lkml.org 
[lkml]   [2018]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/8] drm/sun4i: Allwinner MIPI-DSI support
On Wed, Apr 04, 2018 at 11:57:08AM +0200, Maxime Ripard wrote:
> Hi,
>
> Here is an preliminary version of the MIPI-DSI support for the Allwinner
> SoCs.
>
> This controller can be found on a number of recent SoCs, such as the
> A31, A33 or the A64.
>
> Given the sparse documentation, there's a number of obscure areas, but
> the current implementation has been tested with a 4-lanes DSI panel on
> an A33.
>
> The support is a bit rough around the edges at the time, and some artifacts
> are still shown on the screen for some reasons. Wider testing with
> different display will hopefully nail those down.
>
> This needs the regmap_mmio_attach_clk, on its way to Linus in 4.17.
>
> Let me know what you think,
> Maxime
>
> Changes from v3:
> - Rebased on top of current drm-misc-next
> - Switched to SPDX license header
> - Made the ECC array const
> - Split the big DSI patch into two, one to add the DSI driver and one to
> add the TCON bits.
> - Removed the dithering code
> - Changed the DT labels to remove the indices
> - Used sleeps instead of delays in the panel driver
> - Used the backlight_enable / _disable functions
> - Added Chen-Yu's Reviewed-by
>
> Changes from v2:
> - Added a ports node under the DSI node
> - Changed the huarui panel driver to an ili9881c driver
> - Changed the panel vendor to bananapi
> - Made the init table static in the panel driver
> - Dropped the huarui vendor patch for the DT doc.
>
> Changes from v1:
> - Rebased on 4.16-rc1
> - Constified a few function arguments and structures
> - Reworked the DT binding example a bit
> - Reworked the panel driver to check for DSI return codes, and use DCS
> helpers when possible
>
> Maxime Ripard (8):
> drm/sun4i: tcon: Add TRI finish interrupt for vblank
> dt-bindings: display: Add Allwinner MIPI-DSI bindings
> drm/sun4i: Add Allwinner A31 MIPI-DSI controller support
> drm/sun4i: Tie the DSI controller in the TCON
> dt-bindings: panel: Add the Ilitek ILI9881c panel documentation
> drm/panel: Add Ilitek ILI9881c panel driver
> ARM: dts: sun8i: a33: Add the DSI-related nodes
> [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display

I just pushed the patches 1-4 and 7. I'll wait for some feedback from
Thierry for the panel driver.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-04-11 14:43    [W:0.104 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site