lkml.org 
[lkml]   [2018]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 09/10] drivers/hwmon: Add PECI hwmon client drivers
On Tue, Apr 10, 2018 at 11:32:11AM -0700, Jae Hyun Yoo wrote:
> This commit adds PECI cputemp and dimmtemp hwmon drivers.
>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
> Reviewed-by: James Feist <james.feist@linux.intel.com>
> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
> Cc: Alan Cox <alan@linux.intel.com>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Fengguang Wu <fengguang.wu@intel.com>
> Cc: Greg KH <gregkh@linuxfoundation.org>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Julia Cartwright <juliac@eso.teric.us>
> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
> Cc: Milton Miller II <miltonm@us.ibm.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
> Cc: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
> ---
> drivers/hwmon/Kconfig | 28 ++
> drivers/hwmon/Makefile | 2 +
> drivers/hwmon/peci-cputemp.c | 783 ++++++++++++++++++++++++++++++++++++++++++
> drivers/hwmon/peci-dimmtemp.c | 432 +++++++++++++++++++++++
> 4 files changed, 1245 insertions(+)
> create mode 100644 drivers/hwmon/peci-cputemp.c
> create mode 100644 drivers/hwmon/peci-dimmtemp.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index f249a4428458..c52f610f81d0 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1259,6 +1259,34 @@ config SENSORS_NCT7904
> This driver can also be built as a module. If so, the module
> will be called nct7904.
>
> +config SENSORS_PECI_CPUTEMP
> + tristate "PECI CPU temperature monitoring support"
> + depends on OF
> + depends on PECI
> + help
> + If you say yes here you get support for the generic Intel PECI
> + cputemp driver which provides Digital Thermal Sensor (DTS) thermal
> + readings of the CPU package and CPU cores that are accessible using
> + the PECI Client Command Suite via the processor PECI client.
> + Check Documentation/hwmon/peci-cputemp for details.
> +
> + This driver can also be built as a module. If so, the module
> + will be called peci-cputemp.
> +
> +config SENSORS_PECI_DIMMTEMP
> + tristate "PECI DIMM temperature monitoring support"
> + depends on OF
> + depends on PECI
> + help
> + If you say yes here you get support for the generic Intel PECI hwmon
> + driver which provides Digital Thermal Sensor (DTS) thermal readings of
> + DIMM components that are accessible using the PECI Client Command
> + Suite via the processor PECI client.
> + Check Documentation/hwmon/peci-dimmtemp for details.
> +
> + This driver can also be built as a module. If so, the module
> + will be called peci-dimmtemp.
> +
> config SENSORS_NSA320
> tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
> depends on GPIOLIB && OF
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index e7d52a36e6c4..48d9598fcd3a 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -136,6 +136,8 @@ obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
> obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
> obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
> obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
> +obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
> +obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o
> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
> new file mode 100644
> index 000000000000..f0bc92687512
> --- /dev/null
> +++ b/drivers/hwmon/peci-cputemp.c
> @@ -0,0 +1,783 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Intel Corporation
> +
> +#include <linux/delay.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>

Is this include needed ?

> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/peci.h>
> +
> +#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
> +
> +#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
> +#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
> +#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
> +
> +#define DEFAULT_CHANNEL_NUMS 5
> +#define CORETEMP_CHANNEL_NUMS CORE_MAX_ON_SKX
> +#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
> +
> +#define CLIENT_CPU_ID_MASK 0xf0ff0 /* Mask for Family / Model info */
> +
> +#define UPDATE_INTERVAL_MIN HZ
> +
> +enum cpu_gens {
> + CPU_GEN_HSX, /* Haswell Xeon */
> + CPU_GEN_BRX, /* Broadwell Xeon */
> + CPU_GEN_SKX, /* Skylake Xeon */
> + CPU_GEN_MAX
> +};
> +
> +struct cpu_gen_info {
> + u32 type;
> + u32 cpu_id;
> + u32 core_max;
> +};
> +
> +struct temp_data {
> + bool valid;
> + s32 value;
> + unsigned long last_updated;
> +};
> +
> +struct temp_group {
> + struct temp_data die;
> + struct temp_data dts_margin;
> + struct temp_data tcontrol;
> + struct temp_data tthrottle;
> + struct temp_data tjmax;
> + struct temp_data core[CORETEMP_CHANNEL_NUMS];
> +};
> +
> +struct peci_cputemp {
> + struct peci_client *client;
> + struct device *dev;
> + char name[PECI_NAME_SIZE];
> + struct temp_group temp;
> + u8 addr;
> + uint cpu_no;
> + const struct cpu_gen_info *gen_info;
> + u32 core_mask;
> + u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
> + uint config_idx;
> + struct hwmon_channel_info temp_info;
> + const struct hwmon_channel_info *info[2];
> + struct hwmon_chip_info chip;
> +};
> +
> +enum cputemp_channels {
> + channel_die,
> + channel_dts_mrgn,
> + channel_tcontrol,
> + channel_tthrottle,
> + channel_tjmax,
> + channel_core,
> +};
> +
> +static const struct cpu_gen_info cpu_gen_info_table[] = {
> + { .type = CPU_GEN_HSX,
> + .cpu_id = 0x306f0, /* Family code: 6, Model number: 63 (0x3f) */
> + .core_max = CORE_MAX_ON_HSX },
> + { .type = CPU_GEN_BRX,
> + .cpu_id = 0x406f0, /* Family code: 6, Model number: 79 (0x4f) */
> + .core_max = CORE_MAX_ON_BDX },
> + { .type = CPU_GEN_SKX,
> + .cpu_id = 0x50650, /* Family code: 6, Model number: 85 (0x55) */
> + .core_max = CORE_MAX_ON_SKX },
> +};
> +
> +static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
> + /* Die temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> + HWMON_T_CRIT_HYST,
> +
> + /* DTS margin temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_LCRIT,
> +
> + /* Tcontrol temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
> +
> + /* Tthrottle temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT,
> +
> + /* Tjmax temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT,
> +
> + /* Core temperature - for all core channels */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> + HWMON_T_CRIT_HYST,
> +};
> +
> +static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
> + "Die",
> + "DTS margin",
> + "Tcontrol",
> + "Tthrottle",
> + "Tjmax",
> + "Core 0", "Core 1", "Core 2", "Core 3",
> + "Core 4", "Core 5", "Core 6", "Core 7",
> + "Core 8", "Core 9", "Core 10", "Core 11",
> + "Core 12", "Core 13", "Core 14", "Core 15",
> + "Core 16", "Core 17", "Core 18", "Core 19",
> + "Core 20", "Core 21", "Core 22", "Core 23",
> +};
> +
> +static int send_peci_cmd(struct peci_cputemp *priv,
> + enum peci_cmd cmd,
> + void *msg)
> +{
> + return peci_command(priv->client->adapter, cmd, msg);
> +}
> +
> +static int need_update(struct temp_data *temp)

Please use bool.

> +{
> + if (temp->valid &&
> + time_before(jiffies, temp->last_updated + UPDATE_INTERVAL_MIN))
> + return 0;
> +
> + return 1;
> +}
> +
> +static void mark_updated(struct temp_data *temp)
> +{
> + temp->valid = true;
> + temp->last_updated = jiffies;
> +}
> +
> +static s32 ten_dot_six_to_millidegree(s32 val)
> +{
> + return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
> +}
> +
> +static int get_tjmax(struct peci_cputemp *priv)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + int rc;
> +
> + if (!priv->temp.tjmax.valid) {
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_TEMP_TARGET;
> + msg.param = 0;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + priv->temp.tjmax.value = (s32)msg.pkg_config[2] * 1000;
> + priv->temp.tjmax.valid = true;
> + }
> +
> + return 0;
> +}
> +
> +static int get_tcontrol(struct peci_cputemp *priv)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + s32 tcontrol_margin;
> + s32 tthrottle_offset;
> + int rc;
> +
> + if (!need_update(&priv->temp.tcontrol))
> + return 0;
> +
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_TEMP_TARGET;
> + msg.param = 0;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + tcontrol_margin = msg.pkg_config[1];
> + tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
> + priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
> +
> + tthrottle_offset = (msg.pkg_config[3] & 0x2f) * 1000;
> + priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
> +
> + mark_updated(&priv->temp.tcontrol);
> + mark_updated(&priv->temp.tthrottle);
> +
> + return 0;
> +}
> +
> +static int get_tthrottle(struct peci_cputemp *priv)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + s32 tcontrol_margin;
> + s32 tthrottle_offset;
> + int rc;
> +
> + if (!need_update(&priv->temp.tthrottle))
> + return 0;
> +
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_TEMP_TARGET;
> + msg.param = 0;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + tthrottle_offset = (msg.pkg_config[3] & 0x2f) * 1000;
> + priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
> +
> + tcontrol_margin = msg.pkg_config[1];
> + tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
> + priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
> +
> + mark_updated(&priv->temp.tthrottle);
> + mark_updated(&priv->temp.tcontrol);
> +
> + return 0;
> +}

