lkml.org 
[lkml]   [2018]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/3] dt-bindings: dmaengine: Add MediaTek High-Speed DMA controller bindings
On Wed, Mar 07, 2018 at 04:16:26PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Document the devicetree bindings for MediaTek High-Speed DMA controller
> which could be found on MT7623 SoC or other similar Mediatek SoCs.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> .../devicetree/bindings/dma/mtk-hsdma.txt | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/mtk-hsdma.txt

Please add reviewed-by's when posting new versions.

>
> diff --git a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
> new file mode 100644
> index 0000000..4bb31735
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
> @@ -0,0 +1,33 @@
> +MediaTek High-Speed DMA Controller
> +==================================
> +
> +This device follows the generic DMA bindings defined in dma/dma.txt.
> +
> +Required properties:
> +
> +- compatible: Must be one of
> + "mediatek,mt7622-hsdma": for MT7622 SoC
> + "mediatek,mt7623-hsdma": for MT7623 SoC
> +- reg: Should contain the register's base address and length.
> +- interrupts: Should contain a reference to the interrupt used by this
> + device.
> +- clocks: Should be the clock specifiers corresponding to the entry in
> + clock-names property.
> +- clock-names: Should contain "hsdma" entries.
> +- power-domains: Phandle to the power domain that the device is part of
> +- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
> + in dmas property of a client device represents the channel
> + number.
> +Example:
> +
> + hsdma: dma-controller@1b007000 {
> + compatible = "mediatek,mt7623-hsdma";
> + reg = <0 0x1b007000 0 0x1000>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&ethsys CLK_ETHSYS_HSDMA>;
> + clock-names = "hsdma";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> + #dma-cells = <1>;
> + };
> +
> +DMA clients must use the format described in dma/dma.txt file.
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-03-07 20:29    [W:0.118 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site