lkml.org 
[lkml]   [2018]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: sunxi: Change sun7i-a20-olimex-som204-evb to not use cd-inverted
Date
Commit 45e01f401a2a16 ("ARM: dts: sunxi: Switch MMC nodes away from
cd-inverted property") changed most of the sunxi boards away from using
the cd-inverted property in MMC nodes. However, the
sun7i-a20-olimex-som204-evb board which got merged concurrently with
that commit is now using cd-inverted. Switch it away from using
cd-inverted to be consistent with rest of the sunxi boards.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
---
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index eae8e267b9ef..3d7b5c848fef 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -172,8 +172,7 @@
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
status = "okay";
};

--
2.16.3
\
 
 \ /
  Last update: 2018-04-10 17:01    [W:0.040 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site