lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 5/9] x86/dumpstack: Improve opcodes dumping in the Code: section
On Thu, Mar 08, 2018 at 03:20:58PM -0800, Linus Torvalds wrote:
> Yes, so the reason the prologue is more important is that there's
> really two cases for the "Code:" line:

Yap, I had a hunch it must be about some of those but thanks for taking
the time and writing it down!

I've tried to summarize the reasoning and slap it as a comment above it
so that it is clear why we do it this way:

---
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c3aa0e29513e..7a21098c9128 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -71,6 +71,25 @@ static void printk_stack_address(unsigned long address, int reliable,
printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address);
}

+/*
+ * The are a couple of reasons for the 2/3rd prologue, courtesy of Linus:
+ *
+ * In case where we don't have the exact kernel image (which, if we did, we can
+ * simply disassemble and navigate to the RIP), the purpose of the bigger
+ * prologue is to have more context and to be able to correlate the code from
+ * the different toolchains better.
+ *
+ * In addition, it helps in recreating the register allocation of the failing
+ * kernel and thus make sense of the register dump.
+ *
+ * What is more, the additional complication of a variable length insn arch like
+ * x86 warrants having longer byte sequence before rIP so that the disassembler
+ * can "sync" up properly and find instruction boundaries when decoding the
+ * opcode bytes.
+ *
+ * Thus, the 2/3rds prologue and 64 byte OPCODE_BUFSIZE is just a random
+ * guesstimate in attempt to achieve all of the above.
+ */
void show_opcodes(u8 *rip, const char *loglvl)
{
#define OPCODE_BUFSIZE 64
--
Regards/Gruss,
Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

\
 
 \ /
  Last update: 2018-03-09 11:16    [W:0.042 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site