lkml.org 
[lkml]   [2018]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v3 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
Date
Quoting Lina Iyer (2018-03-02 08:43:08)
> Add controller driver for QCOM SoCs that have hardware based shared
> resource management. The hardware IP known as RSC (Resource State
> Coordinator) houses multiple Direct Resource Voter (DRV) for different
> execution levels. A DRV is a unique voter on the state of a shared
> resource. A Trigger Control Set (TCS) is a bunch of slots that can house
> multiple resource state requests, that when triggered will issue those
> requests through an internal bus to the Resource Power Manager Hardened
> (RPMH) blocks. These hardware blocks are capable of adjusting clocks,
> voltages etc. The resource state request from a DRV are aggregated along

s/voltages etc/voltages, etc/

> with state requests from other processors in the SoC and the aggregate
> value is applied on the resource.
>
> Some important aspects of the RPMH communication -
> - Requests are <addr, value> with some header information
> - Multiple requests (upto 16) may be sent through a TCS, at a time
> - Requests in a TCS are sent in sequence
> - Requests may be fire-n-forget or completion (response expected)
> - Multiple TCS from the same DRV may be triggered simultaneously
> - Cannot send a request if another reques for the same addr is in

s/reques /request/ ?

> progress from the same DRV
> - When all the requests from a TCS are complete, an IRQ is raised
> - The IRQ handler needs to clear the TCS before it is available for
> reuse
> - TCS configuration is specific to a DRV
> - Platform drivers may use DRV from different RSCs to make requests
>
> Resource state requests made when CPUs are active are called 'active'
> state requests. Requests made when all the CPUs are powered down (idle
> state) are called 'sleep' state requests. They are matched by a
> corresponding 'wake' state requests which puts the resources back in to
> previously requested active state before resuming any CPU. TCSes are
> dedicated for each type of requests. Control TCS are used to provide
> specific information to the controller.
>
> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
> ---
> drivers/soc/qcom/Kconfig | 10 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/rpmh-internal.h | 87 +++++
> drivers/soc/qcom/rpmh-rsc.c | 593 ++++++++++++++++++++++++++++++++
> include/dt-bindings/soc/qcom,rpmh-rsc.h | 14 +
> include/soc/qcom/tcs.h | 56 +++
> 6 files changed, 761 insertions(+)
> create mode 100644 drivers/soc/qcom/rpmh-internal.h
> create mode 100644 drivers/soc/qcom/rpmh-rsc.c
> create mode 100644 include/dt-bindings/soc/qcom,rpmh-rsc.h
> create mode 100644 include/soc/qcom/tcs.h
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index e050eb83341d..779f0d14748d 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -55,6 +55,16 @@ config QCOM_RMTFS_MEM
>
> Say y here if you intend to boot the modem remoteproc.
>
> +config QCOM_RPMH
> + bool "Qualcomm RPM-Hardened (RPMH) Communication"

No module?

> + depends on ARCH_QCOM && ARM64 && OF

Add support for compile test?

> + help
> + Support for communication with the hardened-RPM blocks in
> + Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
> + internal bus to transmit state requests for shared resources. A set
> + of hardware components aggregate requests for these resources and
> + help apply the aggregated state on the resource.
> +
> config QCOM_SMEM
> tristate "Qualcomm Shared Memory Manager (SMEM)"
> depends on ARCH_QCOM
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index dcebf2814e6d..e7d04f0e3616 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -12,3 +12,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_RPMH) += rpmh-rsc.o

Keep alphabetically sorted?

> diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
> new file mode 100644
> index 000000000000..12faec77c4f3
> --- /dev/null
> +++ b/drivers/soc/qcom/rpmh-internal.h
> @@ -0,0 +1,87 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> + */
> +
> +
> +#ifndef __RPM_INTERNAL_H__
> +#define __RPM_INTERNAL_H__
> +
> +#include <soc/qcom/tcs.h>
> +
> +#define TCS_TYPE_NR 4
> +#define MAX_CMDS_PER_TCS 16
> +#define MAX_TCS_PER_TYPE 3
> +#define MAX_TCS_NR (MAX_TCS_PER_TYPE * TCS_TYPE_NR)
> +
> +struct rsc_drv;
> +
> +/**
> + * tcs_response: Response object for a request

struct tcs_response -

> + *
> + * @drv: the controller
> + * @msg: the request for this response
> + * @m: the tcs identifier
> + * @err: error reported in the response
> + * @list: link list object.

What is it linked to? Also drop full-stop please.

> + */
> +struct tcs_response {
> + struct rsc_drv *drv;
> + struct tcs_request *msg;
> + u32 m;
> + int err;
> + struct list_head list;
> +};
> +
> +/**
> + * tcs_group: group of Trigger Command Sets for a request state
> + *
> + * @drv: the controller
> + * @type: type of the TCS in this group - active, sleep, wake
> + * @tcs_mask: mask of the TCSes relative to all the TCSes in the RSC
> + * @tcs_offset: start of the TCS group relative to the TCSes in the RSC
> + * @num_tcs: number of TCSes in this type
> + * @ncpt: number of commands in each TCS
> + * @tcs_lock: lock for synchronizing this TCS writes
> + * @responses: response objects for requests sent from each TCS
> + */
> +struct tcs_group {
> + struct rsc_drv *drv;
> + int type;
> + u32 tcs_mask;
> + u32 tcs_offset;

Maybe just mask? and offset? tcs is already in the struct name.

> + int num_tcs;
> + int ncpt;

num_cmd_per_tcs? It doesn't actually look to be used though.

> + spinlock_t tcs_lock;
> + struct tcs_response *responses[MAX_TCS_PER_TYPE];

const perhaps? Doubtful that responses would be changed after they're
filled in.

> +};
> +
> +/**
> + * rsc_drv: the Resource State Coordinator controller
> + *
> + * @name: controller identifier
> + * @tcs_base: start address of the TCS registers in this controller
> + * @drv_id: instance id in the controller (Direct Resource Voter)

just 'id'? 'drv' is already in the name of the struct.

> + * @num_tcs: number of TCSes in this DRV
> + * @tasklet: handle responses, off-load work from IRQ handler
> + * @response_pending: list of responses that needs to be sent to caller
> + * @tcs: TCS groups
> + * @tcs_in_use: s/w state of the TCS
> + * @drv_lock: synchronize state of the controller
> + */
> +struct rsc_drv {
> + const char *name;
> + void __iomem *tcs_base;
> + int drv_id;
> + int num_tcs;
> + struct tasklet_struct tasklet;
> + struct list_head response_pending;
> + struct tcs_group tcs[TCS_TYPE_NR];
> + atomic_t tcs_in_use[MAX_TCS_NR];

Why not a bitmap with atomic set on the bit?

> + spinlock_t drv_lock;
> +};
> +
> +
> +int rpmh_rsc_send_data(struct rsc_drv *drv, struct tcs_request *msg);

const msg?

> +
> +#endif /* __RPM_INTERNAL_H__ */
> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
> new file mode 100644
> index 000000000000..6cb91a0114ee
> --- /dev/null
> +++ b/drivers/soc/qcom/rpmh-rsc.c
> @@ -0,0 +1,593 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME
> +
> +#include <linux/atomic.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/module.h>

If the driver doesn't become tristate, this should become export.h
instead of module.h

> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#include <asm-generic/io.h>

No. Use <linux/io.h> instead.

