lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle
Date
The R-Car V3M Eagle board includes a transparent LVDS decoder, connected
to the on-chip LVDS encoder output on one side and to HDMI encoder
ADV7511w on the other one.

As the decoder does not need any configuration it has been so-far
omitted from DTS. Now that a driver for transparent LVDS decoder is
available, describe it in DT as well.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 31 ++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index c0fd144..0d62b40 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -42,6 +42,33 @@
};
};
};
+
+ lvds_decoder {
+ compatible = "thine,thc63lvd1024";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+
+ lvds_dec_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+
+ };
+
+ };
+ };
};

&avb {
@@ -98,7 +125,7 @@
port@0 {
reg = <0>;
adv7511_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_dec_out>;
};
};

@@ -153,7 +180,7 @@
ports {
port@1 {
endpoint {
- remote-endpoint = <&adv7511_in>;
+ remote-endpoint = <&lvds_dec_in>;
};
};
};
--
2.7.4
\
 
 \ /
  Last update: 2018-03-08 16:25    [W:0.051 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site