lkml.org 
[lkml]   [2018]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 02/12] [media] cxd2880-spi: Add support for CXD2880 SPI interface
Em Thu, 18 Jan 2018 17:46:10 +0900
<Yasunari.Takiguchi@sony.com> escreveu:

> From: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
>
> This is the SPI adapter part of the driver for the
> Sony CXD2880 DVB-T2/T tuner + demodulator.

Thanks for the patches!

The patch series look ok. Just a few nitpicks that could be solved
later.

I had to apply a few patches to make it build and remove some
warnings with W=1. Patches sent.

With that, I'm applying this series.

Regards,
Mauro

>
> Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com>
> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com>
> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com>
> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com>
> ---
>
> [Change list]
> Changes in V5
> Using SPDX-License-Identifier
> drivers/media/spi/cxd2880-spi.c
> -modified typo about "ivnalid" -> "invalid"
> -modified typo about "drvier" -> "driver"
> -removed unnecessary if()
> -modified return error code
> -reduction of valiable names
> -removed unnecessary parentheses
> -changed members of struct cxd2880_ts_buf_info
>
> Changes in V4
> drivers/media/spi/cxd2880-spi.c
> -removed Camel case
> -removed unnecessary initialization at variable declaration
> -removed unnecessary brace {}
>
> Changes in V3
> drivers/media/spi/cxd2880-spi.c
> -adjusted of indent spaces
> -removed unnecessary cast
> -changed debugging code
> -changed timeout method
> -modified coding style of if()
> -changed hexadecimal code to lower case.
>
> Changes in V2
> drivers/media/spi/cxd2880-spi.c
> -Modified PID filter setting.
>
> drivers/media/spi/cxd2880-spi.c | 670 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 670 insertions(+)
> create mode 100644 drivers/media/spi/cxd2880-spi.c
>
> diff --git a/drivers/media/spi/cxd2880-spi.c b/drivers/media/spi/cxd2880-spi.c
> new file mode 100644
> index 000000000000..857e4c0d7a92
> --- /dev/null
> +++ b/drivers/media/spi/cxd2880-spi.c
> @@ -0,0 +1,670 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * cxd2880-spi.c
> + * Sony CXD2880 DVB-T2/T tuner + demodulator driver
> + * SPI adapter
> + *
> + * Copyright (C) 2016, 2017, 2018 Sony Semiconductor Solutions Corporation
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
> +
> +#include <linux/spi/spi.h>
> +#include <linux/ktime.h>
> +
> +#include "dvb_demux.h"
> +#include "dmxdev.h"
> +#include "dvb_frontend.h"
> +#include "cxd2880.h"
> +
> +#define CXD2880_MAX_FILTER_SIZE 32
> +#define BURST_WRITE_MAX 128
> +#define MAX_TRANS_PKT 300
> +
> +struct cxd2880_ts_buf_info {
> + u8 read_ready:1;
> + u8 almost_full:1;
> + u8 almost_empty:1;
> + u8 overflow:1;
> + u8 underflow:1;
> + u16 pkt_num;
> +};
> +
> +struct cxd2880_pid_config {
> + u8 is_enable;
> + u16 pid;
> +};
> +
> +struct cxd2880_pid_filter_config {
> + u8 is_negative;
> + struct cxd2880_pid_config pid_config[CXD2880_MAX_FILTER_SIZE];
> +};
> +
> +struct cxd2880_dvb_spi {
> + struct dvb_frontend dvb_fe;
> + struct dvb_adapter adapter;
> + struct dvb_demux demux;
> + struct dmxdev dmxdev;
> + struct dmx_frontend dmx_fe;
> + struct task_struct *cxd2880_ts_read_thread;
> + struct spi_device *spi;
> + struct mutex spi_mutex; /* For SPI access exclusive control */
> + int feed_count;
> + int all_pid_feed_count;
> + u8 *ts_buf;
> + struct cxd2880_pid_filter_config filter_config;
> +};
> +
> +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
> +
> +static int cxd2880_write_spi(struct spi_device *spi, u8 *data, u32 size)
> +{
> + struct spi_message msg;
> + struct spi_transfer tx;
> +
> + if (!spi || !data) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + memset(&tx, 0, sizeof(tx));

Nitpick:

instead, you could just declare tx as:

struct spi_transfer tx = {};

and get rid of memset (same applies to similar code blocks).


