lkml.org 
[lkml]   [2018]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH AUTOSEL for 4.14 25/84] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
    Date
    From: "Andrew F. Davis" <afd@ti.com>

    [ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ]

    The correct DT property for specifying a GPIO used for reset
    is "reset-gpios", fix this here.

    Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board")

    Signed-off-by: Andrew F. Davis <afd@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
    Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
    ---
    arch/arm/boot/dts/am335x-pepper.dts | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
    index 03c7d77023c6..9fb7426070ce 100644
    --- a/arch/arm/boot/dts/am335x-pepper.dts
    +++ b/arch/arm/boot/dts/am335x-pepper.dts
    @@ -139,7 +139,7 @@
    &audio_codec {
    status = "okay";

    - gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
    + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
    AVDD-supply = <&ldo3_reg>;
    IOVDD-supply = <&ldo3_reg>;
    DRVDD-supply = <&ldo3_reg>;
    --
    2.14.1
    \
     
     \ /
      Last update: 2018-03-04 01:25    [W:6.007 / U:0.324 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site