcom_bms.txt
>
> diff --git a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> new file mode 100644
> index 000000000000..6296399edc09
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> @@ -0,0 +1,93 @@
> +Qualcomm Battery Measurement System
> +
> +The Qualcomm Battery Measurement System is found inside of Qualcomm PM8941

Is it Monitoring or Measurment?

> +PMICs. It provides OCV and coulomb counter registers that allow the kernel
> +to infer a capacity level.

s/kernel/OS/

OCV?

> +
> +Required properties:
> +- compatible: Should contain "qcom,pm8941-bms".
> +- reg: Specifies the SPMI address and length of the
> + controller's registers.
> +- interrupts: OCV threshold interrupt.
> +- io-channels: Should contain IIO channel specifier for the
> + ADC channel that reports battery temperature.
> +- io-channel-names: Should contain "temp".
> +- qcom,fcc-temp-legend: An array containing the temperature, in degC,
> + for each column of the FCC lookup table.

What's FCC?

> +- qcom,fcc-lut: An array of FCC values in mah, one entry for each
> + temperature defined in in qcom,fcc-temp-legend.
> +- qcom,ocv-temp-legend: An array containing the temperature, in degC,
> + for each column of the OCV lookup table.
> +- qcom,ocv-capacity-legend: An array containing the capacity for each
> + row of the OCV lookup table.
> +- qcom,ocv-lut: An array of OCV values in mV, one entry for each
> + capacity defined in qcom,ocv-capacity-legend.

Need to specify the sizes of these if not 32-bit.

All these seem to have units, so add unit suffixes as defined in
property-units.txt.

> +
> +Example:
> +
> + pm8941_vadc: vadc@3100 {

adc@...

> + compatible = "qcom,spmi-vadc";
> + reg = <0x3100>;
> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> +
> + bat_temp {
> + reg = <VADC_LR_MUX1_BAT_THERM>;
> + };
> + };
> +
> + bms@4000 {
> + compatible = "qcom,pm8941-bms";
> + reg = <0x4000>;
> + interrupts = <0x0 0x40 0x4 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "ocv_thr";
> +
> + io-channels = <&pm8941_vadc VADC_LR_MUX1_BAT_THERM>;
> + io-channel-names = "temp";
> +
> + qcom,fcc-temp-legend = /bits/ 8 <(-10) 0 25 50 65>;
> + qcom,fcc-lut = /bits/ 16 <6010 6070 6680 6780 6670>;
> +
> + qcom,ocv-capacity-legend = /bits/ 8 <100 95 90 85
> + 80 75 70 65
> + 60 55 50 45
> + 40 35 30 25
> + 20 15 10 9
> + 8 7 6 5 4
> + 3 2 1 0>;
> +
> + qcom,ocv-temp-legend = /bits/ 8 <(-10) 0 25 50 65>;
> + qcom,ocv-lut = /bits/ 16 <4288 4288 4306 4315 4315
> + 4261 4241 4259 4266 4246
> + 4201 4181 4201 4207 4187
> + 4153 4133 4150 4155 4135
> + 4105 4085 4100 4104 4084
> + 4058 4038 4052 4058 4038
> + 4012 3992 4004 4014 3994
> + 3970 3950 3959 3971 3951
> + 3931 3911 3915 3927 3907
> + 3899 3879 3880 3884 3864
> + 3873 3853 3851 3853 3833
> + 3848 3828 3827 3829 3809
> + 3829 3809 3808 3809 3789
> + 3815 3795 3791 3791 3771
> + 3801 3781 3775 3772 3752
> + 3785 3765 3751 3746 3726
> + 3767 3747 3727 3719 3699
> + 3750 3730 3702 3692 3672
> + 3728 3708 3680 3672 3652
> + 3720 3700 3676 3665 3645
> + 3712 3692 3670 3660 3645
> + 3695 3675 3658 3648 3633
> + 3662 3647 3629 3620 3610
> + 3620 3605 3589 3580 3570
> + 3562 3552 3538 3529 3519
> + 3490 3480 3474 3470 3465
> + 3403 3398 3388 3380 3375
> + 3320 3300 3255 3221 3206
> + 3000 3000 3000 3000 3000>;
> + };
> + };
> +};
> --
> 2.17.0
>

\
 
 \ /
  Last update: 2018-04-13 18:35    [W:0.128 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site