lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] pinctrl: bcm2835: Update docs about generic pinctrl bindings support
Hi Matheus,

> Matheus Castello <matheus@castello.eng.br> hat am 9. März 2018 um 05:16 geschrieben:
>
>
> Now we have generic pin configuration and multiplexing support,
> ahd shoud be preferred than brcm legacy one.

i suspect this patch won't get noticed by the DT maintainer because of the wrong subject.

Please try something like this:

dt-bindings: pinctrl: bcm2835-gpio: Add generic pinctrl support

Even this sounds strange to you, but this patch must be the first patch of series (1/3).

Stefan

>
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
> .../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> index 2569866..58b4720 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> @@ -36,6 +36,25 @@ listed. In other words, a subnode that lists only a mux function implies no
> information about any pull configuration. Similarly, a subnode that lists only
> a pul parameter implies no information about the mux function.
>
> +This driver supports the generic pin multiplexing and configuration
> +bindings. For details on each properties, you can refer to
> +./pinctrl-bindings.txt.
> +
> +Required sub-node properties:
> + - pins
> + - function
> +
> +Optional sub-node properties:
> + - bias-disable
> + - bias-pull-up
> + - bias-pull-down
> + - output-high
> + - output-low
> +
> +Legacy pin configuration and multiplexing binding:
> +*** (Its use is deprecated, use generic multiplexing and configuration
> +bindings instead)
> +
> Required subnode-properties:
> - brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs
> are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53.
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-03-09 12:48    [W:0.314 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site