I am quite completely missing how the two functions above are different.

> +
> +static int get_die_temp(struct peci_cputemp *priv)
> +{
> + struct peci_get_temp_msg msg;
> + int rc;
> +
> + if (!need_update(&priv->temp.die))
> + return 0;
> +
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + msg.addr = priv->addr;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_GET_TEMP, &msg);
> + if (rc)
> + return rc;
> +
> + priv->temp.die.value = priv->temp.tjmax.value +
> + ((s32)msg.temp_raw * 1000 / 64);
> +
> + mark_updated(&priv->temp.die);
> +
> + return 0;
> +}
> +
> +static int get_dts_margin(struct peci_cputemp *priv)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + s32 dts_margin;
> + int rc;
> +
> + if (!need_update(&priv->temp.dts_margin))
> + return 0;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_DTS_MARGIN;
> + msg.param = 0;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + dts_margin = (msg.pkg_config[1] << 8) | msg.pkg_config[0];
> +
> + /**
> + * Processors return a value of DTS reading in 10.6 format
> + * (10 bits signed decimal, 6 bits fractional).
> + * Error codes:
> + * 0x8000: General sensor error
> + * 0x8001: Reserved
> + * 0x8002: Underflow on reading value
> + * 0x8003-0x81ff: Reserved
> + */
> + if (dts_margin >= 0x8000 && dts_margin <= 0x81ff)
> + return -EIO;
> +
> + dts_margin = ten_dot_six_to_millidegree(dts_margin);
> +
> + priv->temp.dts_margin.value = dts_margin;
> +
> + mark_updated(&priv->temp.dts_margin);
> +
> + return 0;
> +}
> +
> +static int get_core_temp(struct peci_cputemp *priv, int core_index)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + s32 core_dts_margin;
> + int rc;
> +
> + if (!need_update(&priv->temp.core[core_index]))
> + return 0;
> +
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_PER_CORE_DTS_TEMP;
> + msg.param = core_index;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + core_dts_margin = (msg.pkg_config[1] << 8) | msg.pkg_config[0];
> +
> + /**
> + * Processors return a value of the core DTS reading in 10.6 format
> + * (10 bits signed decimal, 6 bits fractional).
> + * Error codes:
> + * 0x8000: General sensor error
> + * 0x8001: Reserved
> + * 0x8002: Underflow on reading value
> + * 0x8003-0x81ff: Reserved
> + */
> + if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
> + return -EIO;
> +
> + core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
> +
> + priv->temp.core[core_index].value = priv->temp.tjmax.value +
> + core_dts_margin;
> +
> + mark_updated(&priv->temp.core[core_index]);
> +
> + return 0;
> +}
> +

There is a lot of duplication in those functions. Would it be possible
to find common code and use functions for it instead of duplicating
everything several times ?

> +static int find_core_index(struct peci_cputemp *priv, int channel)
> +{
> + int core_channel = channel - DEFAULT_CHANNEL_NUMS;
> + int idx, found = 0;
> +
> + for (idx = 0; idx < priv->gen_info->core_max; idx++) {
> + if (priv->core_mask & BIT(idx)) {
> + if (core_channel == found)
> + break;
> +
> + found++;
> + }
> + }
> +
> + return idx;

What if nothing is found ?