> +#include <soc/qcom/tcs.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +#include "rpmh-internal.h"
> +
> +#define RSC_DRV_TCS_OFFSET 672
> +#define RSC_DRV_CMD_OFFSET 20
> +
> +/* DRV Configuration Information Register */
> +#define DRV_PRNT_CHLD_CONFIG 0x0C
> +#define DRV_NUM_TCS_MASK 0x3F
> +#define DRV_NUM_TCS_SHIFT 6
> +#define DRV_NCPT_MASK 0x1F
> +#define DRV_NCPT_SHIFT 27
> +
> +/* Register offsets */
> +#define RSC_DRV_IRQ_ENABLE 0x00
> +#define RSC_DRV_IRQ_STATUS 0x04
> +#define RSC_DRV_IRQ_CLEAR 0x08
> +#define RSC_DRV_CMD_WAIT_FOR_CMPL 0x10
> +#define RSC_DRV_CONTROL 0x14
> +#define RSC_DRV_STATUS 0x18
> +#define RSC_DRV_CMD_ENABLE 0x1C
> +#define RSC_DRV_CMD_MSGID 0x30
> +#define RSC_DRV_CMD_ADDR 0x34
> +#define RSC_DRV_CMD_DATA 0x38
> +#define RSC_DRV_CMD_STATUS 0x3C
> +#define RSC_DRV_CMD_RESP_DATA 0x40
> +
> +#define TCS_AMC_MODE_ENABLE BIT(16)
> +#define TCS_AMC_MODE_TRIGGER BIT(24)
> +
> +/* TCS CMD register bit mask */
> +#define CMD_MSGID_LEN 8
> +#define CMD_MSGID_RESP_REQ BIT(8)
> +#define CMD_MSGID_WRITE BIT(16)
> +#define CMD_STATUS_ISSUED BIT(8)
> +#define CMD_STATUS_COMPL BIT(16)
> +
> +static struct tcs_group *get_tcs_from_index(struct rsc_drv *drv, int m)
> +{
> + struct tcs_group *tcs = NULL;
> + int i;
> +
> + for (i = 0; i < drv->num_tcs; i++) {
> + tcs = &drv->tcs[i];
> + if (tcs->tcs_mask & BIT(m))
> + break;

return tcs?

> + }
> +
> + if (i == drv->num_tcs) {
> + WARN(1, "Incorrect TCS index %d", m);
> + tcs = NULL;
> + }

And then unconditional WARN and return NULL?

> +
> + return tcs;
> +}
> +
> +static struct tcs_response *setup_response(struct rsc_drv *drv,
> + struct tcs_request *msg, int m)
> +{
> + struct tcs_response *resp;
> + struct tcs_group *tcs;
> +
> + resp = kcalloc(1, sizeof(*resp), GFP_ATOMIC);

Why not kzalloc?

> + if (!resp)
> + return ERR_PTR(-ENOMEM);
> +
> + resp->drv = drv;
> + resp->msg = msg;
> + resp->err = 0;
> +
> + tcs = get_tcs_from_index(drv, m);
> + if (!tcs)
> + return ERR_PTR(-EINVAL);
> +
> + /*
> + * We should have been called from a TCS-type locked context, and
> + * we overwrite the previously saved response.
> + */

Add a spinlock assert on tcs_lock for this?

> + tcs->responses[m - tcs->tcs_offset] = resp;
> +
> + return resp;
> +}
> +
> +static void free_response(struct tcs_response *resp)
> +{
> + kfree(resp);
> +}
> +
> +static struct tcs_response *get_response(struct rsc_drv *drv, u32 m)
> +{
> + struct tcs_group *tcs = get_tcs_from_index(drv, m);
> +
> + return tcs->responses[m - tcs->tcs_offset];
> +}
> +
> +static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int m, int n)
> +{
> + return readl_relaxed(drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * m +
> + RSC_DRV_CMD_OFFSET * n);
> +}
> +
> +static void write_tcs_reg(struct rsc_drv *drv, int reg, int m, int n,
> + u32 data)
> +{
> + writel_relaxed(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * m +
> + RSC_DRV_CMD_OFFSET * n);
> +}
> +
> +static void write_tcs_reg_sync(struct rsc_drv *drv, int reg, int m, int n,
> + u32 data)
> +{
> + write_tcs_reg(drv, reg, m, n, data);
> + for (;;) {
> + if (data == read_tcs_reg(drv, reg, m, n))
> + break;
> + udelay(1);

Hopefully this never gets stuck. Add a timeout?

