lkml.org 
[lkml]   [2018]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] mtd: nand: qcom: parse read errors for read oob also
Hi Abhishek,

On Wed, 4 Apr 2018 18:12:21 +0530, Abhishek Sahu
<absahu@codeaurora.org> wrote:

> read_page and read_oob both calls the read_page_ecc function.
> The QCOM NAND controller protect the OOB available bytes with
> ECC so read errors should be checked for read_oob also. Now
> this patch moves the error checking code inside read_page_ecc
> so caller does not have to check explicitly for read errors.
>
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>

Nitpick: the prefix should be "mtd: rawnand: qcom: " now as this driver
has been moved to drivers/mtd/nand/raw/.

Otherwise:
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

> ---
> drivers/mtd/nand/qcom_nandc.c | 19 ++++++-------------
> 1 file changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
> index 0ebcc55..ba43752 100644
> --- a/drivers/mtd/nand/qcom_nandc.c
> +++ b/drivers/mtd/nand/qcom_nandc.c
> @@ -1676,6 +1676,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
> struct nand_chip *chip = &host->chip;
> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> struct nand_ecc_ctrl *ecc = &chip->ecc;
> + u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
> int i, ret;
>
> config_nand_page_read(nandc);
> @@ -1741,6 +1742,9 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
>
> free_descs(nandc);
>
> + if (!ret)
> + ret = parse_read_errors(host, data_buf_start, oob_buf_start);
> +
> return ret;
> }
>
> @@ -1786,20 +1790,14 @@ static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> struct qcom_nand_host *host = to_qcom_nand_host(chip);
> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> u8 *data_buf, *oob_buf = NULL;
> - int ret;
>
> nand_read_page_op(chip, page, 0, NULL, 0);
> data_buf = buf;
> oob_buf = oob_required ? chip->oob_poi : NULL;
>
> clear_bam_transaction(nandc);
> - ret = read_page_ecc(host, data_buf, oob_buf);
> - if (ret) {
> - dev_err(nandc->dev, "failure to read page\n");
> - return ret;
> - }
>
> - return parse_read_errors(host, data_buf, oob_buf);
> + return read_page_ecc(host, data_buf, oob_buf);
> }
>
> /* implements ecc->read_page_raw() */
> @@ -1889,7 +1887,6 @@ static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
> struct qcom_nand_host *host = to_qcom_nand_host(chip);
> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> struct nand_ecc_ctrl *ecc = &chip->ecc;
> - int ret;
>
> clear_read_regs(nandc);
> clear_bam_transaction(nandc);
> @@ -1898,11 +1895,7 @@ static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
> set_address(host, 0, page);
> update_rw_regs(host, ecc->steps, true);
>
> - ret = read_page_ecc(host, NULL, chip->oob_poi);
> - if (ret)
> - dev_err(nandc->dev, "failure to read oob\n");
> -
> - return ret;
> + return read_page_ecc(host, NULL, chip->oob_poi);
> }
>
> /* implements ecc->write_page() */



--
Miquel Raynal, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-04-10 12:04    [W:0.248 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site