lkml.org 
[lkml]   [2018]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH 2/3] PCI: hv: serialize the present/eject work items
Date
> From: Michael Kelley (EOSG)
> Sent: Saturday, March 3, 2018 08:10
> > From: linux-kernel-owner@vger.kernel.org <linux-kernel-
> owner@vger.kernel.org> On Behalf Of Dexuan Cui
> > Sent: Friday, March 2, 2018 4:21 PM
> > When we hot-remove the device, we first receive a PCI_EJECT message and
> > then receive a PCI_BUS_RELATIONS message with bus_rel->device_count ==
> 0.
> >
> > The first message is offloaded to hv_eject_device_work(), and the second
> > is offloaded to pci_devices_present_work(). Both the paths can be running
> > list_del(&hpdev->list_entry), causing general protection fault, because
> > system_wq can run them concurrently.
> >
> > The patch eliminates the race condition.
>
> With this patch, the enum_sem field in struct hv_pcibus_device
> is no longer needed. The semaphore serializes execution in
> hv_pci_devices_present_work(), and that serialization is now done
> with the ordered workqueue. Also, the last paragraph of the top level
> comment for hv_pci_devices_present_work() should be updated to
> reflect the new ordering assumptions.

Thanks! I'll make an extra patch for this.

> Separately, an unrelated bug: At the top of hv_eject_device_work(),
> the first test may do a put_pcichild() and return. This exit path also
> needs to do put_hvpcibus() to balance the ref counts, or do a goto
> the last two lines at the bottom of the function.

When we're in hv_eject_device_work(), IMO hpdev->state must be
hv_pcichild_ejecting, so I'm going to make a patch like this:

@@ -1867,10 +1867,7 @@ static void hv_eject_device_work(struct work_struct *work)

hpdev = container_of(work, struct hv_pci_dev, wrk);

- if (hpdev->state != hv_pcichild_ejecting) {
- put_pcichild(hpdev, hv_pcidev_ref_pnp);
- return;
- }
+ WARN_ON(hpdev->state != hv_pcichild_ejecting);

/*
* Ejection can come before or after the PCI bus has been set up, so

> > @@ -1770,7 +1772,7 @@ static void hv_pci_devices_present(struct
> hv_pcibus_device *hbus,
> > spin_unlock_irqrestore(&hbus->device_list_lock, flags);
> >
> > get_hvpcibus(hbus);
> > - schedule_work(&dr_wrk->wrk);
> > + queue_work(hbus->wq, &dr_wrk->wrk);
>
> This invocation of get_hvpcibus() and queue_work() could be made
> conditional on whether the preceding list_add_tail() transitioned
> the list from empty to non-empty. If the list was already non-empty,
> a previously queued invocation of hv_pci_devices_present_work()
> will find the new entry and process it. But this is an
> optimization in a non-perf sensitive code path, so may not be
> worth it.

Exactly. I'll add the the optimization.

> > @@ -1848,7 +1850,7 @@ static void hv_pci_eject_device(struct hv_pci_dev
> *hpdev)
> > get_pcichild(hpdev, hv_pcidev_ref_pnp);
> > INIT_WORK(&hpdev->wrk, hv_eject_device_work);
> > get_hvpcibus(hpdev->hbus);
> > - schedule_work(&hpdev->wrk);
> > + queue_work(hpdev->hbus->wq, &hpdev->wrk);
> > }
> >
> > /**
> > @@ -2463,11 +2465,17 @@ static int hv_pci_probe(struct hv_device *hdev,
> > spin_lock_init(&hbus->retarget_msi_interrupt_lock);
> > sema_init(&hbus->enum_sem, 1);
> > init_completion(&hbus->remove_event);
> > + hbus->wq = alloc_ordered_workqueue("hv_pci_%x", 0,
> > + hbus->sysdata.domain);
> > + if (!hbus->wq) {
> > + ret = -ENOMEM;
> > + goto free_bus;
> > + }
> >
> > ret = vmbus_open(hdev->channel, pci_ring_size, pci_ring_size, NULL, 0,
> > hv_pci_onchannelcallback, hbus);
> > if (ret)
> > - goto free_bus;
> > + goto destroy_wq;
> >
> > hv_set_drvdata(hdev, hbus);
> >
> > @@ -2536,6 +2544,9 @@ static int hv_pci_probe(struct hv_device *hdev,
> > hv_free_config_window(hbus);
> > close:
> > vmbus_close(hdev->channel);
> > +destroy_wq:
> > + drain_workqueue(hbus->wq);
>
> The drain_workqueue() call isn't necessary. destroy_workqueue() calls
> drain_workqueue() and there better not be anything in the workqueue
> anyway since all the ref counts are zero.

OK. Will remove it.

> > + destroy_workqueue(hbus->wq);
> > free_bus:
> > free_page((unsigned long)hbus);
> > return ret;
> > @@ -2615,6 +2626,8 @@ static int hv_pci_remove(struct hv_device *hdev)
> > irq_domain_free_fwnode(hbus->sysdata.fwnode);
> > put_hvpcibus(hbus);
> > wait_for_completion(&hbus->remove_event);
> > + drain_workqueue(hbus->wq);
>
> Same here -- drain_workqueue() isn't needed. The workqueue
> must be empty anyway since the remove_event has completed
> and the ref counts will all be zero.

Will remove it.

> > + destroy_workqueue(hbus->wq);

I'm going to post a v2 patchset tomorrow.

Thanks,
-- Dexuan
\
 
 \ /
  Last update: 2018-03-05 06:12    [W:0.084 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site