lkml.org 
[lkml]   [2018]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] dmaengine: sprd: Define the DMA data width type
Date
Define the DMA data width type to make code more readable.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/dma/sprd-dma.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index af9c156..9f44d6f 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -185,6 +185,14 @@ enum sprd_dma_step {
SPRD_DMA_DWORD_STEP = BIT(3),
};

+/* dma data width values */
+enum sprd_dma_datawidth {
+ SPRD_DMA_DATAWIDTH_1_BYTE,
+ SPRD_DMA_DATAWIDTH_2_BYTES,
+ SPRD_DMA_DATAWIDTH_4_BYTES,
+ SPRD_DMA_DATAWIDTH_8_BYTES,
+};
+
/* dma channel hardware configuration */
struct sprd_dma_chn_hw {
u32 pause;
@@ -613,15 +621,15 @@ static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
u32 fix_mode = 0, fix_en = 0;

if (IS_ALIGNED(len, 4)) {
- datawidth = 2;
+ datawidth = SPRD_DMA_DATAWIDTH_4_BYTES;
src_step = SPRD_DMA_WORD_STEP;
des_step = SPRD_DMA_WORD_STEP;
} else if (IS_ALIGNED(len, 2)) {
- datawidth = 1;
+ datawidth = SPRD_DMA_DATAWIDTH_2_BYTES;
src_step = SPRD_DMA_SHORT_STEP;
des_step = SPRD_DMA_SHORT_STEP;
} else {
- datawidth = 0;
+ datawidth = SPRD_DMA_DATAWIDTH_1_BYTE;
src_step = SPRD_DMA_BYTE_STEP;
des_step = SPRD_DMA_BYTE_STEP;
}
--
1.7.9.5
\
 
 \ /
  Last update: 2018-04-10 09:48    [W:0.132 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site