> + }
> +}
> +
> +static bool tcs_is_free(struct rsc_drv *drv, int m)
> +{
> + return !atomic_read(&drv->tcs_in_use[m]) &&
> + read_tcs_reg(drv, RSC_DRV_STATUS, m, 0);
> +}
> +
> +static struct tcs_group *get_tcs_of_type(struct rsc_drv *drv, int type)
> +{
> + int i;
> + struct tcs_group *tcs;
> +
> + for (i = 0; i < TCS_TYPE_NR; i++) {
> + if (type == drv->tcs[i].type)
> + break;
> + }
> +
> + if (i == TCS_TYPE_NR)
> + return ERR_PTR(-EINVAL);
> +
> + tcs = &drv->tcs[i];
> + if (!tcs->num_tcs)
> + return ERR_PTR(-EINVAL);
> +
> + return tcs;
> +}
> +
> +static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
> + struct tcs_request *msg)
> +{
> + int type;
> +
> + switch (msg->state) {
> + case RPMH_ACTIVE_ONLY_STATE:
> + type = ACTIVE_TCS;
> + break;
> + default:
> + return ERR_PTR(-EINVAL);
> + }
> +
> + return get_tcs_of_type(drv, type);
> +}
> +
> +static void send_tcs_response(struct tcs_response *resp)
> +{
> + struct rsc_drv *drv = resp->drv;
> + unsigned long flags;
> +
> + if (!resp)
> + return;

Impossible, resp was just dereferenced two lines above.

> +
> + spin_lock_irqsave(&drv->drv_lock, flags);
> + INIT_LIST_HEAD(&resp->list);
> + list_add_tail(&resp->list, &drv->response_pending);
> + spin_unlock_irqrestore(&drv->drv_lock, flags);
> +
> + tasklet_schedule(&drv->tasklet);
> +}
> +
> +/**
> + * tcs_irq_handler: TX Done interrupt handler
> + */
> +static irqreturn_t tcs_irq_handler(int irq, void *p)
> +{
> + struct rsc_drv *drv = p;
> + int m, i;
> + u32 irq_status, sts;
> + struct tcs_response *resp;
> + struct tcs_cmd *cmd;
> + int err;
> +
> + irq_status = read_tcs_reg(drv, RSC_DRV_IRQ_STATUS, 0, 0);
> +
> + for (m = 0; m < drv->num_tcs; m++) {
> + if (!(irq_status & (u32)BIT(m)))
> + continue;
> +
> + err = 0;
> + resp = get_response(drv, m);

resp->err = 0;

> + if (!resp) {
> + WARN_ON(1);

if (WARN_ON(!resp)) {

> + goto skip_resp;
> + }
> +
> + for (i = 0; i < resp->msg->num_payload; i++) {
> + cmd = &resp->msg->payload[i];
> + sts = read_tcs_reg(drv, RSC_DRV_CMD_STATUS, m, i);
> + if ((!(sts & CMD_STATUS_ISSUED)) ||
> + ((resp->msg->is_complete || cmd->complete) &&
> + (!(sts & CMD_STATUS_COMPL)))) {
> + err = -EIO;

resp->err = -EIO;

> + break;
> + }
> + }
> +
> + resp->err = err;

Drop.

> +skip_resp:
> + /* Reclaim the TCS */
> + write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, m, 0, 0);
> + write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, 0, BIT(m));
> + atomic_set(&drv->tcs_in_use[m], 0);
> + send_tcs_response(resp);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * tcs_notify_tx_done: TX Done for requests that got a response
> + *
> + * @data: the tasklet argument
> + *
> + * Tasklet function to notify MBOX that we are done with the request.
> + * Handles all pending reponses whenever run.
> + */
> +static void tcs_notify_tx_done(unsigned long data)
> +{
> + struct rsc_drv *drv = (struct rsc_drv *)data;
> + struct tcs_response *resp;
> + unsigned long flags;
> +
> + for (;;) {
> + spin_lock_irqsave(&drv->drv_lock, flags);
> + if (list_empty(&drv->response_pending)) {
> + spin_unlock_irqrestore(&drv->drv_lock, flags);
> + break;
> + }
> + resp = list_first_entry(&drv->response_pending,
> + struct tcs_response, list);

