lkml.org 
[lkml]   [2018]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv4 03/10] mfd: ti-lmu: use managed resource for everything
Date
This replaces all remaining unmanaged resources with device
managed ones, so that the remove function is no longer needed.
This makes the code slightly shorter and fixes two problems:

1. The hardware is disabled after the child devices have
been removed. Previously there was a potential race
condition.
2. The hardware is disabled when mfd_add_devices fails
during probe.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
drivers/mfd/ti-lmu.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c
index e14cb9f41b44..2ee09d099832 100644
--- a/drivers/mfd/ti-lmu.c
+++ b/drivers/mfd/ti-lmu.c
@@ -47,8 +47,9 @@ static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
return 0;
}

-static void ti_lmu_disable_hw(struct ti_lmu *lmu)
+static void ti_lmu_disable_hw(void *data)
{
+ struct ti_lmu *lmu = data;
if (lmu->en_gpio)
gpiod_set_value(lmu->en_gpio, 0);
}
@@ -205,6 +206,10 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
if (ret)
return ret;

+ ret = devm_add_action_or_reset(dev, ti_lmu_disable_hw, lmu);
+ if (ret)
+ return ret;
+
/*
* Fault circuit(open/short) can be detected by ti-lmu-fault-monitor.
* After fault detection is done, some devices should re-initialize
@@ -214,17 +219,8 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)

i2c_set_clientdata(cl, lmu);

- return mfd_add_devices(lmu->dev, 0, data->cells,
- data->num_cells, NULL, 0, NULL);
-}
-
-static int ti_lmu_remove(struct i2c_client *cl)
-{
- struct ti_lmu *lmu = i2c_get_clientdata(cl);
-
- ti_lmu_disable_hw(lmu);
- mfd_remove_devices(lmu->dev);
- return 0;
+ return devm_mfd_add_devices(lmu->dev, 0, data->cells,
+ data->num_cells, NULL, 0, NULL);
}

static const struct i2c_device_id ti_lmu_ids[] = {
@@ -240,7 +236,6 @@ MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);

static struct i2c_driver ti_lmu_driver = {
.probe = ti_lmu_probe,
- .remove = ti_lmu_remove,
.driver = {
.name = "ti-lmu",
.of_match_table = ti_lmu_of_match,
--
2.16.2
\
 
 \ /
  Last update: 2018-03-30 19:27    [W:0.177 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site