lkml.org 
[lkml]   [2018]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v4 3/4] of: Documentation: Add x86 local APIC ID property
Current x86 Device Tree implementation does not support multiprocessing.
Add new "intel,apic-id" property to allow using CPU descriptions
in Device Tree data provided by the U-Boot loader.
Address specified in 'reg' to be used as default local APIC ID
to avoid breaking existing systems with DTB provided by firmware.

Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
---
Documentation/devicetree/bindings/x86/ce4100.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/x86/ce4100.txt b/Documentation/devicetree/bindings/x86/ce4100.txt
index b49ae59..d15de48 100644
--- a/Documentation/devicetree/bindings/x86/ce4100.txt
+++ b/Documentation/devicetree/bindings/x86/ce4100.txt
@@ -14,11 +14,17 @@ The CPU node
compatible = "intel,ce4100";
reg = <0>;
lapic = <&lapic0>;
+ intel,apic-id = <0>;
};

The reg property describes the CPU number. The lapic property points to
the local APIC timer.

+Optional properties:
+
+- intel,apic-id: local APIC ID.
+ The address specified in "reg" is used as default local APIC ID.
+
The SoC node
------------

--
2.7.4
\
 
 \ /
  Last update: 2018-03-07 20:55    [W:0.083 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site