lkml.org 
[lkml]   [2018]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option
    Date
    This board, as well as some other boards with i.MX6 and a PMIC, uses a
    "PMIC_STBY_REQ" line to notify the PMIC about a state change.
    The PMIC is programmed for a specific state change before triggering the
    line.
    In this case, PMIC_STBY_REQ can be used for stand by, sleep
    and power off modes.

    Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
    ---
    arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
    1 file changed, 5 insertions(+)

    diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
    index 23e108204e1e..c507532baed3 100644
    --- a/arch/arm/boot/dts/imx6dl-riotboard.dts
    +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
    @@ -90,6 +90,10 @@
    status = "okay";
    };

    +&clks {
    + fsl,pmic-stby-poweroff;
    +};
    +
    &fec {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_enet>;
    @@ -170,6 +174,7 @@
    reg = <0x08>;
    interrupt-parent = <&gpio5>;
    interrupts = <16 8>;
    + fsl,pmic-stby-poweroff;

    regulators {
    reg_vddcore: sw1ab { /* VDDARM_IN */
    --
    2.16.1
    \
     
     \ /
      Last update: 2018-03-05 11:25    [W:7.055 / U:0.100 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site