> +}
> +
> +static int cputemp_read_string(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int core_index;
> +
> + switch (attr) {
> + case hwmon_temp_label:
> + if (channel < DEFAULT_CHANNEL_NUMS) {
> + *str = cputemp_label[channel];
> + } else {
> + core_index = find_core_index(priv, channel);

FWIW, it might be better to pass channel - DEFAULT_CHANNEL_NUMS
as parameter.

What if find_core_index() returns priv->gen_info->core_max, ie
if it didn't find a core ?

> + *str = cputemp_label[DEFAULT_CHANNEL_NUMS + core_index];
> + }
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int cputemp_read_die(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_die_temp(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.die.value;
> + return 0;
> + case hwmon_temp_max:
> + rc = get_tcontrol(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tcontrol.value;
> + return 0;
> + case hwmon_temp_crit:
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tjmax.value;
> + return 0;
> + case hwmon_temp_crit_hyst:
> + rc = get_tcontrol(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int cputemp_read_dts_margin(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_dts_margin(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.dts_margin.value;
> + return 0;
> + case hwmon_temp_min:
> + *val = 0;
> + return 0;

This attribute should not exist.

> + case hwmon_temp_lcrit:
> + rc = get_tcontrol(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tcontrol.value - priv->temp.tjmax.value;

lcrit is tcontrol - tjmax, and crit_hyst above is
tjmax - tcontrol ? How does this make sense ?

> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int cputemp_read_tcontrol(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_tcontrol(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tcontrol.value;
> + return 0;
> + case hwmon_temp_crit:
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tjmax.value;
> + return 0;

Am I missing something, or is the same temperature reported several times ?
tjmax is also reported as temp_crit cputemp_read_die(), for example.

> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int cputemp_read_tthrottle(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_tthrottle(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tthrottle.value;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int cputemp_read_tjmax(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tjmax.value;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int cputemp_read_core(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> + int core_index = find_core_index(priv, channel);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_core_temp(priv, core_index);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.core[core_index].value;
> + return 0;
> + case hwmon_temp_max:
> + rc = get_tcontrol(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tcontrol.value;
> + return 0;
> + case hwmon_temp_crit:
> + rc = get_tjmax(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tjmax.value;
> + return 0;
> + case hwmon_temp_crit_hyst:
> + rc = get_tcontrol(priv);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}

There is again a lot of duplication in those functions.

> +
> +static int cputemp_read(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + switch (channel) {
> + case channel_die:
> + return cputemp_read_die(dev, type, attr, channel, val);
> + case channel_dts_mrgn:
> + return cputemp_read_dts_margin(dev, type, attr, channel, val);
> + case channel_tcontrol:
> + return cputemp_read_tcontrol(dev, type, attr, channel, val);
> + case channel_tthrottle:
> + return cputemp_read_tthrottle(dev, type, attr, channel, val);
> + case channel_tjmax:
> + return cputemp_read_tjmax(dev, type, attr, channel, val);
> + default:
> + if (channel < CPUTEMP_CHANNEL_NUMS)
> + return cputemp_read_core(dev, type, attr, channel, val);
> +
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t cputemp_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct peci_cputemp *priv = data;
> +
> + if (priv->temp_config[channel] & BIT(attr))
> + return 0444;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_ops cputemp_ops = {
> + .is_visible = cputemp_is_visible,
> + .read_string = cputemp_read_string,
> + .read = cputemp_read,
> +};
> +
> +static int check_resolved_cores(struct peci_cputemp *priv)
> +{
> + struct peci_rd_pci_cfg_local_msg msg;
> + int rc;
> +
> + if (!(priv->client->adapter->cmd_mask & BIT(PECI_CMD_RD_PCI_CFG_LOCAL)))
> + return -EINVAL;
> +
> + /* Get the RESOLVED_CORES register value */
> + msg.addr = priv->addr;
> + msg.bus = 1;
> + msg.device = 30;
> + msg.function = 3;
> + msg.reg = 0xB4;

Can this be made less magic with some defines ?

> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PCI_CFG_LOCAL, &msg);
> + if (rc)
> + return rc;
> +
> + priv->core_mask = msg.pci_config[3] << 24 |
> + msg.pci_config[2] << 16 |
> + msg.pci_config[1] << 8 |
> + msg.pci_config[0];
> +
> + if (!priv->core_mask)
> + return -EAGAIN;
> +
> + dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
> + return 0;
> +}
> +
> +static int create_core_temp_info(struct peci_cputemp *priv)
> +{
> + int rc, i;
> +
> + rc = check_resolved_cores(priv);
> + if (!rc) {
> + for (i = 0; i < priv->gen_info->core_max; i++) {
> + if (priv->core_mask & BIT(i)) {
> + priv->temp_config[priv->config_idx++] =
> + config_table[channel_core];
> + }
> + }
> + }
> +
> + return rc;
> +}
> +
> +static int check_cpu_id(struct peci_cputemp *priv)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + u32 cpu_id;
> + int i, rc;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_CPU_ID;
> + msg.param = PKG_ID_CPU_ID;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + cpu_id = ((msg.pkg_config[2] << 16) | (msg.pkg_config[1] << 8) |
> + msg.pkg_config[0]) & CLIENT_CPU_ID_MASK;
> +
> + for (i = 0; i < CPU_GEN_MAX; i++) {
> + if (cpu_id == cpu_gen_info_table[i].cpu_id) {
> + priv->gen_info = &cpu_gen_info_table[i];
> + break;
> + }
> + }
> +
> + if (!priv->gen_info)
> + return -ENODEV;
> +
> + dev_dbg(priv->dev, "CPU_ID: 0x%x\n", cpu_id);
> + return 0;
> +}
> +
> +static int peci_cputemp_probe(struct peci_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct peci_cputemp *priv;
> + struct device *hwmon_dev;
> + int rc;
> +
> + if ((client->adapter->cmd_mask &
> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) {
> + dev_err(dev, "Client doesn't support temperature monitoring\n");
> + return -EINVAL;

Does this mean there will be an error message for each non-supported CPU ?
Why ?

> + }
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, priv);
> + priv->client = client;
> + priv->dev = dev;
> + priv->addr = client->addr;
> + priv->cpu_no = priv->addr - PECI_BASE_ADDR;
> +
> + snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d",
> + priv->cpu_no);
> +
> + rc = check_cpu_id(priv);
> + if (rc) {
> + dev_err(dev, "Client CPU is not supported\n");

-ENODEV is not an error, and should not result in an error message.
Besides, the error can also be propagated from peci core code,
and may well be something else.

> + return rc;
> + }
> +
> + priv->temp_config[priv->config_idx++] = config_table[channel_die];
> + priv->temp_config[priv->config_idx++] = config_table[channel_dts_mrgn];
> + priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
> + priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
> + priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
> +
> + rc = create_core_temp_info(priv);
> + if (rc)
> + dev_dbg(dev, "Failed to create core temp info\n");

Then what ? Shouldn't this result in probe deferral or something more useful
instead of just being ignored ?

> +
> + priv->chip.ops = &cputemp_ops;
> + priv->chip.info = priv->info;
> +
> + priv->info[0] = &priv->temp_info;
> +
> + priv->temp_info.type = hwmon_temp;
> + priv->temp_info.config = priv->temp_config;
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
> + priv->name,
> + priv,
> + &priv->chip,
> + NULL);
> +
> + if (IS_ERR(hwmon_dev))
> + return PTR_ERR(hwmon_dev);
> +
> + dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id peci_cputemp_of_table[] = {
> + { .compatible = "intel,peci-cputemp" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
> +
> +static struct peci_driver peci_cputemp_driver = {
> + .probe = peci_cputemp_probe,
> + .driver = {
> + .name = "peci-cputemp",
> + .of_match_table = of_match_ptr(peci_cputemp_of_table),
> + },
> +};
> +module_peci_driver(peci_cputemp_driver);
> +
> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
> +MODULE_DESCRIPTION("PECI cputemp driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
> new file mode 100644
> index 000000000000..78bf29cb2c4c
> --- /dev/null
> +++ b/drivers/hwmon/peci-dimmtemp.c

FWIW, this should be two separate patches.

