lkml.org 
[lkml]   [2018]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3] dt-bindings: clock: Add bindings for ZynqMP clock driver
Date
Hi Rob,


> -----Original Message-----
> From: Rob Herring [mailto:robh@kernel.org]
> Sent: Monday, March 05, 2018 5:46 PM
> To: Jolly Shah <JOLLYS@xilinx.com>
> Cc: mturquette@baylibre.com; sboyd@codeaurora.org;
> michal.simek@xilinx.com; mark.rutland@arm.com; linux-clk@vger.kernel.org;
> devicetree@vger.kernel.org; Shubhrajyoti Datta <shubhraj@xilinx.com>; linux-
> kernel@vger.kernel.org; Jolly Shah <JOLLYS@xilinx.com>; Rajan Vaja
> <RAJANV@xilinx.com>; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH 2/3] dt-bindings: clock: Add bindings for ZynqMP clock
> driver
>
> On Wed, Feb 28, 2018 at 02:27:40PM -0800, Jolly Shah wrote:
> > Add documentation to describe Xilinx ZynqMP clock driver bindings.
> >
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> > ---
> > .../devicetree/bindings/clock/xlnx,zynqmp-clk.txt | 163
> > +++++++++++++++++++++
> > 1 file changed, 163 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
> > b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
> > new file mode 100644
> > index 0000000..d590330
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
> > @@ -0,0 +1,163 @@
> > +Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC
> > +
> > +The Zynq Ultrascale+ MPSoC has several different clk providers, each
> > +with there own bindings.
> > +The purpose of this document is to document their usage.
> > +
> > +See clock_bindings.txt for more information on the generic clock bindings.
> > +
> > +== Clock Controller ==
> > +The clock controller is a logical abstraction of Zynq Ultrascale+
> > +MPSoC clock tree. It reads required input clock frequencies from the
> > +devicetree and acts as clock provider for all clock consumers of PS clocks.
>
> Umm, the clock controller should correspond to a h/w block, not a "logical
> abstraction of the clock tree".
>

Will correct description in next version.

> > +
> > +Required properties:
> > + - #clock-cells : Must be 1
> > + - compatible : "xlnx,zynqmp-clk"
> > + - clocks : list of clock specifiers which are external input clocks to the
> > + given clock controller. Please refer the next section to find
> > + the input clocks for a given controller.
> > + - clock-names : list of names of clocks which are exteral input clocks to the
> > + given clock controller. Please refer to the clock bindings
> > + for more details
> > +
> > +Input clocks for zynqmp Ultrascale+ clock controller:
> > +The Zynq UltraScale+ MPSoC has one primary and four alternative
> > +reference clock inputs.
> > +These required clock inputs are the
> > + - pss_ref_clk (PS reference clock)
> > + - video_clk (reference clock for video system )
> > + - pss_alt_ref_clk (alternative PS reference clock)
> > + - aux_ref_clk
> > + - gt_crx_ref_clk (transceiver reference clock)
> > +
> > +The following strings are optional parameters to the 'clock-names'
> > +property in order to provide an optional (E)MIO clock source.
> > + - swdt0_ext_clk
> > + - swdt1_ext_clk
> > + - gem0_emio_clk
> > + - gem1_emio_clk
> > + - gem2_emio_clk
> > + - gem3_emio_clk
> > + - mio_clk_XX # with XX = 00..77
> > + - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
> > +
> > +
> > +Output clocks for zynqmp Ultrascale+ clock controller:
> > +Output clocks are registered based on clock information received from
> firmware.
> > +Output clock indexes are mentioned below:
> > +
> > +Clock ID: Output clock name:
> > +-------------------------------------
>
> These go in header definition, not here.

Sure. Will move them.

>
> > +0 iopll
> > +1 rpll
> > +2 apll
> > +3 dpll
> > +4 vpll
> > +5 iopll_to_fpd
> > +6 rpll_to_fpd
> > +7 apll_to_lpd
> > +8 dpll_to_lpd
> > +9 vpll_to_lpd
> > +10 acpu
> > +11 acpu_half
> > +12 dbf_fpd
> > +13 dbf_lpd
> > +14 dbg_trace
> > +15 dbg_tstmp
> > +16 dp_video_ref
> > +17 dp_audio_ref
> > +18 dp_stc_ref
> > +19 gdma_ref
> > +20 dpdma_ref
> > +21 ddr_ref
> > +22 sata_ref
> > +23 pcie_ref
> > +24 gpu_ref
> > +25 gpu_pp0_ref
> > +26 gpu_pp1_ref
> > +27 topsw_main
> > +28 topsw_lsbus
> > +29 gtgref0_ref
> > +30 lpd_switch
> > +31 lpd_lsbus
> > +32 usb0_bus_ref
> > +33 usb1_bus_ref
> > +34 usb3_dual_ref
> > +35 usb0
> > +36 usb1
> > +37 cpu_r5
> > +38 cpu_r5_core
> > +39 csu_spb
> > +40 csu_pll
> > +41 pcap
> > +42 iou_switch
> > +43 gem_tsu_ref
> > +44 gem_tsu
> > +45 gem0_ref
> > +46 gem1_ref
> > +47 gem2_ref
> > +48 gem3_ref
> > +49 gem0_tx
> > +50 gem1_tx
> > +51 gem2_tx
> > +52 gem3_tx
> > +53 qspi_ref
> > +54 sdio0_ref
> > +55 sdio1_ref
> > +56 uart0_ref
> > +57 uart1_ref
> > +58 spi0_ref
> > +59 spi1_ref
> > +60 nand_ref
> > +61 i2c0_ref
> > +62 i2c1_ref
> > +63 can0_ref
> > +64 can1_ref
> > +65 can0
> > +66 can1
> > +67 dll_ref
> > +68 adma_ref
> > +69 timestamp_ref
> > +70 ams_ref
> > +71 pl0_ref
> > +72 pl1_ref
> > +73 pl2_ref
> > +74 pl3_ref
> > +75 wdt
> > +76 iopll_int
> > +77 iopll_pre_src
> > +78 iopll_half
> > +79 iopll_int_mux
> > +80 iopll_post_src
> > +81 rpll_int
> > +82 rpll_pre_src
> > +83 rpll_half
> > +84 rpll_int_mux
> > +85 rpll_post_src
> > +86 apll_int
> > +87 apll_pre_src
> > +88 apll_half
> > +89 apll_int_mux
> > +90 apll_post_src
> > +91 dpll_int
> > +92 dpll_pre_src
> > +93 dpll_half
> > +94 dpll_int_mux
> > +95 dpll_post_src
> > +96 vpll_int
> > +97 vpll_pre_src
> > +98 vpll_half
> > +99 vpll_int_mux
> > +100 vpll_post_src
> > +101 can0_mio
> > +102 can1_mio
> > +
> > +Example:
> > +
> > +clk: clk {
> > + #clock-cells = <1>;
> > + compatible = "xlnx,zynqmp-clk";
>
> How do you control the clocks?

Clocks are controlled by a dedicated platform management controller. Above clock ids are used to identify clocks between master and PMU.

>
> > + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
> <&aux_ref_clk>, <&gt_crx_ref_clk>;
> > + clock-names = "pss_ref_clk", "video_clk",
> "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"
> > +};
> > --
> > 2.7.4
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2018-03-07 23:47    [W:0.079 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site