[lkml]   [2018]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/2] Add HiSilicon INNO USB2 PHY driver support
It adds device tree bindings and driver support for HiSilicon INNO USB2
PHY device, which can be found on HiSilicon STB SoC Hi3798CV200.

Changes for v4:
- Change device tree bindings to define each PHY port as a child node,
and therefore instead of adding a custom .of_xlate, we can use
of_phy_simple_xlate. Also #phy-cells is 0 now, and consumers can
refer to the phy without any number cell in phandle.
Changes for v3:
- Make combphy device be child of peripheral controller and use 'reg'
property for mapping combphy configuration register.

Changes for v2:
- Move DT bindings into a separate patch.
- Rename hisi_inno_phy_start() to hisi_inno_phy_init() for aligning
name with .init hook.

Pengcheng Li (2):
dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY
phy: add inno-usb2-phy driver for hi3798cv200 SoC

.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 72 ++++++++
drivers/phy/hisilicon/Kconfig | 10 ++
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 +++++++++++++++++++++
4 files changed, 280 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c


 \ /
  Last update: 2018-03-05 03:41    [W:0.067 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site