lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 3/5] drm/dp_mst: Add drm_dp_mst_topology_mgr_lower_link_rate()
    Date
    Unlike SST, MST can have far more then a single display hooked up on a
    single port. What this also means however, is that if the DisplayPort
    link to the top-level MST branch device becomes unstable then every
    single branch device also has an unstable link. Additionally, MST has a
    few more steps that must be taken in order to properly retrain the
    entire topology under a lower link rate. Since the VCID allocations for
    each mstb is determined based off the link rate for the top of the
    topology, we also have to recalculate all of the VCID allocations for
    the downstream ports as well to ensure that we still have enough link
    bandwidth to drive each mstb.

    Additionally, since we have multiple downstream connectors per port,
    setting the link status of the parent mstb's port to bad isn't enough:
    all of the downstream mstb ports have to have their link status set to
    bad.

    This basically follows the same paradigm that our DP link status logic
    in DRM does, in that we simply tell userspace that all of the mstb ports
    need retraining and additionally applying the new lower bandwidth
    constraints to all of the atomic commits on the topology that follow.

    Since the work of figuring out which connectors live downstream on an
    MST topology and updating their link status is something that any driver
    supporting MST is going to need to do in order to retrain MST links
    properly, we add the drm_dp_mst_topology_mgr_lower_link_rate() helper
    which simply recalculates the pbn_div for a given mst topology, then
    marks the link status of all connectors living in that topology as bad.
    We'll make use of it in i915 later in this series.

    Signed-off-by: Lyude Paul <lyude@redhat.com>
    Cc: Manasi Navare <manasi.d.navare@intel.com>
    Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
    ---
    drivers/gpu/drm/drm_dp_mst_topology.c | 73 ++++++++++++++++++++++++++++++++++-
    include/drm/drm_dp_mst_helper.h | 3 ++
    2 files changed, 75 insertions(+), 1 deletion(-)

    diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
    index 6fac4129e6a2..0d6604500b29 100644
    --- a/drivers/gpu/drm/drm_dp_mst_topology.c
    +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
    @@ -2076,7 +2076,7 @@ static bool drm_dp_get_vc_payload_bw(int dp_link_bw,
    {
    switch (dp_link_bw) {
    default:
    - DRM_DEBUG_KMS("invalid link bandwidth in DPCD: %x (link count: %d)\n",
    + DRM_DEBUG_KMS("invalid link bandwidth: %x (link count: %d)\n",
    dp_link_bw, dp_link_count);
    return false;

    @@ -2096,6 +2096,77 @@ static bool drm_dp_get_vc_payload_bw(int dp_link_bw,
    return true;
    }

    +static void drm_dp_set_mstb_link_status(struct drm_dp_mst_branch *mstb,
    + enum drm_link_status status)
    +{
    + struct drm_dp_mst_branch *rmstb;
    + struct drm_dp_mst_port *port;
    +
    + list_for_each_entry(port, &mstb->ports, next) {
    + rmstb = drm_dp_get_validated_mstb_ref(mstb->mgr, port->mstb);
    + if (rmstb) {
    + drm_dp_set_mstb_link_status(rmstb, status);
    + drm_dp_put_mst_branch_device(rmstb);
    + }
    +
    + if (port->connector)
    + port->connector->state->link_status = status;
    + }
    +}
    +
    +/**
    + * drm_dp_mst_topology_mgr_lower_link_rate() - Override the DP link bw/count
    + * for all connectors in a given MST topology
    + * @mgr: manager to set state for
    + * @dp_link_bw: The new DP link bandwidth
    + * @dp_link_count: The new DP link count
    + *
    + * This is called by the driver when it detects that the current DP link for
    + * the given topology manager is unstable, and needs to be retrained at a
    + * lower link rate.
    + *
    + * This takes care of updating the link status on all downstream connectors
    + * along with recalculating the VC payloads. The driver should send a hotplug
    + * event after calling this function to notify userspace of the link status
    + * change.
    + *
    + * RETURNS:
    + *
    + * True for success, or negative error code on failure.
    + */
    +int drm_dp_mst_topology_mgr_lower_link_rate(struct drm_dp_mst_topology_mgr *mgr,
    + int dp_link_bw, int dp_link_count)
    +{
    + struct drm_device *dev = mgr->dev;
    + struct drm_dp_mst_branch *mst_primary;
    + int new_pbn_div;
    + int ret = 0;
    +
    + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
    +
    + if (!drm_dp_get_vc_payload_bw(drm_dp_link_rate_to_bw_code(dp_link_bw),
    + dp_link_count, &new_pbn_div)) {
    + ret = -EINVAL;
    + goto out;
    + }
    +
    + mst_primary = drm_dp_get_validated_mstb_ref(mgr, mgr->mst_primary);
    + if (!mst_primary)
    + goto out;
    +
    + DRM_DEBUG_KMS("MST link failed to retrain, lowering pbn_div to %d\n",
    + new_pbn_div);
    + mgr->pbn_div = new_pbn_div;
    +
    + drm_dp_set_mstb_link_status(mst_primary, DRM_MODE_LINK_STATUS_BAD);
    +
    + drm_dp_put_mst_branch_device(mst_primary);
    +out:
    + drm_modeset_unlock(&dev->mode_config.connection_mutex);
    + return ret;
    +}
    +EXPORT_SYMBOL(drm_dp_mst_topology_mgr_lower_link_rate);
    +
    /**
    * drm_dp_mst_topology_mgr_set_mst() - Set the MST state for a topology manager
    * @mgr: manager to set state for
    diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
    index 7f78d26a0766..6261ec43a2c0 100644
    --- a/include/drm/drm_dp_mst_helper.h
    +++ b/include/drm/drm_dp_mst_helper.h
    @@ -634,4 +634,7 @@ int drm_dp_atomic_release_vcpi_slots(struct drm_atomic_state *state,
    int drm_dp_send_power_updown_phy(struct drm_dp_mst_topology_mgr *mgr,
    struct drm_dp_mst_port *port, bool power_up);

    +int drm_dp_mst_topology_mgr_lower_link_rate(struct drm_dp_mst_topology_mgr *mgr,
    + int dp_link_bw, int dp_link_count);
    +
    #endif
    --
    2.14.3
    \
     
     \ /
      Last update: 2018-03-09 22:35    [W:3.091 / U:0.280 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site