> + tx.tx_buf = data;
> + tx.len = size;
> +
> + spi_message_init(&msg);
> + spi_message_add_tail(&tx, &msg);
> +
> + return spi_sync(spi, &msg);
> +}
> +
> +static int cxd2880_write_reg(struct spi_device *spi,
> + u8 sub_address, const u8 *data, u32 size)
> +{
> + u8 send_data[BURST_WRITE_MAX + 4];
> + const u8 *write_data_top = NULL;
> + int ret = 0;
> +
> + if (!spi || !data) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> + if (size > BURST_WRITE_MAX) {
> + pr_err("data size > WRITE_MAX\n");
> + return -EINVAL;
> + }
> +
> + if (sub_address + size > 0x100) {
> + pr_err("out of range\n");
> + return -EINVAL;
> + }

It is better to use dev_err(spi->dev, ...) instead of pr_err().


> +
> + send_data[0] = 0x0e;
> + write_data_top = data;
> +
> + while (size > 0) {
> + send_data[1] = sub_address;
> + if (size > 255)
> + send_data[2] = 255;
> + else
> + send_data[2] = (u8)size;
> +
> + memcpy(&send_data[3], write_data_top, send_data[2]);
> +
> + ret = cxd2880_write_spi(spi, send_data, send_data[2] + 3);
> + if (ret) {
> + pr_err("write spi failed %d\n", ret);
> + break;
> + }
> + sub_address += send_data[2];
> + write_data_top += send_data[2];
> + size -= send_data[2];
> + }
> +
> + return ret;
> +}
> +
> +static int cxd2880_spi_read_ts(struct spi_device *spi,
> + u8 *read_data,
> + u32 packet_num)
> +{
> + int ret;
> + u8 data[3];
> + struct spi_message message;
> + struct spi_transfer transfer[2];
> +
> + if (!spi || !read_data || !packet_num) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> + if (packet_num > 0xffff) {
> + pr_err("packet num > 0xffff\n");
> + return -EINVAL;
> + }
> +
> + data[0] = 0x10;
> + data[1] = packet_num >> 8;
> + data[2] = packet_num;
> +
> + spi_message_init(&message);
> + memset(transfer, 0, sizeof(transfer));
> +
> + transfer[0].len = 3;
> + transfer[0].tx_buf = data;
> + spi_message_add_tail(&transfer[0], &message);
> + transfer[1].len = packet_num * 188;
> + transfer[1].rx_buf = read_data;
> + spi_message_add_tail(&transfer[1], &message);
> +
> + ret = spi_sync(spi, &message);
> + if (ret)
> + pr_err("spi_write_then_read failed\n");
> +
> + return ret;
> +}
> +
> +static int cxd2880_spi_read_ts_buffer_info(struct spi_device *spi,
> + struct cxd2880_ts_buf_info *info)
> +{
> + u8 send_data = 0x20;
> + u8 recv_data[2];
> + int ret;
> +
> + if (!spi || !info) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + ret = spi_write_then_read(spi, &send_data, 1,
> + recv_data, sizeof(recv_data));
> + if (ret)
> + pr_err("spi_write_then_read failed\n");
> +
> + info->read_ready = (recv_data[0] & 0x80) ? 1 : 0;
> + info->almost_full = (recv_data[0] & 0x40) ? 1 : 0;
> + info->almost_empty = (recv_data[0] & 0x20) ? 1 : 0;
> + info->overflow = (recv_data[0] & 0x10) ? 1 : 0;
> + info->underflow = (recv_data[0] & 0x08) ? 1 : 0;
> + info->pkt_num = ((recv_data[0] & 0x07) << 8) | recv_data[1];
> +
> + return ret;
> +}
> +
> +static int cxd2880_spi_clear_ts_buffer(struct spi_device *spi)
> +{
> + u8 data = 0x03;
> + int ret;
> +
> + ret = cxd2880_write_spi(spi, &data, 1);
> +
> + if (ret)
> + pr_err("write spi failed\n");
> +
> + return ret;
> +}
> +
> +static int cxd2880_set_pid_filter(struct spi_device *spi,
> + struct cxd2880_pid_filter_config *cfg)
> +{
> + u8 data[65];
> + int i;
> + u16 pid = 0;
> + int ret;
> +
> + if (!spi) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + data[0] = 0x00;
> + ret = cxd2880_write_reg(spi, 0x00, &data[0], 1);
> + if (ret)
> + return ret;
> + if (!cfg) {
> + data[0] = 0x02;
> + ret = cxd2880_write_reg(spi, 0x50, &data[0], 1);
> + } else {
> + data[0] = cfg->is_negative ? 0x01 : 0x00;
> +
> + for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) {
> + pid = cfg->pid_config[i].pid;
