lkml.org 
[lkml]   [2018]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/8] DT: arm: Add Renesas RZN1D-DB Board base file
On Thu, Mar 29, 2018 at 08:47:03AM +0100, Michel Pollet wrote:
> This adds a base device tree file for the RZN1-DB board, with only the
> basic support allowing the system to boot to a prompt. Only one UART is
> used, with only a single CPU running.
>
> Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
> ---
> arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
>
> diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> new file mode 100644
> index 0000000..a462b1a
> --- /dev/null
> +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZN1D-DB Board
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "r9a06g0xx.dtsi"
> +
> +/ {
> + model = "RZN1D-DB Board";
> + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032", "renesas,rzn1";
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> + aliases {
> + serial0 = &uart0;
> + };
> +};
> +&uart0 {
> + status = "okay";
> +};

Please add a blank line between nodes.
Please use "ARM: dts: " as the patch prefix.

\
 
 \ /
  Last update: 2018-03-30 09:27    [W:0.035 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site