lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] power: reset: Add Spreadtrum SC27xx PMIC power off support
Hi,

On Mon, Feb 26, 2018 at 10:23:14AM +0800, Baolin Wang wrote:
> On Spreadtrum platform, we need power off system through external SC27xx
> series PMICs including the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
> Thus this patch adds SC27xx series PMICs power-off support.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---

Thanks, queued.

-- Sebastian

> Changes since v3:
> - Add CONFIG_PM_SLEEP_SMP macro to avoid building error.
>
> Changes since v2:
> - Change to build-in this driver.
>
> Changes since v1:
> - Add remove interface.
> - Add regmap checking when probing the driver.
> - Add MODULE_ALIAS()
> ---
> drivers/power/reset/Kconfig | 9 +++++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/sc27xx-poweroff.c | 66 +++++++++++++++++++++++++++++++++
> 3 files changed, 76 insertions(+)
> create mode 100644 drivers/power/reset/sc27xx-poweroff.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index ca0de1a..01543f5 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -227,5 +227,14 @@ config SYSCON_REBOOT_MODE
> register, then the bootloader can read it to take different
> action according to the mode.
>
> +config POWER_RESET_SC27XX
> + bool "Spreadtrum SC27xx PMIC power-off driver"
> + depends on MFD_SC27XX_PMIC || COMPILE_TEST
> + help
> + This driver supports powering off a system through
> + Spreadtrum SC27xx series PMICs. The SC27xx series
> + PMICs includes the SC2720, SC2721, SC2723, SC2730
> + and SC2731 chips.
> +
> endif
>
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index aeb65ed..225d645 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -27,3 +27,4 @@ obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
> obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
> obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
> obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
> +obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
> diff --git a/drivers/power/reset/sc27xx-poweroff.c b/drivers/power/reset/sc27xx-poweroff.c
> new file mode 100644
> index 0000000..65c477e
> --- /dev/null
> +++ b/drivers/power/reset/sc27xx-poweroff.c
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Spreadtrum Communications Inc.
> + * Copyright (C) 2018 Linaro Ltd.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/regmap.h>
> +#include <linux/syscore_ops.h>
> +
> +#define SC27XX_PWR_PD_HW 0xc2c
> +#define SC27XX_PWR_OFF_EN BIT(0)
> +
> +static struct regmap *regmap;
> +
> +/*
> + * On Spreadtrum platform, we need power off system through external SC27xx
> + * series PMICs, and it is one similar SPI bus mapped by regmap to access PMIC,
> + * which is not fast io access.
> + *
> + * So before stopping other cores, we need release other cores' resource by
> + * taking cpus down to avoid racing regmap or spi mutex lock when poweroff
> + * system through PMIC.
> + */
> +void sc27xx_poweroff_shutdown(void)
> +{
> +#ifdef CONFIG_PM_SLEEP_SMP
> + int cpu = smp_processor_id();
> +
> + freeze_secondary_cpus(cpu);
> +#endif
> +}
> +
> +static struct syscore_ops poweroff_syscore_ops = {
> + .shutdown = sc27xx_poweroff_shutdown,
> +};
> +
> +static void sc27xx_poweroff_do_poweroff(void)
> +{
> + regmap_write(regmap, SC27XX_PWR_PD_HW, SC27XX_PWR_OFF_EN);
> +}
> +
> +static int sc27xx_poweroff_probe(struct platform_device *pdev)
> +{
> + if (regmap)
> + return -EINVAL;
> +
> + regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!regmap)
> + return -ENODEV;
> +
> + pm_power_off = sc27xx_poweroff_do_poweroff;
> + register_syscore_ops(&poweroff_syscore_ops);
> + return 0;
> +}
> +
> +static struct platform_driver sc27xx_poweroff_driver = {
> + .probe = sc27xx_poweroff_probe,
> + .driver = {
> + .name = "sc27xx-poweroff",
> + },
> +};
> +builtin_platform_driver(sc27xx_poweroff_driver);
> --
> 1.7.9.5
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-09 17:14    [W:0.034 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site