> + if (cfg->pid_config[i].is_enable) {
> + data[1 + (i * 2)] = (pid >> 8) | 0x20;
> + data[2 + (i * 2)] = pid & 0xff;
> + } else {
> + data[1 + (i * 2)] = 0x00;
> + data[2 + (i * 2)] = 0x00;
> + }
> + }
> + ret = cxd2880_write_reg(spi, 0x50, data, 65);
> + }
> +
> + return ret;
> +}
> +
> +static int cxd2880_update_pid_filter(struct cxd2880_dvb_spi *dvb_spi,
> + struct cxd2880_pid_filter_config *cfg,
> + bool is_all_pid_filter)
> +{
> + int ret;
> +
> + if (!dvb_spi || !cfg) {
> + pr_err("invalid arg.\n");
> + return -EINVAL;
> + }
> +
> + mutex_lock(&dvb_spi->spi_mutex);
> + if (is_all_pid_filter) {
> + struct cxd2880_pid_filter_config tmpcfg;
> +
> + memset(&tmpcfg, 0, sizeof(tmpcfg));
> + tmpcfg.is_negative = 1;
> + tmpcfg.pid_config[0].is_enable = 1;
> + tmpcfg.pid_config[0].pid = 0x1fff;
> +
> + ret = cxd2880_set_pid_filter(dvb_spi->spi, &tmpcfg);
> + } else {
> + ret = cxd2880_set_pid_filter(dvb_spi->spi, cfg);
> + }
> + mutex_unlock(&dvb_spi->spi_mutex);
> +
> + if (ret)
> + pr_err("set_pid_filter failed\n");
> +
> + return ret;
> +}
> +
> +static int cxd2880_ts_read(void *arg)
> +{
> + struct cxd2880_dvb_spi *dvb_spi = NULL;
> + struct cxd2880_ts_buf_info info;
> + ktime_t start;
> + u32 i;
> + int ret;
> +
> + dvb_spi = arg;
> + if (!dvb_spi) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + ret = cxd2880_spi_clear_ts_buffer(dvb_spi->spi);
> + if (ret) {
> + pr_err("set_clear_ts_buffer failed\n");
> + return ret;
> + }
> +
> + start = ktime_get();
> + while (!kthread_should_stop()) {
> + ret = cxd2880_spi_read_ts_buffer_info(dvb_spi->spi,
> + &info);
> + if (ret) {
> + pr_err("spi_read_ts_buffer_info error\n");
> + return ret;
> + }
> +
> + if (info.pkt_num > MAX_TRANS_PKT) {
> + for (i = 0; i < info.pkt_num / MAX_TRANS_PKT; i++) {
> + cxd2880_spi_read_ts(dvb_spi->spi,
> + dvb_spi->ts_buf,
> + MAX_TRANS_PKT);
> + dvb_dmx_swfilter(&dvb_spi->demux,
> + dvb_spi->ts_buf,
> + MAX_TRANS_PKT * 188);
> + }
> + start = ktime_get();
> + } else if ((info.pkt_num > 0) &&
> + (ktime_to_ms(ktime_sub(ktime_get(), start)) >= 500)) {
> + cxd2880_spi_read_ts(dvb_spi->spi,
> + dvb_spi->ts_buf,
> + info.pkt_num);
> + dvb_dmx_swfilter(&dvb_spi->demux,
> + dvb_spi->ts_buf,
> + info.pkt_num * 188);
> + start = ktime_get();
> + } else {
> + usleep_range(10000, 11000);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int cxd2880_start_feed(struct dvb_demux_feed *feed)
> +{
> + int ret = 0;
> + int i = 0;
> + struct dvb_demux *demux = NULL;
> + struct cxd2880_dvb_spi *dvb_spi = NULL;
> +
> + if (!feed) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + demux = feed->demux;
> + if (!demux) {
> + pr_err("feed->demux is NULL\n");
> + return -EINVAL;
> + }
> + dvb_spi = demux->priv;
> +
> + if (dvb_spi->feed_count == CXD2880_MAX_FILTER_SIZE) {
> + pr_err("Exceeded maximum PID count (32).");
> + pr_err("Selected PID cannot be enabled.\n");
> + return -EINVAL;
> + }
> +
> + if (feed->pid == 0x2000) {
> + if (dvb_spi->all_pid_feed_count == 0) {
> + ret = cxd2880_update_pid_filter(dvb_spi,
> + &dvb_spi->filter_config,
> + true);
> + if (ret) {
> + pr_err("update pid filter failed\n");
> + return ret;
> + }
> + }
> + dvb_spi->all_pid_feed_count++;
> +
> + pr_debug("all PID feed (count = %d)\n",
> + dvb_spi->all_pid_feed_count);
> + } else {
> + struct cxd2880_pid_filter_config cfgtmp;
> +
> + cfgtmp = dvb_spi->filter_config;
> +
> + for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) {
> + if (cfgtmp.pid_config[i].is_enable == 0) {
> + cfgtmp.pid_config[i].is_enable = 1;
> + cfgtmp.pid_config[i].pid = feed->pid;
> + pr_debug("store PID %d to #%d\n",
> + feed->pid, i);
> + break;
> + }
> + }
> + if (i == CXD2880_MAX_FILTER_SIZE) {
> + pr_err("PID filter is full. Assumed bug.\n");