Maybe this could just be:

spin_lock_irqsave(&drv->drv_lock, flags);
resp = list_first_entry_or_null(&drv->response_pending,
struct tcs_response, list);
if (!resp) {
spin_unlock_irqrestore(&drv->drv_lock, flags);
break;
}

> + list_del(&resp->list);
> + spin_unlock_irqrestore(&drv->drv_lock, flags);
> + free_response(resp);

But all this function does is free the structure? Will it do more later?

> + }
> +}
> +
> +static void __tcs_buffer_write(struct rsc_drv *drv, int m, int n,
> + struct tcs_request *msg)
> +{
> + u32 msgid, cmd_msgid = 0;

Drop assignment to 0.

> + u32 cmd_enable = 0;
> + u32 cmd_complete;
> + struct tcs_cmd *cmd;
> + int i, j;
> +
> + cmd_msgid = CMD_MSGID_LEN;
> + cmd_msgid |= (msg->is_complete) ? CMD_MSGID_RESP_REQ : 0;

Drop useless parenthesis.

> + cmd_msgid |= CMD_MSGID_WRITE;
> +
> + cmd_complete = read_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, m, 0);
> +
> + for (i = 0, j = n; i < msg->num_payload; i++, j++) {
> + cmd = &msg->payload[i];
> + cmd_enable |= BIT(j);
> + cmd_complete |= cmd->complete << j;
> + msgid = cmd_msgid;
> + msgid |= (cmd->complete) ? CMD_MSGID_RESP_REQ : 0;

Drop useless parenthesis.

> + write_tcs_reg(drv, RSC_DRV_CMD_MSGID, m, j, msgid);
> + write_tcs_reg(drv, RSC_DRV_CMD_ADDR, m, j, cmd->addr);
> + write_tcs_reg(drv, RSC_DRV_CMD_DATA, m, j, cmd->data);
> + }
> +
> + write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, m, 0, cmd_complete);
> + cmd_enable |= read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, m, 0);
> + write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, m, 0, cmd_enable);
> +}
> +
> +static void __tcs_trigger(struct rsc_drv *drv, int m)
> +{
> + u32 enable;
> +
> + /*
> + * HW req: Clear the DRV_CONTROL and enable TCS again
> + * While clearing ensure that the AMC mode trigger is cleared
> + * and then the mode enable is cleared.
> + */
> + enable = read_tcs_reg(drv, RSC_DRV_CONTROL, m, 0);
> + enable &= ~TCS_AMC_MODE_TRIGGER;
> + write_tcs_reg_sync(drv, RSC_DRV_CONTROL, m, 0, enable);
> + enable &= ~TCS_AMC_MODE_ENABLE;
> + write_tcs_reg_sync(drv, RSC_DRV_CONTROL, m, 0, enable);
> +
> + /* Enable the AMC mode on the TCS and then trigger the TCS */
> + enable = TCS_AMC_MODE_ENABLE;
> + write_tcs_reg_sync(drv, RSC_DRV_CONTROL, m, 0, enable);
> + enable |= TCS_AMC_MODE_TRIGGER;
> + write_tcs_reg_sync(drv, RSC_DRV_CONTROL, m, 0, enable);
> +}
> +
> +static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
> + struct tcs_request *msg)
> +{
> + unsigned long curr_enabled;
> + u32 addr;
> + int i, j, k;
> + int m = tcs->tcs_offset;
> +
> + for (i = 0; i < tcs->num_tcs; i++, m++) {
> + if (tcs_is_free(drv, m))
> + continue;
> +
> + curr_enabled = read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, m, 0);
> +
> + for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) {
> + addr = read_tcs_reg(drv, RSC_DRV_CMD_ADDR, m, j);
> + for (k = 0; k < msg->num_payload; k++) {
> + if (addr == msg->payload[k].addr)
> + return -EBUSY;
> + }
> + }
> + }

There isn't any way to do this in software only? Hopefully this isn't
costly to read the TCS to see if something matches.

