lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: i.MX25: define SSI FIFO depth
Hi,

On Thu, 8 Mar 2018 16:38:32 +0100 Martin Kaiser wrote:
> Hi Lothar,
>
> Thus wrote Lothar Waßmann (LW@KARO-electronics.de):
>
> > > diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> > > index 9725705..cf70df2 100644
> > > --- a/arch/arm/boot/dts/imx25.dtsi
> > > +++ b/arch/arm/boot/dts/imx25.dtsi
> > > @@ -269,6 +269,7 @@
> > > dmas = <&sdma 24 1 0>,
> > > <&sdma 25 1 0>;
> > > dma-names = "rx", "tx";
> > > + fsl,fifo-depth = <15>;
> > > status = "disabled";
> > > };
>
> > > @@ -329,6 +330,7 @@
> > > dmas = <&sdma 28 1 0>,
> > > <&sdma 29 1 0>;
> > > dma-names = "rx", "tx";
> > > + fsl,fifo-depth = <15>;
> > > status = "disabled";
> > > };
>
> > You are changing the global .dtsi file. Did you test this change with
> > all devices that are affected by it?
>
> I changed the hardware description of the imx25 SSI to match the
> reference manual.
>
> I did test this change on an imx25 board with audio playback. This uses
> the SSI description I modified. I verified that the driver is actually
> taking the modified setting into account and that this causes no
> problems.
>
> As of today, this setting is used by the fsl_ssi driver to set the fifo
> water level for dma requests.
>
> Of course, I don't have access to the enitre range of supported imx25
> boards and I don't think this is required for submitting patches.
>
> Do you have any indication why this patch should not be merged?
>
Usually patches should not willy-nilly change the behaviour of existing
configurations unless they fix any real life bugs.


Lothar Waßmann

\
 
 \ /
  Last update: 2018-03-09 09:38    [W:0.064 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site