"Assumed bug"? What do you mean?

If the hardware filters are full, it is likely an userspace problem,
not a Kernel bug.

> + return -EINVAL;
> + }
> + if (!dvb_spi->all_pid_feed_count)
> + ret = cxd2880_update_pid_filter(dvb_spi,
> + &cfgtmp,
> + false);
> + if (ret)
> + return ret;
> +
> + dvb_spi->filter_config = cfgtmp;
> + }
> +
> + if (dvb_spi->feed_count == 0) {
> + dvb_spi->ts_buf =
> + kmalloc(MAX_TRANS_PKT * 188,
> + GFP_KERNEL | GFP_DMA);

> + if (!dvb_spi->ts_buf) {
> + pr_err("ts buffer allocate failed\n");
> + memset(&dvb_spi->filter_config, 0,
> + sizeof(dvb_spi->filter_config));
> + dvb_spi->all_pid_feed_count = 0;
> + return -ENOMEM;
> + }
> + dvb_spi->cxd2880_ts_read_thread = kthread_run(cxd2880_ts_read,
> + dvb_spi,
> + "cxd2880_ts_read");
> + if (IS_ERR(dvb_spi->cxd2880_ts_read_thread)) {
> + pr_err("kthread_run failed/\n");
> + kfree(dvb_spi->ts_buf);
> + dvb_spi->ts_buf = NULL;
> + memset(&dvb_spi->filter_config, 0,
> + sizeof(dvb_spi->filter_config));
> + dvb_spi->all_pid_feed_count = 0;
> + return PTR_ERR(dvb_spi->cxd2880_ts_read_thread);
> + }
> + }
> +
> + dvb_spi->feed_count++;
> +
> + pr_debug("start feed (count %d)\n", dvb_spi->feed_count);
> + return 0;
> +}
> +
> +static int cxd2880_stop_feed(struct dvb_demux_feed *feed)
> +{
> + int i = 0;
> + int ret;
> + struct dvb_demux *demux = NULL;
> + struct cxd2880_dvb_spi *dvb_spi = NULL;
> +
> + if (!feed) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + demux = feed->demux;
> + if (!demux) {
> + pr_err("feed->demux is NULL\n");
> + return -EINVAL;
> + }
> + dvb_spi = demux->priv;
> +
> + if (!dvb_spi->feed_count) {
> + pr_err("no feed is started\n");
> + return -EINVAL;
> + }
> +
> + if (feed->pid == 0x2000) {
> + /*
> + * Special PID case.
> + * Number of 0x2000 feed request was stored
> + * in dvb_spi->all_pid_feed_count.
> + */
> + if (dvb_spi->all_pid_feed_count <= 0) {
> + pr_err("PID %d not found.\n", feed->pid);
> + return -EINVAL;
> + }
> + dvb_spi->all_pid_feed_count--;
> + } else {
> + struct cxd2880_pid_filter_config cfgtmp;
> +
> + cfgtmp = dvb_spi->filter_config;
> +
> + for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) {
> + if (feed->pid == cfgtmp.pid_config[i].pid &&
> + cfgtmp.pid_config[i].is_enable != 0) {
> + cfgtmp.pid_config[i].is_enable = 0;
> + cfgtmp.pid_config[i].pid = 0;
> + pr_debug("removed PID %d from #%d\n",
> + feed->pid, i);
> + break;
> + }
> + }
> + dvb_spi->filter_config = cfgtmp;
> +
> + if (i == CXD2880_MAX_FILTER_SIZE) {