> +
> + return 0;
> +}
> +
> +static int find_free_tcs(struct tcs_group *tcs)
> +{
> + int m;
> +
> + for (m = 0; m < tcs->num_tcs; m++) {
> + if (tcs_is_free(tcs->drv, tcs->tcs_offset + m))
> + break;

return m?

> + }
> +
> + return (m != tcs->num_tcs) ? m : -EBUSY;

And then return -EBUSY otherwise?

> +}
> +
> +static int tcs_mbox_write(struct rsc_drv *drv, struct tcs_request *msg)
> +{
> + struct tcs_group *tcs;
> + int m;
> + struct tcs_response *resp = NULL;
> + unsigned long flags;
> + int ret = 0;

Drop assignment.

> +
> + tcs = get_tcs_for_msg(drv, msg);
> + if (IS_ERR(tcs))
> + return PTR_ERR(tcs);
> +
> + spin_lock_irqsave(&tcs->tcs_lock, flags);
> + m = find_free_tcs(tcs);
> + if (m < 0) {
> + ret = m;
> + goto done_write;
> + }
> +
> + /*
> + * The h/w does not like if we send a request to the same address,
> + * when one is already in-flight or bring processed.

s/bring/being/

> + */
> + ret = check_for_req_inflight(drv, tcs, msg);
> + if (ret)
> + goto done_write;
> +
> + resp = setup_response(drv, msg, m);
> + if (IS_ERR_OR_NULL(resp)) {

Looks to only return an error pointer on failure?

> + ret = PTR_ERR(resp);
> + goto done_write;
> + }
> + resp->m = m;
> +
> + atomic_set(&drv->tcs_in_use[m], 1);
> + __tcs_buffer_write(drv, m, 0, msg);
> + __tcs_trigger(drv, m);
> +
> +done_write:
> + spin_unlock_irqrestore(&tcs->tcs_lock, flags);
> + return ret;
> +}
> +
> +/**
> + * rpmh_rsc_send_data: Validate the incoming message and write to the
> + * appropriate TCS block.
> + *
> + * @drv: the controller
> + * @msg: the data to be sent
> + *
> + * Return: 0 on success, -EINVAL on error.
> + * Note: This call blocks until a valid data is written to the TCS.
> + */
> +int rpmh_rsc_send_data(struct rsc_drv *drv, struct tcs_request *msg)
> +{
> + int ret = 0;

Drop initial assignment.

> +
> + if (!msg || !msg->payload || !msg->num_payload ||
> + msg->num_payload > MAX_RPMH_PAYLOAD)
> + return -EINVAL;
> +
> + do {
> + ret = tcs_mbox_write(drv, msg);
> + if (ret == -EBUSY) {
> + pr_info_ratelimited("TCS Busy, retrying RPMH message send: addr=0x%x\n",

"addr=%#x\n"

> + msg->payload[0].addr);
> + udelay(10);
> + }
> + } while (ret == -EBUSY);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(rpmh_rsc_send_data);
> +
> +static int rpmh_probe_tcs_config(struct platform_device *pdev,
> + struct rsc_drv *drv)
> +{
> + struct tcs_type_config {
> + u32 type;
> + u32 n;
> + } tcs_cfg[TCS_TYPE_NR] = { { 0 } };
> + struct device_node *dn = pdev->dev.of_node;
> + u32 config, max_tcs, ncpt;
> + int i, ret, n, st = 0;
> + struct tcs_group *tcs;
> + struct resource *res;
> + void __iomem *base;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "drv");
> + if (!res)
> + return -EINVAL;
> +

Drop this return -EINVAL stuff and just call devm_ioremap_resource()
with the potentially NULL res in hand.

> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tcs");
> + if (!res)
> + return -EINVAL;
> +
> + drv->tcs_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drv->tcs_base))
> + return PTR_ERR(drv->tcs_base);
> +
> + config = readl_relaxed(base + DRV_PRNT_CHLD_CONFIG);
> +
> + max_tcs = config;
> + max_tcs &= (DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->drv_id));

Drop one useless parenthesis.

> + max_tcs = max_tcs >> (DRV_NUM_TCS_SHIFT * drv->drv_id);
> +
> + ncpt = config & (DRV_NCPT_MASK << DRV_NCPT_SHIFT);
> + ncpt = ncpt >> DRV_NCPT_SHIFT;
> +
> + n = of_property_count_elems_of_size(dn, "qcom,tcs-config",
> + sizeof(u32));

of_property_count_u32_elems()?

> + if (n != 2 * TCS_TYPE_NR)
> + return -EINVAL;
> +
> + for (i = 0; i < TCS_TYPE_NR; i++) {
> + ret = of_property_read_u32_index(dn, "qcom,tcs-config",
> + i * 2, &tcs_cfg[i].type);
> + if (ret)
> + return ret;
> + if (tcs_cfg[i].type >= TCS_TYPE_NR)
> + return -EINVAL;
> +
> + ret = of_property_read_u32_index(dn, "qcom,tcs-config",
> + i * 2 + 1, &tcs_cfg[i].n);
> + if (ret)
> + return ret;
> + if (tcs_cfg[i].n > MAX_TCS_PER_TYPE)
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < TCS_TYPE_NR; i++) {
> + tcs = &drv->tcs[tcs_cfg[i].type];
> + if (tcs->drv)
> + return -EINVAL;
> + tcs->drv = drv;
> + tcs->type = tcs_cfg[i].type;
> + tcs->num_tcs = tcs_cfg[i].n;
> + tcs->ncpt = ncpt;
> + spin_lock_init(&tcs->tcs_lock);
> +
> + if (!tcs->num_tcs || tcs->type == CONTROL_TCS)
> + continue;
> +
> + if (st + tcs->num_tcs > max_tcs ||
> + st + tcs->num_tcs >= 8 * sizeof(tcs->tcs_mask))

What is 8? BITS_PER_BYTE?

> + return -EINVAL;
> +
> + tcs->tcs_mask = ((1 << tcs->num_tcs) - 1) << st;
> + tcs->tcs_offset = st;
> + st += tcs->num_tcs;
> + }
> +
> + drv->num_tcs = st;
> +
> + return 0;
> +}
> +
> +static int rpmh_rsc_probe(struct platform_device *pdev)
> +{
> + struct device_node *dn = pdev->dev.of_node;
> + struct rsc_drv *drv;
> + int i, ret, irq;
> +
> + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
> + if (!drv)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32(dn, "qcom,drv-id", &drv->drv_id);
> + if (ret)
> + return ret;
> +
> + drv->name = of_get_property(pdev->dev.of_node, "label", NULL);
> + if (!drv->name)
> + drv->name = dev_name(&pdev->dev);
> +
> + ret = rpmh_probe_tcs_config(pdev, drv);
> + if (ret)
> + return ret;
> +
> + INIT_LIST_HEAD(&drv->response_pending);
> + spin_lock_init(&drv->drv_lock);
> + tasklet_init(&drv->tasklet, tcs_notify_tx_done, (unsigned long)drv);
> +
> + for (i = 0; i < ARRAY_SIZE(drv->tcs_in_use); i++)
> + atomic_set(&drv->tcs_in_use[i], 0);
> +
> + irq = of_irq_get(dn, 0);
> + if (irq < 0)
> + return irq;

This is a platform device, please use platform device APIs to get
resources like irqs.

