lkml.org 
[lkml]   [2018]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: usb: musb: "(null)" in sysfs mode file after disabling a gadget (and at other times, system hangs)
Merlijn,

On Fri, Mar 02, 2018 at 05:54:39PM +0100, Pali Rohár wrote:
> On Friday 02 March 2018 17:47:52 Merlijn Wajer wrote:
> > >> I would expect it to state "b_idle" instead of "(null)".
> > >
> > > Actually, I'd like to see (null) whenever a gadget driver is not loaded,
> > > which indicates a gadget is not bound to the udc.
> >
> > Hm... Sounds fine to me. I'm using this mode in combination with the usb
> > phy (vbus property) to detect if the phone is detect to a 'dumb' charger
> > of a PC, but I can just always have a gadget loaded -- same as before,
> > really.
>
> For detection if wallcharger or pc usb charger is connected, there is
> isp1704_charger driver. It uses some standard ULPI interface. It reports
> current_max and type (DCP - dedicated, CDP or just usb).

The musb udc driver sets the state to b_idle without checking a
gadget driver, this should be cleaned up. I have add this in my backlog.
But if this issue doesn't bother you much right now, I will make the
action low priority and address it later whenever I got time. (likely
not very soon, I have a hand full of musb driver bugs to fix...)

Regards,
-Bin.

\
 
 \ /
  Last update: 2018-03-05 20:29    [W:0.077 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site