lkml.org 
[lkml]   [2018]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
Date
From
Subject
Le 2018-03-20 09:52, Marc Zyngier a écrit :
> On 17/03/18 23:28, Paul Cercueil wrote:
>> Add documentation about how to properly use the Ingenic TCU
>> (Timer/Counter Unit) drivers from devicetree.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>> .../bindings/clock/ingenic,tcu-clocks.txt | 42
>> ++++++++++++++++
>> .../bindings/interrupt-controller/ingenic,tcu.txt | 39
>> +++++++++++++++
>> .../devicetree/bindings/mfd/ingenic,tcu.txt | 56
>> ++++++++++++++++++++++
>> .../devicetree/bindings/timer/ingenic,tcu.txt | 41
>> ++++++++++++++++
>> 4 files changed, 178 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> create mode 100644
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> create mode 100644
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> create mode 100644
>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>
>> v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
>> added content.
>>
>> diff --git
>> a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> new file mode 100644
>> index 000000000000..471d27078599
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> @@ -0,0 +1,42 @@
>> +Ingenic SoC TCU binding
>> +
>> +The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It
>> features 8
>> +channels, each one having its own clock, that can be started and
>> stopped,
>> +reparented, and reclocked.
>> +
>> +Required properties:
>> +- compatible : One of:
>> + * ingenic,jz4740-tcu-clocks,
>> + * ingenic,jz4770-tcu-clocks,
>> + * ingenic,jz4780-tcu-clocks.
>> +- clocks : List of phandle & clock specifiers for clocks external to
>> the TCU.
>> + The "pclk", "rtc" and "ext" clocks should be provided.
>> +- clock-names : List of name strings for the external clocks.
>> +- #clock-cells: Should be 1.
>> + Clock consumers specify this argument to identify a clock. The
>> valid values
>> + may be found in <dt-bindings/clock/ingenic,tcu.h>.
>> +
>> +Example:
>> +
>> +/ {
>> + tcu: mfd@10002000 {
>> + compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> + reg = <0x10002000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10002000 0x1000>;
>> +
>> + tcu_clk: clocks@10 {
>> + compatible = "ingenic,jz4740-tcu-clocks";
>> + reg = <0x10 0xff0>;
>> +
>> + clocks = <&ext>, <&rtc>, <&pclk>;
>> + clock-names = "ext", "rtc", "pclk";
>> +
>> + #clock-cells = <1>;
>> + };
>> + };
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and
>> other
>> +children nodes, see
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> diff --git
>> a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..7f3af2da77cd
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> @@ -0,0 +1,39 @@
>> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
>> +
>> +Required properties:
>> +
>> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings
>> are:
>> + * ingenic,jz4740-tcu-intc
>> + * ingenic,jz4770-tcu-intc
>> + * ingenic,jz4780-tcu-intc
>> +- interrupt-controller : Identifies the node as an interrupt
>> controller
>> +- #interrupt-cells : Specifies the number of cells needed to encode
>> an
>> + interrupt source. The value shall be 1.
>> +- interrupt-parent : phandle of the interrupt controller.
>> +- interrupts : Specifies the interrupt the controller is connected
>> to.
>> +
>> +Example:
>> +
>> +/ {
>> + tcu: mfd@10002000 {
>> + compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> + reg = <0x10002000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10002000 0x1000>;
>> +
>> + tcu_irq: interrupt-controller@20 {
>> + compatible = "ingenic,jz4740-tcu-intc";
>> + reg = <0x20 0x20>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + interrupt-parent = <&intc>;
>> + interrupts = <15>;
>> + };
>> + };
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and
>> other
>> +children nodes, see
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> diff --git a/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..5742c3f21550
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> @@ -0,0 +1,56 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
>> +----------------------------------------------------------
>> +
>> +For a description of the TCU hardware and drivers, have a look at
>> +Documentation/mips/ingenic-tcu.txt.
>> +
>> +The TCU is implemented as a parent node, whose role is to create the
>> +regmap, and child nodes for the various drivers listed in the
>> aforementioned
>> +document.
>
> You're describing the Linux driver here. Please stick to a description
> of the HW.

There's already a whole file that describes the hardware. I just wanted
to mention
that there should be child nodes, but I can rephrase that.

>> +
>> +Required properties:
>> +
>> +- compatible: must be "ingenic,tcu", "simple-mfd", "syscon";
>
> Without any provision for an SoC version? Seems bold...

Well, we don't use the "ingenic,tcu" compatible string, the parent node
is just
here to create the regmap (in this version of the patchset, it will
probably change
later).

>> +- reg: Should be the offset/length value corresponding to the TCU
>> registers
>> +- #address-cells: Should be <1>;
>> +- #size-cells: Should be <1>;
>> +- ranges: Should be one range for the full TCU registers area
>> +
>> +Accepted children nodes:
>> +-
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> +- Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> +- Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>
> It is slightly confusing that you have 3 files named ingenic,tcu.txt.
> How about ingenic,tcu-intc.txt and ingenic,tcu-timer.txt (amending the
> binding for the timer)?

Right. I'll change that.

>> +
>> +
>> +Example:
>> +
>> +/ {
>> + tcu: mfd@10002000 {
>> + compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> + reg = <0x10002000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10002000 0x1000>;
>> +
>> + tcu_irq: interrupt-controller@20 {
>> + compatible = "ingenic,jz4740-tcu-intc";
>> + reg = <0x20 0x20>;
>> + ...
>> + };
>> +
>> + tcu_clk: clocks@10 {
>> + compatible = "ingenic,jz4740-tcu-clocks";
>> + reg = <0x10 0xff0>;
>> + ...
>> + };
>> +
>> + tcu_timer: timer@10 {
>> + compatible = "ingenic,jz4740-tcu";
>> + reg = <0x10 0xff0>;
>> + ...
>> + };
>> + };
>> +};
>> +
>> +For more information about the children node, refer to the documents
>> listed
>> +above in the "Accepted children nodes" section.
>> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..f910b7e96783
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> @@ -0,0 +1,41 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>> +---------------------------------------------
>> +
>> +Required properties:
>> +
>> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
>> + * ingenic,jz4740-tcu
>> + * ingenic,jz4770-tcu
>> + * ingenic,jz4780-tcu
>> +- interrupt-parent : phandle of the TCU interrupt controller.
>> +- interrupts : Specifies the interrupts the controller is connected
>> to.
>> +- clocks : List of phandle & clock specifiers for the TCU clocks.
>> +- clock-names : List of name strings for the TCU clocks.
>> +
>> +Example:
>> +
>> +/ {
>> + tcu: mfd@10002000 {
>> + compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> + reg = <0x10002000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10002000 0x1000>;
>> +
>> + tcu_timer: timer@10 {
>> + compatible = "ingenic,jz4740-tcu";
>> + reg = <0x10 0xff0>;
>> +
>> + clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk 2>, <&tcu_clk 3>,
>> + <&tcu_clk 4>, <&tcu_clk 5>, <&tcu_clk 6>, <&tcu_clk 7>;
>> + clock-names = "timer0", "timer1", "timer2", "timer3",
>> + "timer4", "timer5", "timer6", "timer7";
>> +
>> + interrupt-parent = <&tcu_irq>;
>> + interrupts = <0 1 2 3 4 5 6 7>;
>> + };
>> + };
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and
>> other
>> +children nodes, see
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>>
>
> Thanks,
>
> M.

\
 
 \ /
  Last update: 2018-03-28 17:10    [W:0.234 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site