lkml.org 
[lkml]   [2018]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v2 02/10] regulator: add support for SY8106A regulator
On Tue, Feb 6, 2018 at 12:48 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> SY8106A is an I2C attached single output regulator made by Silergy Corp,
> which is used on several Allwinner H3/H5 SBCs to control the power
> supply of the ARM cores.
>
> Add a driver for it.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> [Icenowy: Change commit message, remove enable/disable code, add default
> ramp_delay, add comment for go bit]
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> Changes in v2:
> - Dropped the enable/disable code.
> - Added default ramp_delay value.
> - Added comment for the "go bit".
>
> drivers/regulator/Kconfig | 8 +-
> drivers/regulator/Makefile | 2 +-
> drivers/regulator/sy8106a-regulator.c | 168 ++++++++++++++++++++++++++++++++++
> 3 files changed, 176 insertions(+), 2 deletions(-)
> create mode 100644 drivers/regulator/sy8106a-regulator.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index b27417ca188a..70227230bca2 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -792,6 +792,13 @@ config REGULATOR_STW481X_VMMC
> This driver supports the internal VMMC regulator in the STw481x
> PMIC chips.
>
> +config REGULATOR_SY8106A
> + tristate "Silergy SY8106A regulator"
> + depends on I2C && (OF || COMPILE_TEST)
> + select REGMAP_I2C
> + help
> + This driver supports SY8106A single output regulator.
> +
> config REGULATOR_TPS51632
> tristate "TI TPS51632 Power Regulator"
> depends on I2C
> @@ -966,4 +973,3 @@ config REGULATOR_WM8994
> WM8994 CODEC.
>
> endif
> -
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 19fea09ba10a..7564664c64df 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
> obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
> obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
> obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
> +obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
> obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
> obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
> obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
> @@ -124,5 +125,4 @@ obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
> obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
> obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
>
> -

Extra whitespace change. Otherwise,

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

> ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG

\
 
 \ /
  Last update: 2018-03-30 10:04    [W:0.155 / U:2.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site