> @@ -0,0 +1,432 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Intel Corporation
> +
> +#include <linux/delay.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>

Needed ?

> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/peci.h>
> +#include <linux/workqueue.h>
> +
> +#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
> +
> +#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
> +#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
> +
> +#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
> +#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
> +
> +#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
> +#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
> +
> +#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
> +#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
> +
> +#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
> +
> +#define CLIENT_CPU_ID_MASK 0xf0ff0 /* Mask for Family / Model info */
> +
> +#define UPDATE_INTERVAL_MIN HZ
> +
> +#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
> +#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
> +
> +enum cpu_gens {
> + CPU_GEN_HSX, /* Haswell Xeon */
> + CPU_GEN_BRX, /* Broadwell Xeon */
> + CPU_GEN_SKX, /* Skylake Xeon */
> + CPU_GEN_MAX
> +};
> +
> +struct cpu_gen_info {
> + u32 type;
> + u32 cpu_id;
> + u32 chan_rank_max;
> + u32 dimm_idx_max;
> +};
> +
> +struct temp_data {
> + bool valid;
> + s32 value;
> + unsigned long last_updated;
> +};
> +
> +struct peci_dimmtemp {
> + struct peci_client *client;
> + struct device *dev;
> + struct workqueue_struct *work_queue;
> + struct delayed_work work_handler;
> + char name[PECI_NAME_SIZE];
> + struct temp_data temp[DIMM_NUMS_MAX];
> + u8 addr;
> + uint cpu_no;
> + const struct cpu_gen_info *gen_info;
> + u32 dimm_mask;
> + int retry_count;
> + int channels;
> + u32 temp_config[DIMM_NUMS_MAX + 1];
> + struct hwmon_channel_info temp_info;
> + const struct hwmon_channel_info *info[2];
> + struct hwmon_chip_info chip;
> +};
> +
> +static const struct cpu_gen_info cpu_gen_info_table[] = {
> + { .type = CPU_GEN_HSX,
> + .cpu_id = 0x306f0, /* Family code: 6, Model number: 63 (0x3f) */
> + .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
> + { .type = CPU_GEN_BRX,
> + .cpu_id = 0x406f0, /* Family code: 6, Model number: 79 (0x4f) */
> + .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
> + { .type = CPU_GEN_SKX,
> + .cpu_id = 0x50650, /* Family code: 6, Model number: 85 (0x55) */
> + .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
> +};
> +
> +static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
> + { "DIMM A0", "DIMM A1", "DIMM A2" },
> + { "DIMM B0", "DIMM B1", "DIMM B2" },
> + { "DIMM C0", "DIMM C1", "DIMM C2" },
> + { "DIMM D0", "DIMM D1", "DIMM D2" },
> + { "DIMM E0", "DIMM E1", "DIMM E2" },
> + { "DIMM F0", "DIMM F1", "DIMM F2" },
> + { "DIMM G0", "DIMM G1", "DIMM G2" },
> + { "DIMM H0", "DIMM H1", "DIMM H2" },
> +};
> +
> +static int send_peci_cmd(struct peci_dimmtemp *priv, enum peci_cmd cmd,
> + void *msg)
> +{
> + return peci_command(priv->client->adapter, cmd, msg);
> +}
> +
> +static int need_update(struct temp_data *temp)
> +{
> + if (temp->valid &&
> + time_before(jiffies, temp->last_updated + UPDATE_INTERVAL_MIN))
> + return 0;
> +
> + return 1;
> +}
> +
> +static void mark_updated(struct temp_data *temp)
> +{
> + temp->valid = true;
> + temp->last_updated = jiffies;
> +}

It might make sense to provide the duplicate functions in a core file.