> +
> + ret = devm_request_irq(&pdev->dev, irq, tcs_irq_handler,
> + IRQF_TRIGGER_HIGH | IRQF_NO_SUSPEND,
> + drv->name, drv);
> + if (ret)
> + return ret;
> +
> + /* Enable the active TCS to send requests immediately */
> + write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, 0,
> + drv->tcs[ACTIVE_TCS].tcs_mask);
> +
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);

devm_of_platform_populate()?

> +}
> +
> +static const struct of_device_id rpmh_drv_match[] = {
> + { .compatible = "qcom,rpmh-rsc", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, rpm_drv_match);
> +
> +static struct platform_driver rpmh_driver = {
> + .name = KBUILD_MODNAME,

Can you just put the name you want?

> + .of_match_table = rpmh_drv_match,
> + },
> +};
> +
> +static int __init rpmh_driver_init(void)
> +{
> + return platform_driver_register(&rpmh_driver);
> +}
> +arch_initcall(rpmh_driver_init);
> diff --git a/include/dt-bindings/soc/qcom,rpmh-rsc.h b/include/dt-bindings/soc/qcom,rpmh-rsc.h
> new file mode 100644
> index 000000000000..868f998ea998
> --- /dev/null
> +++ b/include/dt-bindings/soc/qcom,rpmh-rsc.h
> @@ -0,0 +1,14 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __DT_QCOM_RPMH_RSC_H__
> +#define __DT_QCOM_RPMH_RSC_H__
> +
> +#define SLEEP_TCS 0
> +#define WAKE_TCS 1
> +#define ACTIVE_TCS 2
> +#define CONTROL_TCS 3
> +
> +#endif /* __DT_QCOM_RPMH_RSC_H__ */
> diff --git a/include/soc/qcom/tcs.h b/include/soc/qcom/tcs.h
> new file mode 100644
> index 000000000000..9465f0560f7a
> --- /dev/null
> +++ b/include/soc/qcom/tcs.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __SOC_QCOM_TCS_H__
> +#define __SOC_QCOM_TCS_H__
> +
> +#define MAX_RPMH_PAYLOAD 16
> +
> +/**
> + * rpmh_state: state for the request
> + *
> + * RPMH_WAKE_ONLY_STATE: Resume resource state to the value previously
> + * requested before the processor was powered down.
> + * RPMH_SLEEP_STATE: State of the resource when the processor subsystem
> + * is powered down. There is no client using the
> + * resource actively.
> + * RPMH_ACTIVE_ONLY_STATE: Active or AMC mode requests. Resource state
> + * is aggregated immediately.
> + */
> +enum rpmh_state {
> + RPMH_SLEEP_STATE,
> + RPMH_WAKE_ONLY_STATE,
> + RPMH_ACTIVE_ONLY_STATE,
> +};
> +
> +/**
> + * tcs_cmd: an individual request to RPMH.
> + *
> + * @addr: the address of the resource slv_id:18:16 | offset:0:15
> + * @data: the resource state request
> + * @complete: wait for this request to be complete before sending the next
> + */
> +struct tcs_cmd {
> + u32 addr;
> + u32 data;
> + bool complete;
Maybe 'wait' instead of 'complete'?

> +};
> +
> +/**
> + * tcs_request: A set of tcs_cmds sent togther in a TCS

s/togther/together/

> + *
> + * @state: state for the request.

state for the request to apply to?

> + * @is_complete: expect a response from the h/w accelerator

is_complete sounds like we're going to read this variable? But this
looks to be more like 'wait' to indicate that we want to wait for
response if this bool is true? Rename to 'wait'?

> + * @num_payload: the number of tcs_cmds in thsi payload

s/thsi/this/

> + * @payload: an array of tcs_cmds
> + */
> +struct tcs_request {
> + enum rpmh_state state;
> + bool is_complete;
> + u32 num_payload;

num_cmds?

> + struct tcs_cmd *payload;

cmds?

> +};
> +
> +#endif /* __SOC_QCOM_TCS_H__ */

\
 
 \ /
  Last update: 2018-03-06 20:46    [W:3.308 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site