lkml.org 
[lkml]   [2018]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 4/9] mtd: nand: qcom: fix null pointer access for erased buffer detection
Hi Abhishek,

On Wed, 4 Apr 2018 18:12:20 +0530, Abhishek Sahu
<absahu@codeaurora.org> wrote:

> parse_read_errors can be called with only oob buf also in which
> case data_buf will be NULL. If data_buf is NULL, then don’t
> treat this page as completely erased in case of ECC uncorrectable
> error.
>
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> ---
> drivers/mtd/nand/qcom_nandc.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
> index 57c16a6..0ebcc55 100644
> --- a/drivers/mtd/nand/qcom_nandc.c
> +++ b/drivers/mtd/nand/qcom_nandc.c
> @@ -1607,9 +1607,11 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
> if (host->bch_enabled) {
> erased = (erased_cw & ERASED_CW) == ERASED_CW ?
> true : false;

Why the parse_read_errors() function could not be called without
data_buf when using BCH? Are you sure the situation can only happen
without it?

Would the following apply here too, with a:

if (!data_buf) {
erased = false;
} else {
if (host->bch_enabled)
...
else
...
}

> - } else {
> + } else if (data_buf) {
> erased = erased_chunk_check_and_fixup(data_buf,
> data_len);
> + } else {
> + erased = false;
> }
>
> if (erased) {
> @@ -1652,7 +1654,8 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
> max_bitflips = max(max_bitflips, stat);
> }
>
> - data_buf += data_len;
> + if (data_buf)
> + data_buf += data_len;
> if (oob_buf)
> oob_buf += oob_len + ecc->bytes;
> }

Thanks,
Miquèl

--
Miquel Raynal, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-04-10 11:13    [W:0.506 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site