> +
> +static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
> +{
> + int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
> + int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
> + struct peci_rd_pkg_cfg_msg msg;
> + int rc;
> +
> + if (!need_update(&priv->temp[dimm_no]))
> + return 0;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_DDR_DIMM_TEMP;
> + msg.param = chan_rank;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + priv->temp[dimm_no].value = msg.pkg_config[dimm_order] * 1000;
> +
> + mark_updated(&priv->temp[dimm_no]);
> +
> + return 0;
> +}
> +
> +static int find_dimm_number(struct peci_dimmtemp *priv, int channel)
> +{
> + int dimm_nums_max = priv->gen_info->chan_rank_max *
> + priv->gen_info->dimm_idx_max;
> + int idx, found = 0;
> +
> + for (idx = 0; idx < dimm_nums_max; idx++) {
> + if (priv->dimm_mask & BIT(idx)) {
> + if (channel == found)
> + break;
> +
> + found++;
> + }
> + }
> +
> + return idx;
> +}

This again looks like duplicate code.

> +
> +static int dimmtemp_read_string(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + struct peci_dimmtemp *priv = dev_get_drvdata(dev);
> + u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
> + int dimm_no, chan_rank, dimm_idx;
> +
> + switch (attr) {
> + case hwmon_temp_label:
> + dimm_no = find_dimm_number(priv, channel);
> + chan_rank = dimm_no / dimm_idx_max;
> + dimm_idx = dimm_no % dimm_idx_max;
> + *str = dimmtemp_label[chan_rank][dimm_idx];
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_dimmtemp *priv = dev_get_drvdata(dev);
> + int dimm_no = find_dimm_number(priv, channel);
> + int rc;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + rc = get_dimm_temp(priv, dimm_no);
> + if (rc)
> + return rc;
> +
> + *val = priv->temp[dimm_no].value;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t dimmtemp_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_temp_label:
> + case hwmon_temp_input:
> + return 0444;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct hwmon_ops dimmtemp_ops = {
> + .is_visible = dimmtemp_is_visible,
> + .read_string = dimmtemp_read_string,
> + .read = dimmtemp_read,
> +};
> +
> +static int check_populated_dimms(struct peci_dimmtemp *priv)
> +{
> + u32 chan_rank_max = priv->gen_info->chan_rank_max;
> + u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
> + struct peci_rd_pkg_cfg_msg msg;
> + int chan_rank, dimm_idx;
> + int rc, channels = 0;
> +
> + for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_DDR_DIMM_TEMP;
> + msg.param = chan_rank;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc) {
> + priv->dimm_mask = 0;
> + return rc;
> + }
> +
> + for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++) {
> + if (msg.pkg_config[dimm_idx]) {
> + priv->dimm_mask |= BIT(chan_rank *
> + chan_rank_max +
> + dimm_idx);
> + channels++;
> + }
> + }
> + }
> +
> + if (!priv->dimm_mask)
> + return -EAGAIN;
> +
> + priv->channels = channels;
> +
> + dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
> + return 0;
> +}
> +
> +static int create_dimm_temp_info(struct peci_dimmtemp *priv)
> +{
> + struct device *hwmon_dev;
> + int rc, i;
> +
> + rc = check_populated_dimms(priv);
> + if (!rc) {

Please handle error cases first.