> + pr_err("PID %d not found\n", feed->pid);
> + return -EINVAL;
> + }
> + }
> +
> + ret = cxd2880_update_pid_filter(dvb_spi,
> + &dvb_spi->filter_config,
> + dvb_spi->all_pid_feed_count > 0);
> + dvb_spi->feed_count--;
> +
> + if (dvb_spi->feed_count == 0) {
> + int ret_stop = 0;
> +
> + ret_stop = kthread_stop(dvb_spi->cxd2880_ts_read_thread);
> + if (ret_stop) {
> + pr_err("'kthread_stop failed. (%d)\n", ret_stop);
> + ret = ret_stop;
> + }
> + kfree(dvb_spi->ts_buf);
> + dvb_spi->ts_buf = NULL;
> + }
> +
> + pr_debug("stop feed ok.(count %d)\n", dvb_spi->feed_count);
> +
> + return ret;
> +}
> +
> +static const struct of_device_id cxd2880_spi_of_match[] = {
> + { .compatible = "sony,cxd2880" },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, cxd2880_spi_of_match);
> +
> +static int
> +cxd2880_spi_probe(struct spi_device *spi)
> +{
> + int ret;
> + struct cxd2880_dvb_spi *dvb_spi = NULL;
> + struct cxd2880_config config;
> +
> + if (!spi) {
> + pr_err("invalid arg.\n");
> + return -EINVAL;
> + }
> +
> + dvb_spi = kzalloc(sizeof(struct cxd2880_dvb_spi), GFP_KERNEL);
> + if (!dvb_spi)
> + return -ENOMEM;
> +
> + dvb_spi->spi = spi;
> + mutex_init(&dvb_spi->spi_mutex);
> + dev_set_drvdata(&spi->dev, dvb_spi);
> + config.spi = spi;
> + config.spi_mutex = &dvb_spi->spi_mutex;
> +
> + ret = dvb_register_adapter(&dvb_spi->adapter,
> + "CXD2880",
> + THIS_MODULE,
> + &spi->dev,
> + adapter_nr);
> + if (ret < 0) {
> + pr_err("dvb_register_adapter() failed\n");
> + goto fail_adapter;
> + }
> +
> + if (!dvb_attach(cxd2880_attach, &dvb_spi->dvb_fe, &config)) {
> + pr_err("cxd2880_attach failed\n");
> + goto fail_attach;
> + }
> +
> + ret = dvb_register_frontend(&dvb_spi->adapter,
> + &dvb_spi->dvb_fe);
> + if (ret < 0) {
> + pr_err("dvb_register_frontend() failed\n");
> + goto fail_frontend;
> + }
> +
> + dvb_spi->demux.dmx.capabilities = DMX_TS_FILTERING;
> + dvb_spi->demux.priv = dvb_spi;
> + dvb_spi->demux.filternum = CXD2880_MAX_FILTER_SIZE;
> + dvb_spi->demux.feednum = CXD2880_MAX_FILTER_SIZE;
> + dvb_spi->demux.start_feed = cxd2880_start_feed;
> + dvb_spi->demux.stop_feed = cxd2880_stop_feed;
> +
> + ret = dvb_dmx_init(&dvb_spi->demux);
> + if (ret < 0) {
> + pr_err("dvb_dmx_init() failed\n");
> + goto fail_dmx;
> + }
> +
> + dvb_spi->dmxdev.filternum = CXD2880_MAX_FILTER_SIZE;
> + dvb_spi->dmxdev.demux = &dvb_spi->demux.dmx;
> + dvb_spi->dmxdev.capabilities = 0;
> + ret = dvb_dmxdev_init(&dvb_spi->dmxdev,
> + &dvb_spi->adapter);
