lkml.org 
[lkml]   [2018]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 2/4] drivers: firmware: xilinx: Add ZynqMP firmware driver
Date
Hi Sudeep,

Thanks for the review,

> -----Original Message-----
> From: Sudeep Holla [mailto:sudeep.holla@arm.com]
> Sent: Thursday, March 01, 2018 6:28 AM
> To: Jolly Shah <JOLLYS@xilinx.com>; michal.simek@xilinx.com
> Cc: ard.biesheuvel@linaro.org; mingo@kernel.org;
> gregkh@linuxfoundation.org; matt@codeblueprint.co.uk;
> hkallweit1@gmail.com; keescook@chromium.org;
> dmitry.torokhov@gmail.com; robh+dt@kernel.org; mark.rutland@arm.com;
> Sudeep Holla <sudeep.holla@arm.com>; Rajan Vaja <RAJANV@xilinx.com>;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; Jolly Shah <JOLLYS@xilinx.com>
> Subject: Re: [PATCH v5 2/4] drivers: firmware: xilinx: Add ZynqMP firmware
> driver
>
>
>
> On 20/02/18 19:21, Jolly Shah wrote:
> > This patch is adding communication layer with firmware.
> > Firmware driver provides an interface to firmware APIs.
> > Interface APIs can be used by any driver to communicate to
> > PMUFW(Platform Management Unit). All requests go through ATF.
> >
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> > ---
> > arch/arm64/Kconfig.platforms | 1 +
> > drivers/firmware/Kconfig | 1 +
> > drivers/firmware/Makefile | 1 +
> > drivers/firmware/xilinx/Kconfig | 4 +
> > drivers/firmware/xilinx/Makefile | 4 +
> > drivers/firmware/xilinx/zynqmp/Kconfig | 16 +
> > drivers/firmware/xilinx/zynqmp/Makefile | 4 +
> > drivers/firmware/xilinx/zynqmp/firmware.c | 1051
> +++++++++++++++++++++++
> > include/linux/firmware/xilinx/zynqmp/firmware.h | 590 +++++++++++++
> > 9 files changed, 1672 insertions(+)
> > create mode 100644 drivers/firmware/xilinx/Kconfig create mode
> > 100644 drivers/firmware/xilinx/Makefile create mode 100644
> > drivers/firmware/xilinx/zynqmp/Kconfig
> > create mode 100644 drivers/firmware/xilinx/zynqmp/Makefile
> > create mode 100644 drivers/firmware/xilinx/zynqmp/firmware.c
> > create mode 100644 include/linux/firmware/xilinx/zynqmp/firmware.h
> >
> > +
> > +/**
> > + * zynqmp_pm_force_powerdown - PM call to request for another PU or
> subsystem to
> > + * be powered down forcefully
> > + * @target: Node ID of the targeted PU or subsystem
> > + * @ack: Flag to specify whether acknowledge is requested
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_force_powerdown(const u32 target,
> > + const enum zynqmp_pm_request_ack ack) {
> > + return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, target, ack,
> 0, 0,
> > +NULL); }
> > +
>
> [...]
>
> > +/**
> > + * zynqmp_pm_system_shutdown - PM call to request a system shutdown or
> restart
> > + * @type: Shutdown or restart? 0 for shutdown, 1 for restart
> > + * @subtype: Specifies which system should be restarted or shut down
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_system_shutdown(const u32 type, const u32
> > +subtype) {
> > + return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, type, subtype,
> > + 0, 0, NULL);
> > +}
> > +
>
> I can't understand why you need above 2 APIs: PM_FORCE_POWERDOWN and
> PM_SYSTEM_SHUTDOWN. You should use PSCI_SYSTEM_OFF and
> PSCI_SYSTEM_RESET and drop these two.
>

FORCE_POWERDOWN allows remote master to force power off other node/domain.
SYSTEM_SHUTDOWN provides interface to shutdown/restart the subsystem. It supports system/subsystem restart with argument value. PSCI doesn’t support argument to identify between restart types.

>
> > +static const struct zynqmp_eemi_ops eemi_ops = {
> > + .get_api_version = zynqmp_pm_get_api_version,
> > + .get_chipid = zynqmp_pm_get_chipid,
> > + .reset_assert = zynqmp_pm_reset_assert,
> > + .reset_get_status = zynqmp_pm_reset_get_status,
> > + .fpga_load = zynqmp_pm_fpga_load,
> > + .fpga_get_status = zynqmp_pm_fpga_get_status,
> > + .sha_hash = zynqmp_pm_sha_hash,
> > + .rsa = zynqmp_pm_rsa,
> > + .request_suspend = zynqmp_pm_request_suspend,
> > + .force_powerdown = zynqmp_pm_force_powerdown,
> > + .request_wakeup = zynqmp_pm_request_wakeup,
> > + .set_wakeup_source = zynqmp_pm_set_wakeup_source,
> > + .system_shutdown = zynqmp_pm_system_shutdown,
> > + .request_node = zynqmp_pm_request_node,
> > + .release_node = zynqmp_pm_release_node,
> > + .set_requirement = zynqmp_pm_set_requirement,
> > + .set_max_latency = zynqmp_pm_set_max_latency,
> > + .set_configuration = zynqmp_pm_set_configuration,
> > + .get_node_status = zynqmp_pm_get_node_status,
> > + .get_operating_characteristic =
> zynqmp_pm_get_operating_characteristic,
> > + .init_finalize = zynqmp_pm_init_finalize,
> > + .set_suspend_mode = zynqmp_pm_set_suspend_mode,
> > + .ioctl = zynqmp_pm_ioctl,
> > + .query_data = zynqmp_pm_query_data,
> > + .pinctrl_request = zynqmp_pm_pinctrl_request,
> > + .pinctrl_release = zynqmp_pm_pinctrl_release,
> > + .pinctrl_get_function = zynqmp_pm_pinctrl_get_function,
> > + .pinctrl_set_function = zynqmp_pm_pinctrl_set_function,
> > + .pinctrl_get_config = zynqmp_pm_pinctrl_get_config,
> > + .pinctrl_set_config = zynqmp_pm_pinctrl_set_config,
> > + .clock_enable = zynqmp_pm_clock_enable,
> > + .clock_disable = zynqmp_pm_clock_disable,
> > + .clock_getstate = zynqmp_pm_clock_getstate,
> > + .clock_setdivider = zynqmp_pm_clock_setdivider,
> > + .clock_getdivider = zynqmp_pm_clock_getdivider,
> > + .clock_setrate = zynqmp_pm_clock_setrate,
> > + .clock_getrate = zynqmp_pm_clock_getrate,
> > + .clock_setparent = zynqmp_pm_clock_setparent,
> > + .clock_getparent = zynqmp_pm_clock_getparent, };
> > +
> Instead of introducing all these in oneshot, add them as you have users of it.
> IOW, show the users of these functions in the series. Also I asked to split this
> into functional changes like clock, pinctrl, power, etc.

It can be split into functional changes in same series but it will be difficult to split between users as there are more than 10 driver users for different EEMI APIs and also multiple driver users using specifc EEMI APIs. They all can't be submitted as single series.

>
> --
> Regards,
> Sudeep
\
 
 \ /
  Last update: 2018-03-07 01:45    [W:0.105 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site