> + for (i = 0; i < priv->channels; i++)
> + priv->temp_config[i] = HWMON_T_LABEL | HWMON_T_INPUT;
> +
> + priv->chip.ops = &dimmtemp_ops;
> + priv->chip.info = priv->info;
> +
> + priv->info[0] = &priv->temp_info;
> +
> + priv->temp_info.type = hwmon_temp;
> + priv->temp_info.config = priv->temp_config;
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
> + priv->name,
> + priv,
> + &priv->chip,
> + NULL);
> + rc = PTR_ERR_OR_ZERO(hwmon_dev);
> + if (!rc)
> + dev_dbg(priv->dev, "%s: sensor '%s'\n",
> + dev_name(hwmon_dev), priv->name);
> + } else if (rc == -EAGAIN) {
> + if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
> + queue_delayed_work(priv->work_queue,
> + &priv->work_handler,
> + DIMM_MASK_CHECK_DELAY_JIFFIES);
> + priv->retry_count++;
> + dev_dbg(priv->dev,
> + "Deferred DIMM temp info creation\n");
> + } else {
> + rc = -ETIMEDOUT;
> + dev_err(priv->dev,
> + "Timeout retrying DIMM temp info creation\n");
> + }
> + }
> +
> + return rc;
> +}
> +
> +static void create_dimm_temp_info_delayed(struct work_struct *work)
> +{
> + struct delayed_work *dwork = to_delayed_work(work);
> + struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
> + work_handler);
> + int rc;
> +
> + rc = create_dimm_temp_info(priv);
> + if (rc && rc != -EAGAIN)
> + dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
> +}
> +
> +static int check_cpu_id(struct peci_dimmtemp *priv)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + u32 cpu_id;
> + int i, rc;
> +
> + msg.addr = priv->addr;
> + msg.index = MBX_INDEX_CPU_ID;
> + msg.param = PKG_ID_CPU_ID;
> + msg.rx_len = 4;
> +
> + rc = send_peci_cmd(priv, PECI_CMD_RD_PKG_CFG, &msg);
> + if (rc)
> + return rc;
> +
> + cpu_id = ((msg.pkg_config[2] << 16) | (msg.pkg_config[1] << 8) |
> + msg.pkg_config[0]) & CLIENT_CPU_ID_MASK;
> +
> + for (i = 0; i < CPU_GEN_MAX; i++) {
> + if (cpu_id == cpu_gen_info_table[i].cpu_id) {
> + priv->gen_info = &cpu_gen_info_table[i];
> + break;
> + }
> + }
> +
> + if (!priv->gen_info)
> + return -ENODEV;
> +
> + dev_dbg(priv->dev, "CPU_ID: 0x%x\n", cpu_id);
> + return 0;
> +}

More duplicate code.

> +
> +static int peci_dimmtemp_probe(struct peci_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct peci_dimmtemp *priv;
> + int rc;
> +
> + if ((client->adapter->cmd_mask &
> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) {

One set of ( ) is unnecessary on each side of the expression.

> + dev_err(dev, "Client doesn't support temperature monitoring\n");
> + return -EINVAL;

Why is this "invalid", and why does it warrant an error message ?

> + }
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, priv);
> + priv->client = client;
> + priv->dev = dev;
> + priv->addr = client->addr;
> + priv->cpu_no = priv->addr - PECI_BASE_ADDR;

Is priv->addr guaranteed to be >= PECI_BASE_ADDR ?
> +
> + snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
> + priv->cpu_no);
> +
> + rc = check_cpu_id(priv);
> + if (rc) {
> + dev_err(dev, "Client CPU is not supported\n");

Or the peci command failed.

> + return rc;
> + }
> +
> + priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
> + if (!priv->work_queue)
> + return -ENOMEM;
> +
> + INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
> +
> + rc = create_dimm_temp_info(priv);
> + if (rc && rc != -EAGAIN) {
> + dev_err(dev, "Failed to create DIMM temp info\n");
> + goto err_free_wq;
> + }
> +
> + return 0;
> +
> +err_free_wq:
> + destroy_workqueue(priv->work_queue);
> + return rc;
> +}
> +
> +static int peci_dimmtemp_remove(struct peci_client *client)
> +{
> + struct peci_dimmtemp *priv = dev_get_drvdata(&client->dev);
> +
> + cancel_delayed_work(&priv->work_handler);

cancel_delayed_work_sync() ?

> + destroy_workqueue(priv->work_queue);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id peci_dimmtemp_of_table[] = {
> + { .compatible = "intel,peci-dimmtemp" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, peci_dimmtemp_of_table);
> +
> +static struct peci_driver peci_dimmtemp_driver = {
> + .probe = peci_dimmtemp_probe,
> + .remove = peci_dimmtemp_remove,
> + .driver = {
> + .name = "peci-dimmtemp",
> + .of_match_table = of_match_ptr(peci_dimmtemp_of_table),
> + },
> +};
> +module_peci_driver(peci_dimmtemp_driver);
> +
> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
> +MODULE_DESCRIPTION("PECI dimmtemp driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.16.2
>

\
 
 \ /
  Last update: 2018-04-11 01:35    [W:0.575 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site