> + if (ret < 0) {
> + pr_err("dvb_dmxdev_init() failed\n");
> + goto fail_dmxdev;
> + }
> +
> + dvb_spi->dmx_fe.source = DMX_FRONTEND_0;
> + ret = dvb_spi->demux.dmx.add_frontend(&dvb_spi->demux.dmx,
> + &dvb_spi->dmx_fe);
> + if (ret < 0) {
> + pr_err("add_frontend() failed\n");
> + goto fail_dmx_fe;
> + }
> +
> + ret = dvb_spi->demux.dmx.connect_frontend(&dvb_spi->demux.dmx,
> + &dvb_spi->dmx_fe);
> + if (ret < 0) {
> + pr_err("dvb_register_frontend() failed\n");
> + goto fail_fe_conn;
> + }
> +
> + pr_info("Sony CXD2880 has successfully attached.\n");
> +
> + return 0;
> +
> +fail_fe_conn:
> + dvb_spi->demux.dmx.remove_frontend(&dvb_spi->demux.dmx,
> + &dvb_spi->dmx_fe);
> +fail_dmx_fe:
> + dvb_dmxdev_release(&dvb_spi->dmxdev);
> +fail_dmxdev:
> + dvb_dmx_release(&dvb_spi->demux);
> +fail_dmx:
> + dvb_unregister_frontend(&dvb_spi->dvb_fe);
> +fail_frontend:
> + dvb_frontend_detach(&dvb_spi->dvb_fe);
> +fail_attach:
> + dvb_unregister_adapter(&dvb_spi->adapter);
> +fail_adapter:
> + kfree(dvb_spi);
> + return ret;
> +}
> +
> +static int
> +cxd2880_spi_remove(struct spi_device *spi)
> +{
> + struct cxd2880_dvb_spi *dvb_spi;
> +
> + if (!spi) {
> + pr_err("invalid arg\n");
> + return -EINVAL;
> + }
> +
> + dvb_spi = dev_get_drvdata(&spi->dev);
> +
> + if (!dvb_spi) {
> + pr_err("failed\n");
> + return -EINVAL;
> + }
> + dvb_spi->demux.dmx.remove_frontend(&dvb_spi->demux.dmx,
> + &dvb_spi->dmx_fe);
> + dvb_dmxdev_release(&dvb_spi->dmxdev);
> + dvb_dmx_release(&dvb_spi->demux);
> + dvb_unregister_frontend(&dvb_spi->dvb_fe);
> + dvb_frontend_detach(&dvb_spi->dvb_fe);
> + dvb_unregister_adapter(&dvb_spi->adapter);
> +
> + kfree(dvb_spi);
> + pr_info("cxd2880_spi remove ok.\n");
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id cxd2880_spi_id[] = {
> + { "cxd2880", 0 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(spi, cxd2880_spi_id);
> +
> +static struct spi_driver cxd2880_spi_driver = {
> + .driver = {
> + .name = "cxd2880",
> + .of_match_table = cxd2880_spi_of_match,
> + },
> + .id_table = cxd2880_spi_id,
> + .probe = cxd2880_spi_probe,
> + .remove = cxd2880_spi_remove,
> +};
> +module_spi_driver(cxd2880_spi_driver);
> +
> +MODULE_DESCRIPTION("Sony CXD2880 DVB-T2/T tuner + demod driver SPI adapter");
> +MODULE_AUTHOR("Sony Semiconductor Solutions Corporation");
> +MODULE_LICENSE("GPL v2");



Thanks,
Mauro

\
 
 \ /
  Last update: 2018-03-07 11:16    [W:0.116 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site